Best Creality 3D 3D Printer Parts Accessories in 2026

🎈【Quality Assurance】100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.

🎈【Work Better】Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.

🎈【Improved Performance】The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.

UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New "Metal Anodised Aluminum" Upgrade Kit.

STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.

EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.

The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.

The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed.

Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃

PC4-M6 Fittings：thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm

PC4-01 Fittings：thread about 1/8, The upper parts can be inserted into 4MM pipe and self locking,the lower screw thread is 1/8 teeth

PC4-01 Fittings:Silver; PC4-M6 Fittings; Gold

[UPGRADING]: Original Aluminum Drive Feed for Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5, it is stable and durable.

[REPLACEMENT]: MK8 extruder drive feed kit, can replace acrylic parts of Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5.

[Easy TO USE]:for 1.75mm filament of 3D printer MK8 bowden extruder frame

ATTENTION BEFORE USE：Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.

ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.

EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.

ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.

EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.

CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.

Creality Upgrade Heater Block Silicone Cover Instead of Heat Insulation Cotton

Non-stick silicone material made

Keep the hotend temperature extremely stable.

Brand new cr-10 upgrades 3d printer parts supporting rod set and high quality 3d accessories of Creality original. This kit is an all metal construction including the L brackets very strong. It's a great product and does what it's supposed to add rigidity to your printer.

Designed for upgrading 3D Printer CR-10 300 and CR-10S 300 reduces the vibration made by printing, supporting rod kit makes 3d printing more stable.

Durable and well appointed, package included all the necessary parts for supporting rod set, this frame support kit will satisfy your requirement to upgrade the old machine.

Compatibility: fit for most of the sizes 3D Printer extruder nozzles, such as MakerBot, RepRap, Creality CR-10, Ender 3, Prusa I3, Anet A8, E3D, MK8, MK10, etc.

Package Included: 2 Pcs 0.15 mm, 2 Pcs 0.25 mm, 5 Pcs 0.35mm, 5 Pcs 0.4 mm, 2 Pcs 0.5mm cleaning needles, total 16Pcs 3D printer nozzle cleaning needles in a bottle and 2 Pcs tweezers with straight and curved shape tip.

Material: the needles and tweezers are made of high-quality stainless steel material. The needles are sturdy, durable, and flexible, easy to bend but not broken. The tweezers tip are sharp, non-slip, anti-static, non-magnetic, easy handling control.

Package Included: 10 Pcs 0.4mm 3D printer nozzle cleaning needles in a bottle.

Compatibility: fit for most of the 0.4mm 3D Printer extruder nozzles, such as MakerBot, RepRap, Creality CR-10, Ender 3, Prusa I3, Anet A8, E3D, MK8, MK10, etc.

Material: the needles and tweezers are made of high-quality stainless steel material. The needles are sturdy, durable and flexible, easy to bend but not broken.

UPGRADED METAL EXTRUDER: Now without the pneumatic connector and the small gaps created inside, now you can print flexible, TPU, without a hitch!

ADVANTAGES, our extruder drive is you have stronger pressure on the gear arm for the filament into the printer nozzle resulting in less filament slip and accurate extrusion. Also, the spring tension on our new extruder is adjustable, by turning a small hex nut it will put more pressure so versatile for all kinds of filaments.

Compatible with virtually all Creality 3D Printer: Ender 3, Ender 3 Pro, Ender 3 X, Ender 3 V2, Ender 3 Pro X, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. This upgrade kit is also compatible with other 3D printers except the printers using a direct drive setup.

【Stainless nozzle cleaning needles 0.4mm 】This nozzle cleaning needles is made of stainless steel material, which is also flexible not easy to break , enough for a long time using. Note: Do not use too much force, it is easy to hurt yourself

【Two different Length 3D Printer Nozzle Cleaning Kit】We kindly prepared two types cleaning needles to meet your needs . The 105mm needles can clean the nozzles as well as other small parts, such as throat directly .The 70mm needs is mainly for nozzles cleaning , due to its shortness , which is more tougher and harder . Suggestion:Heat the nozzle to 200 ℃ or more before cleaning with a needle!

【Twist Handle and Sharp Needle Tip Design】The needle has a sharp to clean 0.4mm hotend nozzle, with a special handle you can easily twist it in during use. Note: Be careful your hands when usintg this 0.4mm Needles Cleaner

【Increased Accuracy】Compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.

【Stable Performance】 Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation.

【Smooth Running】 Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.

It is suitable for ender-3 ender -3s or CR-10 CR-10S printer use , and also suitable for other printers which also use 5mm bore and 20T GT2 pulleys

This pulley is used for 6mm width Gt2 belt

Package: 5pcs pulleys

Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY

MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS

CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE

Module Size: 27mm/1.06in x 15mm/0.59in; Cable Length: 100mm/3.94in; Weight: 5g

Package Included: 1pcs stepper motor parallel modules with 1pcs 100mm cables, easy to connect.

Application: special design for stepper motor-side parallel, a driver drives two motors, put them in-line (series) with the motor.

Original Aluminum Drive Feed for Creality 3D CR-7, CR-8, CR-10, CR-10 S4, CR-10 S5, it is stable and durable.

MK8 extruder drive feed kit, can replace acrylic parts of CR-10, CR-10 S4, CR-10 S5.

Full Metal Aluminum Alloy

Upgraded 2018 Which Heating Much Faster and with 12V Voltage 18A 220W

Original Parts / Accessories Replacement for Creality 3D Printer CR-10 / CR-10S

Hot Bed Size:310x310x3mm，Hotbed With Cable Which be Installed Well.

Ender 3 Rubber belt

belt for ender-3 X axis Y axis

timing belts

⭐Not Easy to Lose Step: The extruder adopts a double-gear double pneumatic joint extrusion structure, which makes the extrusion pressure greater, ensuring smooth feeding and not easy to lose step.

⭐High-quality Material: The product material adopts brand-new imported aviation aluminum material, and is processed by CNC imported from Japan.

⭐Widly Application: Not only suitable for CR10S PRO original machine, CR-10S PRO's original aluminum alloy driver, but also can be installed in Ender-3, Ender 3pro, Ender 5 and so on.

100% Creality Original

X axis 765x6mm Y axis 720x6mm Belt for Ender 3

Material: Rubber

EASY REMOVAL OF PRINTS: CR-10 upgrade parts, simply prints on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible.

SIZE: 300x300mm magnetic bed. Suitable for all FDM printer models, and all heated and non-heated 3D printer beds.

DURABILITY & EASY CLEAN: CR-10 bed surface is capable to work at 70ºC. Easy clean with alcohol.

Material: Aluminum alloy. Great CNC finishing Machining, and anodizing surface Treatment.

Tensioner is Already assembled, But it still need you to install it onto your printer with T nuts and screws, Useful upgrade parts for for 2020 Aluminum profiles X axis 3D printer, you can adjust the belt freedom,more better than original.

Used for 2020 aluminim profiles X axis 3D Printers, Compatible with Creality Ender-2/Ender 3/ Ender 3 Pro/Ender-3 V2/Ender 3s/ Ender 5/ CR10 / CR10S/ CR10 S5 3D printers.

【Quality Assurance】Made of high-quality spring steel, the flexible steel spring PEI Sheet won't kink or warp when flexing. The Hot Bed Plate is made of high-quality Aluminum, which has excellent thermal conductivity, pressure resistant and thermal resistance.

【Great Adhesion & Easy Removal】Print molds onto PEI build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety. Easy to remove the prints just slightly flex it repeatedly to pop your prints right off.

【Perfect design】The counter-bore design ensures the flatness of plate, saves the printing space and avoids colliding with the nozzle. The design of the positioning hole makes the PEI Sheet installation more convenient.

Super Large Washing and Curing Size: Creality upgraded 10.1 inch washing and curing machine for 3d resin printer has a large washing/curing space, the maximum processing size can reach up to 9.5x6.3x7.9 inch/240x160x200mm, which is much larger than the other products. It can meet your processing needs of larger printing models.

Washing and Curing 2 in 1: The 2 in 1 design enables the washing and curing of 3D printing models in one machine. UW-02 is a professional solution that can save you time and make washing and curing more efficient. It has two speeds- Fast/Medium, and the time of 2-30min can be adjusted freely. The three sensitive touch buttons with high-definition LCD display is simple and convenient.

Multiple Washing Methods: The washing and curing station has two washing methods: 1. Basket Type Cleaning- Remove the model and put it in the basket for direct cleaning; 2. Platform Suspension Cleaning- Directly hung on the platform frame to reduce contact with resin. The large magnetic fan blades enable a super large vortex and high speed washing which can powerfully remove excess resin on the surface of the models.