Best Hocenway in 2026

It is suitable for ender-3 ender -3s or CR-10 CR-10S printer use , and also suitable for other printers which also use 5mm bore and 20T GT2 pulleys

This pulley is used for 6mm width Gt2 belt

Package: 5pcs pulleys

Only used for 32bits motherboard like version 4.2.2, 4.2.7. Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro / Ender 6 / CR-10S PRO/ CR-10 V2 V3/ENDER 3 MAX. But the installation bracket is only used for Ender 3 series, as Ender 6 and cr10s pro printer already have the sensor installation holes or bracket

Independent Modularized Design: it is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique; Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments.

Precise Detection: Blue LED indicates normal filament feed-in; Blue LED turns off when filament runs out.

Material: Aluminum alloy. Great CNC finishing Machining, and anodizing surface Treatment.

Tensioner is Already assembled, But it still need you to install it onto your printer with T nuts and screws, Useful upgrade parts for for 2020 Aluminum profiles X axis 3D printer, you can adjust the belt freedom,more better than original.

Used for 2020 aluminim profiles X axis 3D Printers, Compatible with Creality Ender-2/Ender 3/ Ender 3 Pro/Ender-3 V2/Ender 3s/ Ender 5/ CR10 / CR10S/ CR10 S5 3D printers.

This motor is made by Moons, founded in 1994, is a global Top 3 stepper motor manufacturer with the yearly shippment of more than 10 million hybrid stepper motors. Highly recognized for High Performance and Quality Products

20mm size high torque enhanced version and good thermal control ability. Super high quality internal gears, compatible with 12V and 24V

The winding design of up to 130 ° ensures that the motor will not lose step when heating up, making your printing more stable

Made from Spring steel material and size 138x85x0.4mm, Surface Brushed treatment, Print model is closer to the steel plate, easy to remove printed model and Not demould in printing.

Wear-resistant, High quality steel plate soft magnetism, Spring steel sheet consist of alloy, anti-wearing/scraping, more dorable.

Reserved double handles, it is easy and convenient to pick the steel sheet up.

Material: Aluminum Alloy; Number of tooth: 80T; 5mm Bore size, for 6mm width belt use

widely applications, it can be used for CNC Machines, 3D Printers, Drilling machines, and so on

This pulleys are compatible with Voron 2.4 3D Printer. If you use this pulley to your voron 2.4 3D printer, This link is only including 1piece pulley, Pls buy 4 quantity as one Voron printer needs 4pcs pulleys in total.

HEATER: max temperature is 500C degree, 450C Degree Working stably ; Power: 24V 65W, cartridge size: OD6mm x15mm, apply high quality and high temperature green color silicone cable, more dorable and longer lifetime , and using 15mm length stainless steel cover does not interfere with the installation of other accessories like leveling sensor, fan.

THERMISTOR: NTC100K 3950B, cartridge size: OD3mm x15mm, using imported chip, can work at -40°C ~300°C

Specially designed to be Compatible with Voron V2.4 V0.1 V1.8 V6 PT100 Dragon Hotend 3D Printer

These nuts are made of high quality brass material, durable and useful

Inside thread is M3, OD:5mm, Height: 4mm

inserts are widely used in many heat injection area for fixing holes, these nuts have high quality, high precision and clean

Gantry plate is made from Aluminum material, black treatment, wheels shell are made from POM

Compatible with 2040 and 4040 V-Slot aluminum profiles or Linear Rail

Our POM wheels are machined with high precision, working smoother, and less friction

Size: 23x16x11.5mm, there is a 3.1mm ID hole for OD3mm temperature sensor

Made from Premium copper material with surface Nickel plating,Rated to 500 °C for even the most demanding tasks,Compatible with all filaments,from basic PLAs to custom high-grade PAEKs

Copper material has good thermal conductivity and high strength and high temperature.

Waterproof & Fireproof: It can store 3D printers to prevent dust, water, fire and heat Use. Protect family members: As the printer has mechanical moving Hotbed and high-temperature nozzles, which can be Potential damage to hands and body. Adding protective cover can avoid children from touching the machine by mistake.

Providing stable printing environment to Improve printing quality: reduce the interference of external environment on the printer, especially the temperature difference interference. Keep warm and reduce heat loss, reduce warping and lift Increase the printing success rate and printing effect, Especially for printing of ABS, PETG and other high-temperature filaments.

Add a brown Removable filter membrane: used for filtering ultraviolet rays with laser engraving head or UV curable printer to protect eyes; Add Smoke exhaust interface and smoke pipe: It is helpful to discharge harmful gas and smoke. And 5W LED light with USB plug: convenient for users to observe the working state of the machine at dark environment

Made from high temperature silicone material, can be working up to 280C degree

It is Only compatible with Dragon Hotend heater block

they are from Phaetus, high precision

Gantry plate is made from Aluminum material, black treatment, wheels shell are made from POM

Compatible with 20x20 V-Slot aluminum profiles or Linear Rail

It is assembed with wheels, very easy to install it

This Kit is Upgraded, the heating block upgraded to chromium-zirconium copper nickel plating treatment, high temperature resistance 500C degree printing, fast heat conduction.

The radiator and heat break can be disassembled and locked by the side fixed shaft to reduce the use cost.

The interference of the TC4 titanium heatbreak tube and the heat block increase s the step surface at the bottom of the throat to completely eliminate the phenomenon of falling off and reduces the possibility of leakage.

【INTEGRAL FRAME RIGID STRUCTURE】: 1:Protect the heat break from external force. 2:One-hand nozzle replacement more simplest without grasping the hotend. 3:Hollow-carved design,increase air circulation without obstacle

【BI-METAL HEATBREAK】:High quality titanium alloy + plated copper,real bimetal material Copper and Titanium TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction

PLATED COPPER HOT BLOCK】: Premium material with surface Nickel plating,Rated to 550 °C for even the most demanding tasks,Compatible with all filaments,from basic PLAs to custom medical-grade PAEKs

MKS servo42C is a product developed by MKS to meet market demand. The closed-loop motor uses the motor's rotation angle feedback to the drive circuit to detect whether every step that should be taken has been taken to prevent losing steps. If a closed loop occurs, the motor will make up or lose steps through the feedback information, and the blue LED on the closed loop module will light up.

Support 1-256 subdivision,odd subdivision (such as 11 subdivision) is also available. And support motors with 0.9 degree or 1.8 degree. Maximum speed 1000RPM. With usart interface, you can connect the computer by serial port, for parameter adjustment and query.

Position /speed/torque closed-loop, it can run at high speed without losing step. Easy to install and wire. The max printing speed can reach 150-180mm/S. Field-Oriented control, low noise, low vibration and low calorific. 4 Half bridge driver with 8 MOSFET, high operating efficiency. 14Bits magnetic encoder, high angle resolution.

This board kit is designed and open sourced by Mr. Hartk, Thanks here. More information, please check this forume: https://github.com/hartk1213/MISC/tree/main/PCBs/Stealthburner_Toolhead_PCB

This version of SB toolhead is the latest compatible with Stealthburner and CW2 extruder to keep all the cables clean and more convenient for maintenance.

The board is Soldered and ready to use, we also provide some pins and connectors for customer to connect their wires

GLOW MULTICOLOR CHANGE - Every 10 Meters color change with Green,Blue,Purple and Pink. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect, then glow blue filament, glow deep blue purple filament, shiny glow green filament, glow red filament, glow pink filament

UPGRADE GLOW FILAMENT - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding

HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm

3D printer filament (1.75mm diameter, red; 1 kg spool); designed to fit most common 3D printers (check spool size for compatibility)

Made of PLA, a commonly used thermoplastic material known for its lower melting temperature and ease of use (no heated bed required), plus it’s low-warp, odorless, and offers a glossy-type finish

Engineered to reduce jamming

Newest Upgraded and More Convenient: Newest Wash and Cure machine added lens to UV lamp beads, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table and added bottom reflector, the bottom curing has no dead ends, so that the entire model is cured more thoroughly

2-In-1 Wash and Cure Station: Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing. It's a professional solution to the messy clean up job of your fabulous prints and also helps reduce the clutter on your desk. 1-60min time adjustable, customize knob cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs

Widely Compatibility: The ANYCUBIC wash and cure machine is a great addition to most type of regular resin printer, Compatible with most LCD/DLP/SLA 3D printers such as QIDI Shadow, NOVA, Mars series and other regular resin printers with similar build volume size as it does for photon series, this Wash & Cure machine has opened up a whole new world of 3d printing for you and greatly enhance your workflow

Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.

Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.

Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.

Compatible with ELEGOO Mars 3 and Mars 3 Pro Resin 3D printer.

Film dimensions: 146*195mm, Film thickness: 0.127mm. Note:Please remove the double-sided protective film before use.

Compared with FEP release film, PFA release liner film has higher temperature resistance and printing success rate, and less release tension for easier to remove models.

GREAT VALUE: sharp quality tweezers and 10pcs of 0.40mm nozzle cleaning needles packed in one safe container!

Anti-Static, Non-Magnetic CURVED PRECISION TWEEZERS; 3D printing tweezers great for nozzle maintenance and cleaning excess support material

10 pcs of 0.40mm diameter FLEXIBLE stainless steel needles; Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears

Durable, rigid construction; Solid rivets keep the blades in place, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings!

Long knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying

Stiff, hardened stainless steel blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them

Constant Temperature: Keep a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability.

Fit for Ender 3/Ender 3 Pro/Ender 3S / Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo /Ender 3 Max/CR-6 SE/CR 20/CR 20 Pro.

Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well.

Wire Length: 45.27-46.85inch /1.15-1.19m. Package includes 5 thermistors.

Note: Not fit for Ender 3 V2/Ender 3 MAX/Ender-3 Max Neo/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3d printer's thermistor and confirm whether this thermistor is compatible with yours before buying.

Used for heated bed or hot end.

The UV LED lamp uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual. NOTE: It can't be used to cure liquid resin directly and can't cure filament prints.

The 360° rotating solar turntable use power from UV lighting /nature solar Power/fluorescent lighting, can't use batteries for power.Maximum display /rotate weighing less than 500g/1.1Pound which is also suggested size that the light can cure. TIPS: Close to light will help to speed up and rotate heavier.

The resin can be cured in 10-15 seconds from a distance of 5 cm from the light. NOTICE: thicker parts require more time to cure. What's more the dimension of the UV light is 3.35*4.53*3.74" and the turntable diameter is 3.5".

100% Creality Original--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.

Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.

Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Very easy to take off the models, NO tools to remove models

Use clips to fix the glass plate on the hot bed.

Higher temperature higher sticky. The models will stick on bed firmly when temperature is high

Easy to Remove Model within 1 Minute: The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.

High Viscosity and Strong Adhesion: Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.

0.15MM of Flatness Recovery Model: This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.