Best Lab Heat Blocks in 2026

Size: 23x16x11.5mm, there is a 3.1mm ID hole for OD3mm temperature sensor

Made from Premium copper material with surface Nickel plating,Rated to 500 °C for even the most demanding tasks,Compatible with all filaments,from basic PLAs to custom high-grade PAEKs

Copper material has good thermal conductivity and high strength and high temperature.

【Upgrade Heater Block】: The Upgraded Plated Copper Heater Block is small in size and light in weight, only 17.7g, and can withstand high temperature up to 500℃, with faster thermal conductivity;

【Upgrade Nozzle】: The nozzle is made of hardened steel and quenched and hardened to make it more wear-resistant and extend its service life; the inner wall roughness of the throat and nozzle is RA0.4, which reduces the phenomenon of blockage and improves the printing quality; the nozzle structure is upgraded, and the heating block and throat are connected by threads, which solves the problem of falling off and can be disassembled and replaced, reducing the use cost.

【Design Upgrade】: Aluminum alloy radiator and throat are fixed with side shaft, which can be disassembled and installed conveniently, reducing replacement cost; the throat structure is upgraded also, and the step limit is added to cooperate with the heating block, which perfectly solves the problems of leakage and falling off.

Slicone sock for Bambu Lab X1 P1P 3d printer!

Heater Block Silicone Cover Instead of Heat Insulation Cotton

Non-stick silicone material made.

[ COMPATIBILITY ] - This Hotend Kits Fits Bambu Lab P1P, Bambu Lab X1/ X1 Carbon/ X1-Carbon Combo 3D Printer. Please kindly noted that the ceramic heater and thermistor are not included, you can use the ones removed from your original Bambu Lab 3D printer hotend.

[ UPGRADED STRUCTURE ] - The original Bambu Lab X1/ P1P hotend kits is all in one integrated, if any issues with it, then you may need to replace whole hotend kits, high cost. But our heatbreak, throat tube and nozzle are removable , just find the problem and replace defective parts only, save time and money.

[ UPGRADED MATERIAL ] - The original heating block is made of copper, ours is made of chromium zironium copper nickel plating. This material is high temperature resistant, up to 500℃, with fast thermal conductivit, suitable most of 1.75mm filament like PLA, ABS, ASA, PC, TPU, PLA-CF, PETG, PET-CF, PAHT-CF, PA6-CF, PETG-CF.

【All Metal Design】: The heater block is upgraded from brass to chromium-zirconium copper nickel-plated, which is small in size and light in weight, and can withstand high temperature up to 500℃, with faster thermal conductivity.

【Upgrade Nozzle】: The nozzle is made of hardened steel and quenched and hardened to make it more wear-resistant and extend its service life; the inner wall roughness of the throat and nozzle is 0.4MM, which reduces the phenomenon of blockage and improves the printing quality; the nozzle structure is upgraded, can be disassembled and replaced, reducing the use cost.

【Wide Compatible】: The product is compatible with Lab X1 3D Printer, High Temperature kit is widely compatible with various printing filament materials, such as PLA, ABS, PTEG, TPU, PP, PC, Nylon, PEDK, PEI, and other materials.

Nozzle: Hardened steel, brass, Nozzle size: 0.2mm, 0.4mm 0.6mm

Heating block: chromium zirconium copper

Radiator: aluminum alloy