Best Magswitch in 2026

STARTER KIT: Your ideal Feather Board that works with any push block for safe woodworking tablesaw cuts. Quick and easy with a low profile design for use with your smallest tablesaw or coping sled. Makes your diy crafts faster, safer and easier and is a great addition to your wood and carpenter equipment tools

UNIVERSAL MOUNTING BASE: The universal mounting base is the centerpiece of the carpentry workholding system. Simply add the desired wood working tool attachment, place on any steel saw bench or cast-iron welding table, and you are ready to start your framing and cabinet work

REVERSIBLE FEATHERBOARD: Our sturdy yet lightweight woodworking feather board jig is reversible for left and right hand feeds. Also infeed and outfeed applications. Add desired attachments to fit any router table track fence for safety and protection against kickbacks

Having issues finding a reliable welding ground clamp? Our magnetic ground clamps come with the new fin design which lowers temperature by 27 percent. The magnetic hold is very strong and will not slip off table easily during use. Simply place our heavy duty clamp on a clean work surface, turn on and start welding

SAVE TIME: Fast setup with instantly ground to any flat and round steel surface. Finned magnetic ground clamps let welders quickly set up with no prep, weld and move on to the next job. Finned clamp also increases tool longevity by keeping it cooler. No more searching for or creating a ground location. Use it with tig, spot, stick torch, fiber, arc welders

EXTRA PERKS: Stronger hold in the shear (vertical) position allows for use with a heavy gauge welding ground cable. Reusable to save welders time and money. No more tacking on tabs in large sheet-weld or pipe jobs. Does not require an electrical power source

All new fin design lowers temperature by almost 27-percent

Stronger hold in shear (vertical) position allows for use with heavy gauge ground cable

No more tacking on tabs and searching for ground location

All new fin design lowers temperature by almost 27-percent

Stronger hold in shear (vertical) position allows for use with heavy gauge ground cable

No more tacking on tabs and searching for ground location

MAGSQUARE: Hold and set just about anything, just about anywhere. With 150 lb strong holding force. These magnetic squares are the most versatile workholding and fixturing tool ever! Align and secure flat or round tubing pieces of steel to fabricate multi-angle holds

WELDERS HELPER: Our welding & heavy fabrication tools are engineered to drive productivity for professional welders, fabricators and pipefitters. Large sheet leveling, sheet de-stacking, fixturing, weld grounding, mounting, metalworking, notching, workholding, positioning, alignment, spatter, fitting and many more applications are performed significantly faster

ON/OFF SWITCH: The true ON and OFF capabilities create a platform that is more efficient, faster, safer and easier to use! Use it with tig, spot, stick torch, fiber, arc welders. Magnetic grip turns all the way off for quick release. No need to pry or fight magnet for precise positioning

Sets up in seconds and holds flat round or odd shaped pieces.

Magnetic on off Vise is perfect for holding small to medium size steel pieces while drilling, cutting, grinding and beveling etc.

Doubles as a multi angle work holding tool with all the fixed common angles you need

These new angle welding tools are more versatile than any other angle magnetic welding holder. The adjustable pivot allows for a holding angle range from 22 to 270 degrees. Each axis features strong magnet squares with a 200 lb holding force

Pivot Welder Angle - This magnetic holder for welding is excellent for repetitive work on uncommon odd angles. Built with a lock on the elbow, working fabricators and welders can easily secure their desired angle for all welding jobs. The elbow features indicators every 5 degrees

Double Welding Magnet - Each axis arm contains a magnet clamp enabling the tool to secure to a welding table or wall while simultaneously holding a metal sheet or pipe piece. These metal magnets have three open sides for incredible versatility and precision

PROFESSIONAL WOODWORKING EQUIPMENT: Vertical featherboard universally improves cutting results by holding down materials to ensure productivity on a table saw or bandsaw.

PROFESSIONAL WOODWORKING EQUIPMENT: Vertical featherboard universally improves cutting results by holding down materials to ensure productivity on a table saw or bandsaw.

REVERSIBLE MAGNET TOOL: Reversible magnet for functionality on either side of the workpiece.

The Thin Stock Jig Rip Guide attachment is the ultimate thin stock work holding tool - it's three tools in one! Built for use with the Magswitch Workholding system, the jig rip guide mounts to the Universal Mounting Base and MagJigs (not included)

Features a stepped side for most common sizes of 1/8, 1/4 and 3/8". The opposite side is sloped for odd sizes up to ¾ inch

Enhances safety by keeping your fingers away from the blade while also minimizing chatter for clean cuts and is low profile enough for use on your smallest tables

UNIVERSAL MOUNTING BASE: The universal mounting base is the centerpiece of the carpentry workholding system. Simply add the desired wood working tool attachment, place on any steel saw bench or cast-iron welding table, and you are ready to start your framing and cabinet work

UNIVERSAL MOUNTING BASE: The universal mounting base is the centerpiece of the carpentry workholding system. Simply add the desired wood working tool attachment, place on any steel saw bench or cast-iron welding table, and you are ready to start your framing and cabinet work

REVERSIBLE FEATHERBOARD: Our sturdy yet lightweight woodworking feather board jig is reversible for left and right hand feeds. Also infeed and outfeed applications. Add desired attachments to fit any router table track fence for safety and protection against kickbacks

Premium Home Improvement: This pocket-hole jig is a portable carpentry tool that makes strong joints

Angle Drill Woodworking Tools: Make lasting joints at several angles so you can reduce pocket hole size

Versatile Carpenter Tools: The included clamp adaptor helps the drill guide work with most clamps

Includes: (one) 48 Inch universal t-track bars

Features: T-tracks are equipped with a double-cut profile for hardware versatility and pre-drilled mounting holes for easy installation

Premium: Constructed out of extruded anodized 6463 aluminum, delivering a lightweight design that possesses an impressive strength to weight ratio, along with corrosion resistance and superior resilience

Includes: (4) 24” universal t-track bars

Features: t-tracks are equipped with a double-cut profile for hardware versatility and pre-drilled mounting holes for easy installation

Premium quality: constructed out of extruded anodized 6463 aluminum, delivering a lightweight design that possesses an impressive strength to weight ratio, along with corrosion resistance and superior resilience

Premium Home Improvement: Jig helps DIYers create pocket-hole joints in plywood from 1/2 to 1 1/2-inch thick

Secure Pocket-Hole Jig: Drill guide has an anti-slip surface; clamping technology adjusts for a secure fit

Simple Cabinet Woodworking Tools: Convenient vacuum adapter and onboard storage simplifies cleanup

𝗧𝗛𝗘 𝗠𝗢𝗦𝗧 𝗩𝗘𝗥𝗦𝗔𝗧𝗜𝗟𝗘 𝗖𝗔𝗕𝗜𝗡𝗘𝗧 𝗛𝗔𝗥𝗗𝗪𝗔𝗥𝗘 𝗝𝗜𝗚 – CHJ-MAX accurately installs cabinet knobs and pulls of virtually any length, and drills 32mm shelf pin holes. Works on even the longest cabinet door stile and rails, including shaker doors and recessed drawer fronts. Designed for drawer fronts up to 42" wide and hardware up to 38” center to center. Includes TP-CHJ, Long Pull & Shelf Pin Extensions, Rapid Center Extension, 5mm drill bit, depth stop and hard carrying case.

𝗧𝗛𝗘 𝗢𝗡𝗟𝗬 𝗝𝗜𝗚 𝗙𝗢𝗥 𝗦𝗛𝗔𝗞𝗘𝗥 𝗖𝗔𝗕𝗜𝗡𝗘𝗧𝗦 - Accurately install handles or knobs on any cabinet door and drawer front. Patent pending shaker spacers provide stability when drilling recessed (shaker style) drawer fronts.

𝗙𝗔𝗦𝗧 𝗔𝗡𝗗 𝗘𝗔𝗦𝗬 𝗧𝗢 𝗨𝗦𝗘 - Tighten thumb screws, hold, and drill. No clamps or marking needed. Take the stress out of installing hardware on your cabinets. Fully adjustable and reversible drill template, set once and repeat. Also installs shelf pin holes and hinge plates!

𝗠𝗢𝗦𝗧 𝗔𝗖𝗖𝗨𝗥𝗔𝗧𝗘 𝗢𝗡 𝗧𝗛𝗘 𝗠𝗔𝗥𝗞𝗘𝗧 - Patent pending True Calibration system with Perfect Match laser engraved rulers. Made and hand calibrated in California. DIY simplicity with professional durability.

𝗧𝗛𝗘 𝗢𝗡𝗟𝗬 𝗝𝗜𝗚 𝗙𝗢𝗥 𝗦𝗛𝗔𝗞𝗘𝗥 𝗖𝗔𝗕𝗜𝗡𝗘𝗧𝗦 - Accurately install handles or knobs on any cabinet door and drawer front. Patent pending shaker spacers provide stability when drilling recessed (shaker style) drawer fronts.

𝗙𝗔𝗦𝗧 𝗔𝗡𝗗 𝗘𝗔𝗦𝗬 𝗧𝗢 𝗨𝗦𝗘 - Tighten thumb screws, hold, and drill. No clamps or marking needed. Take the stress out of installing hardware on your cabinets. Fully adjustable and reversible drill template, set once and repeat. Also installs shelf pin holes and hinge plates!

【VARIOUS FISHING ACCESSORIES】- TOPFORT 251pcs fishing kit collects nearly all fishing accessories kits including Round Jig Heads, Offset Worm Hooks, Wacky Hooks, Fishing Hooks, Egg Sinker, Bullet Weights, Dipsey Swivel Sinkers, Round Split Shot, Fishing Float, Fishing Snaps, Fishing Swivels, Three-way Swivels, Rubber Egg Bobber Stops, Fishing Beads. The Fishing Hooks are especially suitable for smaller such as Perch, Bluegill, Crappie, and Walleye.

【ANTI-CORROSION STAINLESS STEEL】- All fishing equipment is made of stainless steel, which is not easy to deform and has strong corrosion resistance in the sea, and also features a super strong strength, which will help you breezily catch more fish without worrying lose them! It's a great gift for your kids, husband, dad, or brother who loves fishing! Especially for Father's Day, Thanksgiving Day, Christmas, Valentine's Day, etc.

【WIDELY USAGE FISHING SET】- Abundant accessories in the tackle box, to put together a variety of fishing rigs you want, such as Split Shot Rig, Jig Head Rig, Texas Rig, Carolina rig, Float Rig, Three Way Rig, etc. Which work great for both saltwater and freshwater, perfect for all water layers! Meet all you need for different fish you catch, such as Bass, Trout, Bluegill, Crappie, etc. This complete assortment of fishing accessories kit is suitable for any angler in any season in any water!

VARIOUS FISHING ACCESSORIES- TOPFORT 343 pcs fishing tackles set collects nearly all accessories including treble hooks, off-set hooks, drop shot hooks,nail weight,Jig Head Hook Bullet Fishing Weight, drop shot weights, jig heads,Sequins, barrel swivels, fastlock snaps, fishing beads,Three way cross-line barrel swivels,Heart Shaped Plastic Sheet, suitable for all sorts of fishing conditions (About 0.09USD for each piece)

Anti-Corrosion Stainless Steel- All Fishing Accessories made of stainless steel, which is not easy to deform and has strong corrosion resistance in the sea, and also features a super strong strength, which will help you breezily catch more fish without worrying lose them!

High quality fishhook- 5g/7g jig head hooks and different sizes of off-set hooks including 1/0# 2/0# 3/0# 2# 1#and 5g/7g/10g sinker weight combination suitable for all sorts of fishing!

Premium Home Improvement: This pocket-hole jig is a portable carpentry tool that makes strong joints

Pocket-Hole Jig: Set spacing between drill guides by removing or adding spacer or separating guides

Versatile Carpenter Tools: The included clamp adaptor helps the drill guide work with most clamps

Includes: (1) 24” universal t-track bars

Features: t-tracks are equipped with a double-cut profile for hardware versatility and pre-drilled mounting holes for easy installation

Premium quality: constructed out of extruded anodized 6463 aluminum, delivering a lightweight design that possesses an impressive strength to weight ratio, along with corrosion resistance and superior resilience

INCLUDES: (2) Hold Down Clamps for T-tracks/T-slots; (2) 5/16-Inch-18 thread 3-1/2-Inch long T bolts; (2) Washers; (2) 5/16-Inch-18 thread 5-star knobs

FUNCTION: Provides exceptional clamping action for your universal t-track system configurations and assemblies

FEATURES: Ergonomically designed 5 star knobs, non-marring clamping pads, and a high tension clamping capacity

Easy Open and Close – The KastKing MadBite Lure Wraps easily cover lures and hooks of most sizes to keep them safe and organized. Easy open and close hook and loop construction allows easy access to your gear to get you fishing quickly. Great way to protect and store your rods in lockers or on your boat to eliminate tangles.

Available In Two Popular Sizes for Most Lures – KastKing MadBite Lure Wraps come packed 4 lure wraps per package and are available in two sizes. The large PVC window size is 7.48” x 3.89” and the small PVC window size is 5.67” x 3.38” when folded and attached to your rod.

Puncture Resistant Clear PVC – Extremely clear, 3mm PVC window allows you to see what lure is attached to your rod for quick rod selection. Puncture resistant material protects your hooks and keeps them from tangling with other gear or from getting hooked in carpeting, clothing, ropes or skin.

INCLUDES: (2) Mini Hold Down Clamps for T-tracks/T-slots; (2) 5/16-Inch-18 thread 3-1/2-Inch long T bolts; (2) Washers; (2) 5/16-Inch-18 thread 5-star knobs

FUNCTION: Provides exceptional clamping action for your universal t-track system configurations and assemblies

FEATURES: Ergonomically designed 5 star knobs, non-marring clamping pads, and a high tension clamping capacity

🥇T-TRACK for JIG SAW - Predrilled Screws Holes for your convenient and easy installation process

🥇T-TRACK Anodized Aluminum fits: 5/16-inch and 1/4-inch t-bolts, and 1/4-inch hex-bolts.

🥇PERFECT use for hold-down Clamps measuring either 5-1/2 x 1-1/8-inch or 3-1/2 x 3/4-inch.

Includes Template 4211 For Half-Blind, Rabbeted Half-Blind And Sliding Dovetails

Includes Template 4213 For Through Dovetails And Box Joints

Includes Template 4215 For Miniature Through And Half-Blind Dovetails, And Miniature Box Joints

DIMENSIONS: Each track size is 24" length x 3/4" width x 3/8" depth.

QTY: Each set contains 2 pcs track bar and 12 pcs #6x 5/8” flat head screws

MATERIAL: Constructed of high strength aluminum alloy 6063 for durability and wear resistance.

INCLUDES: (4) 5-Star Knobs, (4) T-Knobs and (8) 5/16”-18 T-Bolts (1", 1-1/2", 2-1/2" & 3-1/2 in length)

FUNCTION: Helps secure, clamp down and optimize numerous t-track, fences, routing jig and fixture assemblies – accepts any application that utilizes a 5/16”-18 internal thread (also accepts most ¾ inch wide by 3/8 inch deep T-tracks); Will not work with ¼” t-track

FEATURES: Premium black knobs constructed out of a robust and heat resistant Polypropylene plastic, paired with an ergonomic design for smooth handling and comfort, plus molded plated steel inserts that are corrosion and rust resistant and designed for anti-stripping

SAW-HORSE SOLUTION - made of heavy duty steel construction, The centipede is a foldable work stand that can be set up as a large portable workbench at any job site

COMEPLETE KIT - The full set comes with the following accessories: 4 quick Clamps to keep your materials firmly in place, 4 X-shaped brackets which hold standard 2x4 boards steady, and a sturdy carry bag

WORK HEIGHT - the working height is 30 inches tall: Large enough to lay a 4ft x 8ft wood board on top. It’s expandable by simply adding risers (not included) for an increased working height. It supports up to 6, 000 pounds of power tools and machinery

Premium Kreg Pocket-Hole Plugs: Finish projects by covering exposed pocket holes with oak wood plugs

Accessible Woodworking Accessories: Install the wood plug by easily gluing it into pocket holes

Sturdy Pocket-Hole Plugs: These wood plugs for screw holes can be trimmed, sanded, and stained for a great finish