Best Marinco Power Products in 2026

Constructed of solid weatherproof materials, UL listed, CSA listed, NEMA 3R and NEMA 4 rated for wet locations

CLS Series inline connectors have a non-conductive retaining screw which passes through the metal contact and fastens at both ends to the retaining ring, providing maximum resistance to excessive torque loading

All CLS products mate precisely with all other manufacturers' cam products

Cls panel mount devices are constructed of a tough polycarbonate core and over molded with a uv resistant santoprene. The threaded inserts act as a lock nut to resist loosening during vibration

Uv resistant santoprene

400A 600volt

Cls panel mount devices are constructed of a tough polycarbonate core and over molded with a uv resistant santoprene. The threaded inserts act as a lock nut to resist loosening during vibration

Uv resistant santoprene

400A 600volt

Constructed of solid weatherproof materials, UL listed, CSA listed, NEMA 3R and NEMA 4 rated for wet locations

CLS Series inline connectors have a non-conductive retaining screw which passes through the metal contact and fastens at both ends to the retaining ring, providing maximum resistance to excessive torque loading

All CLS products mate precisely with all other manufacturers' cam products

Nylon- tough and resistant to a wide range of chemicals

Perma-lock terminals provide superior holding

10 solid brass for excellent conductivity

SHARKBITE BRASS CRIMP ELBOW: This SharkBite brass crimp elbow coupling is a full-flow fitting that is used to make a 90-degree connection between two pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp elbows work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These 90-degree elbow connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

SHARKBITE BRASS CRIMP TEE: This SharkBite brass crimp tee coupling is a full-flow fitting that is used to make a connection between two PEX pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp tees work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These crimp tee connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

Female thread and male thread with 90 degree for connecting pipe; hard connect way so it does not need sealing for most situation;

Meet NPTF requirement of US, better than NPT thread, could be used as NPT thread, too;

Good raw material brass, high corrosion resistance, low magnetic characteristics and high temperature ductility;

BRASS TEE: Tee Fitting features innovative push-to-connect design makes for quick and easy installation when joining same-size pipe; ideal for use in tight spaces

VERSATILE: Tee coupling is compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground) **Requires a stiffener when conencting to PEX pipe (Sold separately)

EASY TO INSTALL: SharkBite plumbing fittings do not require any soldering, glue, or crimping for installation; can be installed in wet lines

REDUCER PIPE CONNECTOR: Brass pipe connectors are perfect for making easy connections between same-size pipe; ideal for use in tight spaces **Large diameter fittings (1-1/4 to 2 inches) require a Stiffener (sold separately) when connecting to PEX pipe**

VERSATILE: SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground)

EASY TO INSTALL: Straight coupling can be easily installed without the need for soldering, glue, or additional tools; can be installed in wet lines

INSTALLS IN SECONDS: Repair with no special tools, soldering, crimping, or glue; Just push to create a quick watertight union with SharkBite pushfit connectors

VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination

LEAD-FREE: Made of high-quality forged DZR brass that is lead-free. Ball valves, shutoffs, and compression fittings, are safe for potable water lines

SHARKBITE COPPER CRIMP RING: This SharkBite crimp ring crimp brass or poly PEX crimp fittings onto PEX or PE-RT pipe; available in 3/8 inch to 2 inch sizes

VERSATILE: This crimp ring works well with brass or poly PEX crimp fittings; crimp to create a watertight seal without soldering or glue required

DURABLE: Crimp rings are made from copper for stronger durability

SHARKBITE BRASS CRIMP ELBOW: This SharkBite brass crimp elbow coupling is a full-flow fitting that is used to make a 90-degree connection between two pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp elbows work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These 90-degree elbow connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

SHARKBITE BRASS PUSH CAP: This push-to-connect fitting allows you to plug the end of a pipe quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Pushfit end caps work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite Plug End Caps allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

SHARKBITE BRASS PUSH CAP: This push-to-connect fitting allows you to plug the end of a pipe quickly and easily; ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**

VERSATILE: Pushfit end caps work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite Plug End Caps allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

SHARKBITE BRASS PUSH FEMALE ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an MNPT thread quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Pushfit female connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push female adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

Adapts 1/4" NPT male end to 1/4" tube size female end at a 90-degree angle

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

For use with LP and natural gas, refrigeration, and hydraulic applications

PIPE CONNECTOR: Brass pipe connectors are perfect for making easy connections between same-size pipe; ideal for use in tight spaces **Large diameter fittings (1-1/4 to 2 inches) require a Stiffener (sold separately) when connecting to PEX pipe**

VERSATILE: SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground)

EASY TO INSTALL: Straight coupling can be easily installed without the need for soldering, glue, or additional tools; can be installed in wet lines

SHARKBITE BRASS CRIMP TEE: This SharkBite brass crimp tee coupling is a full-flow fitting that is used to make a connection between two PEX pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp tees work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These crimp tee connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

SHARKBITE BRASS CRIMP ELBOW: This SharkBite brass crimp elbow coupling is a full-flow fitting that is used to make a 90-degree connection between two pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp elbows work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These 90-degree elbow connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

REDUCER PIPE CONNECTOR: Brass pipe connectors are perfect for making easy connections between same-size pipe; ideal for use in tight spaces **Large diameter fittings (1-1/4 to 2 inches) require a Stiffener (sold separately) when connecting to PEX pipe**

VERSATILE: SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground)

EASY TO INSTALL: Straight coupling can be easily installed without the need for soldering, glue, or additional tools; can be installed in wet lines

PIPE CONNECTOR: Brass pipe connectors are perfect for making easy connections between same-size pipe; ideal for use in tight spaces **Large diameter fittings (1-1/4 to 2 inches) require a Stiffener (sold separately) when connecting to PEX pipe**

VERSATILE: SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground)

EASY TO INSTALL: Straight coupling can be easily installed without the need for soldering, glue, or additional tools; can be installed in wet lines

SHARKBITE COPPER CRIMP RING: This SharkBite crimp ring crimp brass or poly PEX crimp fittings onto PEX or PE-RT pipe; available in 3/8 inch to 2 inch sizes

VERSATILE: This crimp ring works well with brass or poly PEX crimp fittings; crimp to create a watertight seal without soldering or glue required

DURABLE: Crimp rings are made from copper for stronger durability

SHARKBITE BRASS PUSH WASHING MACHINE VALVE: The SharkBite washing machine straight valve can be used in washing machine installations with no washing machine outlet box; ideal for working in tight spaces

VERSATILE: This plumbing valve can be mounted to a stud or joist, and features a 1/2-inch push-to-connect inlet that works well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; features a quarter-turn angle water valve with mounting brackets

EASY TO INSTALL: The innovative design of the SharkBite brass push washing machine valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines; remove using a disconnect clip or disconnect tongs

SHARKBITE BRASS CRIMP ELBOW: This SharkBite brass crimp elbow coupling is a full-flow fitting that is used to make a 90-degree connection between two pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp elbows work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These 90-degree elbow connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

INSTALLS IN SECONDS: 90 degree elbow pipe connectors requires no soldering, crimping, or glue, just push to create a watertight seal; can be installed in wet lines

VERSATILE: Elbow connector fits PEX, copper, CPVC, PE-RT, and HDPE pipe in any combination

LEAD FREE: 90 degree elbows are made of durable high quality forged DZR brass which is lead free

SHARKBITE BRASS CRIMP TEE: This SharkBite brass crimp tee coupling is a full-flow fitting that is used to make a connection between two PEX pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp tees work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These crimp tee connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

Adapts 1/8" NPT male end to 1/8" tube size female end at a 90-degree angle

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

For use with LP and natural gas, refrigeration, and hydraulic applications

【Package Includes】: Pex Fittings Set includes 25pcs 1/2" PEX Elbows

【Non-Pollution】: Lead free brass pex fittings, comply with drinking water standard. ASTM F1807 NSF/ANSI 61 Certified

【Extra-Long Service Life】: High-quality brass pex 90 degree elbow set resists corrosion, rust and high temperature (32℉—200℉).

REDUCER PIPE CONNECTOR: Brass pipe connectors are perfect for making easy connections between same-size pipe; ideal for use in tight spaces **Large diameter fittings (1-1/4 to 2 inches) require a Stiffener (sold separately) when connecting to PEX pipe**

VERSATILE: SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground)

EASY TO INSTALL: Straight coupling can be easily installed without the need for soldering, glue, or additional tools; can be installed in wet lines