Best Masalong in 2026

Full length of 18CM (7inch)

Blade length 8CM (3.1inch)

Handle length 11CM (4.3inch)

Full length of 18CM (7inch)

Blade length 8CM (3.1inch)

Handle length 7.8CM (3.1inch)

Full length of 18CM (7inch)

Blade length 8CM (3.1inch)

Handle length 11CM (4.3inch)

Including the full length of the sleeve is: 20cm (7.9inch

The full length of the hair is: 18.5cm (7.3inch)

edge length is: 9cm (3.5inch)

Including the full length of the sleeve is: 20cm (7.9inch

The full length of the hair is: 18.5cm (7.3inch)

edge length is: 9cm (3.5inch)

Full length of 18CM (7inch)

Blade length 6.5CM (2.5inch)

Blade material :D2 Steel / Hardness :58-60HRC

Full length: 19.4CM, Blade length: 8.1CM

Handle material: G10

Hardness: 58HRC ,Steel: d2 steel

Combination of the two major characteristics of bionic and Transformers

The Damascus blade / 5cr15 steel is very sharp. When you open it, you must first observe and figure out the blade's exit, so as to protect your hands.

When you select a product, click on the product attributes to have a holster version of the folding knife, and if there is no knife without a holster in the main picture, it means that the holster will not be delivered. Please choose the product according to your liking, thank you

Overall length: 22cm(8.66inch)

Blade length: 9.5cm(3.74inch)

Blade steel: D2

This knife is a full Tang knife, the blade thickness is 3cm. The tip and the knife ring are made of 9cr17mov such super hard steel, and rust-proof. You don't have to worry about how to save. The surface of the handle is made of G10 material, which is strong, wear-resistant, anti-corrosion, and feels good.

When you don’t need to use it as an EDC tactical knife, you can also use it as a home knife. No matter what you want to cut, you can use the back groove on the back of the knife to increase the pressure when you press your thumb.

The weight of a single pole is only 125G, and the diameter is 17.7cm. When you are familiar with Karambit, you will know that the ratio of the size to the weight of a Karamibt is very important, close to the golden section line.

Expand the length of the full length: 16CM

The sharp part of the blade: 5.5CM , the blade: 7.5CM

Blade material: D2 steel

Overall length: 20cm(7.87inch)

Blade length: 8.5cm(3.35inch)

Blade steel: 7CR17 ，HRC:59-60

Full length of 18CM (7inch)

Blade length 8CM (3.1inch)

Handle length 11CM (4.3inch)

Buy real knives and training claws together at a super discount.

5CR steel karambit With leather sheath (5CR sand Stone wash black handle)+training claws(No blade training karambit -black)

(No blade training karambit -black) is very light, only 57G. In order to protect the human body from injury during pair training, we use all plastic. It is different in nature from the informal Karambit knife. It has a size of 1:1, not a weight of 1:1.

Blade steel: 8CR14MOV (High carbon stainless steel),Sharp point length of knife: 2.3inch (5.8cm)

Blade handle material: G10 ，G10 surface carved with anti-skid lines

Full length of knife: 6.5inch (16.7cm),Handle length: 4.3inch (11cm)

Blade steel: 8CR14MOV (High carbon stainless steel),Sharp point length of knife: 2.3inch (5.8cm)

Blade handle material: G10 ，G10 surface carved with anti-skid lines

Full length of knife: 6.5inch (16.7cm),Handle length: 4.3inch (11cm)

Buy real knives and training claws together at a super discount.

D2 steel karambit With leather sheath(Stone wash Version-kydex Sheath)+training claws(No blade training karambit -black)

(No blade training karambit -black) is very light, only 57G. In order to protect the human body from injury during pair training, we use all plastic. It is different in nature from the informal Karambit knife. It has a size of 1:1, not a weight of 1:1.

Professional high temperature vacuum heat treatment

Full length: 18.3cm

Hardness: 60HRC

Buy real knives and training claws together at a super discount.

5CR steel karambit With leather sheath (5CR Black Stone wash Black handle) +training claws(No blade training karambit -black)

(No blade training karambit -black) is very light, only 57G. In order to protect the human body from injury during pair training, we use all plastic. It is different in nature from the informal Karambit knife. It has a size of 1:1, not a weight of 1:1.

The blade material is made of Damascus VG10 steel, and the VG10 material made knife is sharp. The length of the blade is 3.77inch (9.6CM), and the length of the blade opening part is 3inch (7.8CM).

The main body of the handle is made of hard 3.0 steel. The handle surface is treated with molybdenum color, and the carbon fiber pasted with advanced materials can show more nobility. The washers and nails are made of titanium. Pocket clip: aluminum.

The blade is 0.28cm thick, and the handle is 1.1cm thick. It is a portable knife and can be used as an EDC

Buy real knives and training claws together at a super discount.

5CR steel karambit With leather sheath (5CR Black Stone wash Green handle)+training claws(No blade training karambit -black)

(No blade training karambit -black) is very light, only 57G. In order to protect the human body from injury during pair training, we use all plastic. It is different in nature from the informal Karambit knife. It has a size of 1:1, not a weight of 1:1.

Full length: 23.3 CM (9.17inch);Blade length: 11.3 CM(4.4inch);Handle length: 11 CM (4.3inch)

Steel: D2 Steel (the advantage is very hard steel, the disadvantage is that it requires dry maintenance or anti-rust oil)

Hardness: 60--61HRC (vacuum oil cooling heat treatment)

Total length: 21.2cm, Handle length: 12cm.Blade length: 85cm

Blade material: 8cr13mov

Handle material: Black G10

Buy real knives and training claws together at a super discount.

D2 steel karambit With leather sheath (Sand Light-kydex Sheath) +training claws(No blade training karambit -black)

(No blade training karambit -black) is very light, only 57G. In order to protect the human body from injury during pair training, we use all plastic. It is different in nature from the informal Karambit knife. It has a size of 1:1, not a weight of 1:1.

Overall Length: 7.09"

Blade Length: 2.76"

Knife Weight: 3.95 oz

The full length of the knife: 29 CM (11.4 inch),The length of the knife handle: 12 CM ,Blade length of the knife: 15 CM

Blade material: 7cr17 (good rust resistance, relatively hard)

Hardness: 58-59 HRC

Full length: 23.6cm

Blade length: 10.4cm

Surface: fine sanding effect, CNC flat grinding, super three-dimensional effect, simple and generous edge line!

Full length: 22cm (8.6inch),Blade length: 10.6cm (4.1inch) ,Handle length: 11.7cm (4.6inch)

Surface: CNC grinding, super cubic sense edge line, fine sanding Sharpening method: secondary sharpening,

Blade material: D2 ,Hardness: 61-62HRC

Buy real knives and training claws together at a super discount.

D2 Steel Masalong Unicorn Claw karambit knife (Unicorn blue)+training claws(No blade training karambit -black)

(No blade training karambit -black) is very light, only 57G. In order to protect the human body from injury during pair training, we use all plastic. It is different in nature from the informal Karambit knife. It has a size of 1:1, not a weight of 1:1.

A CUT ABOVE THE REST: Compact, agile and ready to face any adventure head-on. Our range of Swiss Army Knives have been established since 1897 and continue to be an icon of utility and smart design.

DURABLE CONSTRUCTION: Swiss made stainless steel construction encased in our popular scales offers a slimmer profile and is extremely resistant.

COMPACT CARRY: Bring this knife with you on your daily adventures without sacrificing space. It makes a great gift for any occasion or stocking stuffer for Christmas.