Best Memphis in 2026

Ultra-light treated paper cone high SPL speaker

Cloth treated surround for high SPL

Accordion design for increased excursion and output

Subwoofer Size: 12" | 2” black anodized aluminum vented voice coil former | High-temp TIL voice coil former

Lightweight cone for increased efficiency | Improved suspension & coil design for PR-V2 models | Tough rubber top gasket

High-strength wide roll surround | Single Voice Coil

Size (in): 6 x 9

RMS / Peak (w): 60 / 120

Magnet Weight (oz): 13

Satin-M chrome metal ends

Frosted translucent jacket

Hyper twist design for the best possible noise rejection

Power Handling: 1200 Watts Max | 600 Watts RMS | Double stitched surround | Side and rear vented basket and motor | 60 oz magnets

2" TIL voice coil former | Reinforced spider shoulder | Woven tinsel leads | Pair of subwoofers in parallel to a single 2 ohm load at the terminal

Enclosure Specifications: 3/4" MDF Construction | Custom designed and tuned by Memphis | Loaded with a pair of PRX-12S4 Power Reference series subs | Wrapped in custom stitched carpet

4-channel car amplifier | 50 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms) | 150 watts RMS x 2 bridged at 4 ohms (4-ohm stable when bridged)

Variable low-pass filters (30-250 Hz, 12 dB/octave) | Variable high-pass filters (50-1000 Hz, 12 dB/octave)

Selectable bass boosts (0, 6, 12 dB at 45 Hz) | Preamp and speaker-level inputs

20" powered sound bar designed for ATV, golf cart, and marine use | Built-in Bluetooth connectivity

Built-in amplifier (200 watts RMS, 400 watts peak) | Four (4) 3" speakers, two (2) 1" tweeters | Two side-firing passive radiators for enhanced mid-bass

Front panel controls | Waterproof wiring harness

17-2FCAPM - Memphis 2 Farad 20V Surge Capacitor with Ultra Low ERS

2 Farad 20V Surge Capacitor with Ultra Low ERS

Delivers Consistent Current to Reduce Headlight Dimming

Graphite reinforced polypropylene cone

Polyurethane surround

Swivel mount PEI dome tweeter

Dimensions: 6.6 x 6.6 x 2.4 inches

Impedance: 4 ohms

Mounting Depth: 2.1 inches, Mounting Hole: 5.5 inches

genuine oem factory part

exact fit

durable

8" 2-Way Coaxial Full Range Marine Grade Speakers, Pair (Black)

Peak Power: 500 Watts (Pair) | RMS Power: 250 Watts (Pair)

Premium Microfiber Composite Mineral Filled Mid-Woofer Cone with Butyl Surround

8" 2-Way Coaxial Full Range Marine Grade Speakers, Pair

Peak Power: 500 Watts (Pair) | RMS Power: 250 Watts (Pair)

Premium Microfiber Composite Mineral Filled Mid-Woofer Cone with Butyl Surround

Polyethylene-Naphthalate domed tweeters

A-Series 6x9 Shallow 4-Way 450 Watts Max Power Black Car Audio Speakers (Pair)

Size: 6x9"

Impedance: 4 Ohms

Peak Power Handling: 360W

High performance audio upgrade that delivers signature quality sound that goes beyond OEM factory systems

Marine certified with IP55 rating (water- and dirt-resistant) and tested for salt-fog, UV and humidity

Polypropylene and UV tolerant cone with waterproof inner and outer surrounds

Patented Plus One Polypropylene Woofers - Polypropylene cones with up to 35% more radiating cone area than other cones in the same class provide higher sensitivity, increased low frequency output and better tonal balance.

Edge-Driven Tweeters - Edge-driven tweeters deliver wider dispersion and smoother high frequency response with increased power handling for high- and mid-frequencies.

True 4 Ohm Architecture - True 4 ohm architecture with low impedance voice coils give the amplifier room to deliver peak power providing stronger and clearer sound with better depth and detail.

MIDRANGE THAT HANDLES IT ALL - A mid-range driver that can answer the call to handle the most significant part of the audible sound spectrum. A speaker that sounds great with just instrumentals and, even better with vocals.

POWER YOU CAN COUNT ON - The PRO-X6.4BMSL delivers an impressive 500W Max Power with 250W RMS at 4 Ohms, enough to tackle a full range of audio.

HIGH-QUALITY VOICE COIL - 1.5” high-temperature CCAW voice coil can handle extreme heat and maintain its structural integrity meaning long life out of your speakers.

Sold as a package - includes X2 Skar Audio FSX65-4 6. 5" 4 ohm mid-range speakers

300 watts Max (Each) | 150 watts RMS (each)

21 oz ferrite motor | Sensitivity: 92.5 dB 1W/1M

Edge-driven textile tweeters for smooth, clear highs

Oversized Plus One woofers offer more surface area for higher bass output and enhanced midrange performance

Newly engineered baskets are optimized to fit most factory speaker locations

Elite TX Series 3.5" Coaxial Speaker System - Includes 2 Speakers

Peak Power - 120 Watts (Pair) | RMS Power - 60 Watts (Pair)

Featuring a 0.8" High Performance Silk Dome Tweeter | 4 Ohm Impedance

6 x 9-inch three-way loudspeaker pair.

Plus One woofer cone with rubber surround

Adjustable mylar-titanium tweeter and supertweeter with level control

Elite TX Series 6.5" Coaxial Speaker System - Includes 2 Speakers

Peak Power - 200 Watts (Pair) | RMS Power - 100 Watts (Pair)

Featuring a 1" High Performance Silk Dome Tweeter | 4 Ohm Impedance

Skar Audio FSX65-4 6.5" 4 Ohm mid-range speaker

300 Watts Max | 150 Watts RMS

1.5" Voice coil - Ferrite magnet

200 Watts Max Each, 50 Watts RMS Each

Rigid polypropylene cone material

Polyester foam speaker surround

MIDRANGE THAT HANDLES IT ALL - A mid-range driver that can answer the call to handle the most significant part of the audible sound spectrum. A speaker that sounds great with just instrumentals and, even better with vocals.

POWER YOU CAN COUNT ON - The PRO-X10M delivers an impressive 600W Max Power with 300W RMS at 8 Ohms, enough to tackle a full range of audio.

HIGH-QUALITY VOICE COIL - 2” high-temperature CCAW voice coil can handle extreme heat and maintain its structural integrity meaning long life out of your speakers.

Peak Power: 200 Watts (Pair), RMS Power: 60 Watts (Pair)

Speaker Impedance: 4 Ohms | 1" KSV Voice Coil

Microfiber Paper Mid-Woofer Cone & Butyl Rubber Surround

The CS-Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure with EVC (Extended Voice Coil) for even deeper lows.

By drastically reducing the mounting depth, CS-Series Coaxial and Three-Way Speakers will fit in nearly every make and model of vehicle on the road today.

The perfect upgrade from your factory sound, a stamped-steel framework supports a rigid polypropylene cone and zero-protrusion PEI tweeters.

The Punch P1694 is an impressive 4-way full-range speaker designed for fanatics who need a high quality factory replacement in an easy to install package

The P1694 6”x9” 4-Ohm black speakers come as a pair, have a power handling of 75 Watts RMS/150 Watts Max and include grilles, mounting hardware and OEM adapter plate

Featuring a PEI dome tweeter with built-in crossover and injection molded mineral filled polypropylene cone with butyl rubber surround that provides high output and accurate frequency reproduction