Best Nacx in 2026

Product Name: Copper Washer; Inner Diameter: 12mm/0.47"

Outer Diameter: 18mm/0.7"; Thickness: 1.5mm/0.05"

High quality copper washers are constructed to uphold strength and ultimate durability during tough operations.

Air manifold for distributing pneumatic power to multiple locations from a single source.

Two G1/2" inlet ports and seven G1/4" outlet ports.

High pressure resistance and strong sealing.

Air manifold for distributing pneumatic power to multiple locations from a single source.

Two G1/2" inlet ports and six G1/4" outlet ports.

High pressure resistance and strong sealing.

[Stainless Steel Material]-- The air vent is made of stainless steel, durable, and strong ability to withstand gravity, not only oxidation resistance, but also more beautiful installation effect.

[Round Mesh Design]-- Air Vent hole with honeycomb design, exquisite round holes conform to the breathable design, small round holes can be dust-proof and not easy to block.

[Odor-Free Environment]-- Circular mesh can make the wind easily flow into the spaces where you are staying, it will giving you a fresh and odorless life and work environment.

Tungsten carbide-tipped cutting edges last longer and can be run at higher rates and speeds, cutting diameter is 32mm(1-1/4"), effective depth is 25mm(1”).

Well made of high speed steel, with extremely sharp blade, low consumption and durable, provided impact resistance, wear resistance.

Edge coated with diamond to enhance the drilling speed and creates a sharp, high precision and smooth cut without broken.

[Material] This matte black air vent is made of stainless steel, durable, and strong ability to withstand gravity, not only oxidation resistance, but also more beautiful installation effect.

[Design] Air Vent hole with honeycomb design, exquisite round holes conform to the breathable design, small round holes can be dust-proof and not easy to block.

[Environment] Circular mesh can make the wind easily flow into the spaces where you are staying, it will giving you a fresh and odorless life and work environment.

Size: shank diameter: 1/4", cutting diameter: 1/4"

The double chip evacuation design increases fast chip clearance, which is required for high feed rates.

Cuts composition materials, plywood, hardwood and softwood.

Product Name: Push To Connect Quick Fitting; Model: PC4-01; Tube And Thread Size: 4mm(5/32”) Outer Diameter X 1/8" G Thread

Operating Pressure: 0-0.9MPa; Max Working Pressure: 1.32MPa; Working Temperature: 0 - 60 Degrees Celsius

Type: One end is a push to connect tube connector, the other end is a male G thread, and a good release cap that can withstand greater and stronger pressure without tripping.

Product Name: ball plunger; Package Content: 20pcs of ball plunger

Body Diameter: 3mm/0.118”; Body Length: 4mm/0.157”; Material: 304 stainless steel

Easy to Use: easy to install and convenient to use, just press it in for fastening.

Product Name: ball plunger; Package Content: 10pcs of ball plunger

Body Diameter: 8mm/0.314”; Body Length: 9mm/0.354”; Material: 304 stainless steel

Easy to Use: easy to install and convenient to use, just press it in for fastening.

Made of high-quality nickel-plated steel, which is rust resistant, strong and durable. Silver surface, polished handle, with an even rough texture in 3 turning pieces, looks very delicate and can be rotated easily, suitable for a variety of DIY craft project.

Compact and suitable for electronic assembly, tools, model making, home decor and hobbies. Multi-purpose hand drill suitable for drilling wood, grape fruit, bone, melasma, olive pits, walnuts and plastics.

The mini hand drill is a moderate size, so you can easily hold it. The operation is very simple. Simply unscrew half of the vice head, insert the drill, then tighten the head, align it, and secure the top of the handle as you turn it

[Material] This ceramics white air vent is made of stainless steel, durable, and strong ability to withstand gravity, not only oxidation resistance, but also more beautiful installation effect.

[Design] Air Vent hole with honeycomb design, exquisite round holes conform to the breathable design, small round holes can be dust-proof and not easy to block.

[Environment] Circular mesh can make the wind easily flow into the spaces where you are staying, it will giving you a fresh and odorless life and work environment.

Size: M25 x 1.5mm, Inner Diameter: 25mm/ 0.98'', Thread pitch: 1.5mm/0.06''.

Made of 304 stainless steel, corrosion-resistant and durable.

Convenient installation and disassembly, simple operation and good applicability.

Size: M18 x 1.5mm, Inner Diameter: 18mm/ 0.7'', Thread pitch: 1.5mm/0.06''

Made of 304 stainless steel, corrosion-resistant and durable.

Convenient installation and disassembly, simple operation and good applicability.

Constructed of steel with T-handle for added leverage. Suitable for drilling, expanding holes, bridge pins, end pins.

This high-quality reamer creates holes of precise size up to 16mm diameter on metal, wood or plastic.

The hole reamer is made of hardened steel, enlarging holes with its ground steel cutting edges.

Diameter: 5mm/ 0.19'', Width: 8mm/ 0.31'', Thickness: 3mm/ 0.11''.

The product is smooth without burr, with high quality workmanship and durable fastening.

The thread is neat and clear, uniform stress, not easy to slide.

PH2/SL5, 1/4-inch Hex Shank, 2.5Inches Length.

Made of S2 alloy steel, heat treated, Impact resistance, high torque and low stress.

The screwdriver head is equipped with strong magnet, which can easily hold the screws.

Double-Rod Air Cylinder.

Bore: 20mm; Stoke: 25mm.

Max Pressure : 1.5 MPa(215Psi); Working temperature : -68~158℉.

Quality Type 18-8 Stainless Steel Neoprene Bonded Sealing Washers

The Bonded Seal was originally designed to replace copper type washers in high-pressure systems

The Bonded Seal comprises a metal washer and an elastomeric ring bonded inside the diameter. The metal washer prevents over-compression and limits deformation of the elastomeric ring.

Reliable low and high pressure sealing, High and low temperature capabilities

1. Quantity: 20pcs/set (1 sizes: M12)

2. Material: Copper, high conductivity, corrosion resistant

3.High conductivity, corrosion resistant copper washer assortment, Replacement for sump plugs, water, fuel and hydraulic fittings

Package of 100 pieces

EPDM rubber (Neoprene) is an extremely durable synthetic rubber membrane

Inside Diameter .25" | Outside Diameter 5/8" | Thickness .145"

Product Name: Copper Washer; Inner Diameter: 12mm/0.47"

Outer Diameter: 18mm/0.7"; Thickness: 1.5mm/0.05"

High quality copper washers are constructed to uphold strength and ultimate durability during tough operations.

Material: 100% copper, high conductivity, corrosion resistant copper washer assortment

150PCS 15 Popular Sizes Sealing Washers Kit, great for sump plugs, water, fuel, and hydraulic fittings

150 pcs solid copper sump plug washer set. All contained in a compact and see through compartmented plastic case, convenience to use.

【✔】 High Quality Stainless Steel Neoprene EPDM Bonded Sealing Washers Assortment Set

【✔】 Made of 304 Stainless Steel Material, stainless steel has a high resistance to rust and corrosion and may be mildly magnetic

【✔】 Set Includes 6 Most Used Sizes, Works with #6, #8, #10, #12 Size Screws, 【Please See Picture 2 for Specific Dimensional Size】

♛『Excellent Quality』: These washers one side is 304 stainless steel, with high hardness, anti-corrosion and anti-rust; the other side is Neoprene EPDM, which has the abilities of aging resistance, high and low temperature resistance, acid and alkali resistance, ozone resistance and ultraviolet resistance, they are beautiful and practical.

♛『Perfect Combination』: 304 stainless steel combined with EPDM, enhance the fastening effect as well as the function of sealing, provide a lasting seal against air and water, used to prevent leakage, distribute pressure of the bolt or screw, can avoid heat expansion and cold contraction while installing.

♛『Waterproof Washers』: These washers have superior corrosion resistance compared to regular steel washers, perfect used for near salt water, fresh water, wet environments and other wood related projects.

High Quality:Bonded seal made of zinc plated metal + rubber,high pressure resistant,oil resistant,sturdy and durable for long using life.

Multi size:156pcs bonded seal set includes 10 different metric size, M6-12PCS, M8-12PCS, M10-12PCS, M12-20PCS, M14-20PCS, M16-20PCS, M18-20PCS, M20-20PCS, M22-10PCS, M24-10PCS.

Stylish Desigh:Bonded seal consists of a metal ring and a rubber gasket. The metal washer ensures that the components to be connected are reliably and securely held, rubber ring generally uses oil resistant NBR rubber.

Product Name: Copper Washer; Inner Diameter: 10mm/0.39" Outer Diameter: 14mm/0.55"; Thickness: 1.5mm/0.06"

Copper Provides a Tighter Seal and Greater Heat Endurance than Steel and Rubber Washers.

Max Operation temperature: 350C Max Operation pressure:16MPa Melting point: 1083C

Sufficient Quantity: the package comes with a total of 80 galvanized steel washers (screw not included), which measure approx. 1-1/4 inches in diameter, abundant quantity to satisfy your various use and replacement needs

Reliable Quality: made of quality steel with rust resistant galvanized exterior finish, our foam board washers are reliable and sturdy, not easy to deform or rust, which can serve you for a long time with confidence

Easy to Install: the middle of the 1-1/4 inch washers is designed with a groove for driving screws, and the backside of the washer is convex for inserting into the surface of the back plate, which plays a fixed role

Made by high qulaity stainless steel with nbr to ensure the good performance.

Kit includes: M6*10PCS,M8*10PCS,M10*10PCs,M12*20PCS,M14*20PCS,M16*20PCS,M18*20PCS,M20*20PCS,M22*10PCS,M24*10PCS

Have a stroage box easy to use.