Best Needenr in 2026

Packing Including 4 PCS Bolts,4pcs Springs, 4 Pcs Hex Nuts,and 4 Pcs Spring Washers

M10-1.25 Exhaust Bolt,Overall Lenth:67mm Thread Diameter 10 mm, Thread Pitch:1.25 mm .Screw length:19mm, please checking the size when order.

Material:Made by Mild Steel and Zinc coated

IMPACT RESISTANT PUSH RIVETS - Well made of durable Nylon plastic, not easy to break or crack like other brands, it is super sturdy!

TOUGH FASTENER REMOVER- Durable Plastic and Metal material that has advantage of high abrasion resistance,allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them.

APPLICATION: Widely used for door trim, fender, bumper, radiator shield yoke, side skirt, grille, engine cover and splash shield retainers.Better than other clips

Product 1: Constructed from durable and robust material for long life

Product 1: Helps to ensure a tight and leak-free connection

Product 1: New Walker accessories help to ensure effective exhaust repairs

KEEPS EXHAUST PARTS IN PLACE -- Designed to support undercar exhaust components

CONSISTENT PERFORMANCE -- Spring designed with the right compression strength for a secure connection

PREMIUM MATERIALS -- Made from high-quality materials for durability and long life

Meets Or Exceeds OEM Specs

Factory OEM Fit Form And Function

Specifically designed to work with Performer, Performer RPM and Torker Series

Have cadmium finish steel bolt and hardened washer kits

Contains all bolts and washers needed for manifold installation

KEEPS EXHAUST PARTS IN PLACE -- Designed to support undercar exhaust components

CONSISTENT PERFORMANCE -- Spring designed with the right compression strength for a secure connection

PREMIUM MATERIALS -- Made from high-quality materials for durability and long life

KEEPS EXHAUST PARTS IN PLACE -- Designed to support undercar exhaust components

CONSISTENT PERFORMANCE -- Spring designed with the right compression strength for a secure connection

PREMIUM MATERIALS -- Made from high-quality materials for durability and long life

Fit Type: Vehicle Specific

Package Dimensions: 9 L x 4 H x 7 W (inches)

Package Weight : 0.05 pounds

Fit 4.6 or 5.4 liter Ford engine

Package Contents: 8 Coil Pack Screws/Bolts kit

【Fitment】Compatible with Lexus ES350 13-18 / Lexus IS350 06-18/ Lexus RX350 07-18, Scion xA 04-06/ Scion xD 08-14, Toyota Celica 90-93/ Toyota Echo 00-05/ Toyota Tundra00-06

【Size】Fits hole diameter 6mm / 0.24inches, stem length 18mm / 0.7inches, top head diameter 10mm / 0.4inches, bottom head diameter 16mm / 0.6inches

【Feature】Made of high-quality black metal material, tapper screw for bumper engine shield splash, match the original screws and make a tight fit so these shields stay put at high speeds

KEEPS EXHAUST PARTS IN PLACE -- Designed to support undercar exhaust components

CONSISTENT PERFORMANCE -- Spring designed with the right compression strength for a secure connection

PREMIUM MATERIALS -- Made from high-quality materials for durability and long life

Material --- High Quality Steel having excellent toughness,Excellent workmanship are necessary conditions for product reliability, stability and long-term use, We check the products again before shipping for you

Chemical Resistance --- Wide variety of chemicals resistance, Gasoline, Engine Oil, Anti-freeze fluid, Windshield Washer Fluid, Lubrication Oil etc.Heat Resistant Suitable for high-temperature applications, Eco-friendly, Non-Pollution in Treatment Process

Function --- Used for Fender liner, bumper cover, air duct, splash shield, plastic trim, etc.

PLEASE NOTE: This item is not a replacement ignition or door lock cylinder. It is a replacement lock cylinder for BOLT branded toolbox latch kits. This cylinder works ONLY with the BOLT latch kits featuring BOLT technology

Works with your vehicle’s ignition key please verify fitment by looking up the year, make and model of your vehicle

Automotive grade quality lock cylinder

【Fitment】Compatible with 03-08 Infiniti G35 Sedan, 03-07 Infiniti G35 Coupe, 08-14 Infiniti G37 & G37X, 03-08 Infiniti FX35 & FX45, 08-12 Infiniti EX35, 03-09 Nissan 350Z, 09-14 Nissan 370Z

【Material】Made of high-quality nylon and black iron material, durable, anti-wear, and anti-corrosion, would not break easily during use, that is definitely cheaper than going to the auto parts store

【Package】Included 10pcs extruded U-nuts (replace/fix to the bumper), 15pcs body bolts with built-in fender washer, 10pcs nylon push clips, 1pc OTUAYAUTO pack box

Ideal replacement - the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type

Complete installation - this kit includes hardware required for securely attaching the manifold to the exhaust system

Trustworthy construction - the kit's bolt and spring are made of hardened steel for durable, long-lasting service life

Facilitates optimum sealing of gasket surfaces to prevent intake manifold leaks

Manufactured from chrome moly steel with a black oxide finish

Rated at 170,000 PSI, which is considerably stronger than Grade 8 hardware

Fitment: For High Performance 32mm to 40mm CNC Air Intake Manifold, for most 2-stroke engine 66cc/80ccc.

Package Include:1x Air Intake Manifold,2x M6*12 Bolt,2x spring shim.

Brand New & High Quality!

【Fitment】Fit for Polaris Vehicle as Following ▶ Frontier 2002-2005 ▶ Sportsman 600 2003-2005 ▶ Sportsman 700 2002-2006 ▶ Sportsman 800 2005-2006 ▶ SPORTSMAN MV7 2005

【Material & Feature】This exhaust spring kit is made of durable high quality material, which can repair the leak problem of exhaust system. With 100% tested, Perfect replace for original factory part.

【OEM#】5811511 3610047. Please check your bike OEM number before you make an order.

Subaru Bolt Spring and nut mount kit for your Subaru Cat Converter

Exhaust Spring 44044AA010 X2 Exhaust Bolt 44059AA010 X2 Exhaust Nut 802008270 x2

1998-2018 Forester 1993-2018 Impreza & WRX & STi 1990-2018 Legacy 2000-2018 Outback

ARP Intake Manifold Bolt Kit Small Block Ford P/N 154-2002

★Fitment - This Bolt Kit Fits All 265, 283, 302, 305, 307, 327, 350 , and for 400 Chevy Engines.

★Fitment - The carb stud kit fits Carter, Edelbrock, or Holley Carbs. The studs have an internal hex used to install them in your intake manifold.If you are using a Quadrajet carb, just let us know with your payment and we will include a mounting bolt kit for you.

★Feature - Give Your Small Block Chevy Engine a new look with our 205 Piece Stainless Steel Hex Bolt kit!! Our special intake washers are 1/8 thick. The bolts in this kit are made from 304 stainless steel.

Durable Material: High hardness steel for long service life, rust prevention, wear‑resistant, not easy to deform.

Durable Material: High hardness steel for long service life, rust prevention, wear‑resistant, not easy to deform.

Durable Material: High hardness steel for long service life, rust prevention, wear‑resistant, not easy to deform.

Compatible with 1958-2000 Chevy Big Block OEM and Aftermarket Intake Manifolds 348 366 402 409 427 396 454 502

These are High Grade 18-8 Stainless-Steel Steel 3/8-16x1” Bolts and Washers That will NOT rust or Corrode like the chrome or steel ones sold. These Use a 5/16” Allen Wrench/Socket

We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.

Professional, premium aftermarket replacement

Provides the performance and dependability you expect from ACDelco

Manufactured to meet expectations for fit, form, and function

Hard Top Torx Screws Bolts Function: for Jeep Wrangler 2007-2018 pillars, windshield frame, hinges, doors and roll bar.

Torx Screws Details: Color: Black, Material: Stainless Steel, Fit Type: Vehicle Specific, Head Style: Flat, Thread Size: M8, Attachment Type: Screw-On. Removable and Durable.

Hardtop Torx Screws Feature: Surface Finish: Black Oxide, Black Powder Coat: Resists Rust and Dirt, Stainless Steel Metal Construction: Strong Stability and Strength.

High quality Material: The exhaust spring bolt kit is common to all models, designed and made of strong and durable High quality metal materials, and has a long service life.

Tight Connection: This Exhaust Spring Bolt Kit has the advantage of ensuring a tight and leak free connection. It is designed to work seamlessly with aftermarket replacement parts.

Convenient and Practical: The exhaust spring bolt kit accessories help ensure effective exhaust maintenance and provide all the accessories needed to complete the exhaust work, which is convenient and practical.

Hard Top Torx Screws Bolts Function: for Jeep Wrangler 2007-2018 pillars, windshield frame, hinges, doors and roll bar.

Torx Screws Details: Color: Black, Material: Stainless Steel, Fit Type: Vehicle Specific, Head Style: Flat, Thread Size: M8, Attachment Type: Screw-On. Removable and Durable.

Hardtop Torx Screws Feature: Surface Finish: Black Oxide, Black Powder Coat: Resists Rust and Dirt, Stainless Steel Metal Construction: Strong Stability and Strength.

Packing Including 4 PCS Bolts,4pcs Springs, 4 Pcs Hex Nuts,and 4 Pcs Spring Washers

M10-1.25 Exhaust Bolt,Overall Lenth:67mm Thread Diameter 10 mm, Thread Pitch:1.25 mm .Screw length:19mm, please checking the size when order.

Material:Made by Mild Steel and Zinc coated

Hard Top Torx Screws Bolts Function: for Jeep Wrangler 2007-2018 pillars, windshield frame, hinges, doors and roll bar.

Torx Screws Details: Color: Black, Material: Stainless Steel, Fit Type: Vehicle Specific, Head Style: Flat, Thread Size: M8, Attachment Type: Screw-On. Removable and Durable.

Hardtop Torx Screws Feature: Surface Finish: Black Oxide, Black Powder Coat: Resists Rust and Dirt, Stainless Steel Metal Construction: Strong Stability and Strength.