Best Neresshery in 2026

【Shock Absorber Guarantee】The NER Front Left And Right Sides Are Equipped With Magnetic Ride Control (MRC or MagneRide)Shock Absorbers, The Height And Size Are The Same As The Original Products, With Noise, Stable Driving And Long Service Life

【OE part number 】84176631 89977478 580-1108 580-1032 23151123 23312167 23464589 84061228 75-22345 75-877777769292929292222 B 1752 2345-101 17522345-102 17522345-103 17522345-104 2315115 23151116 2315117 23151118 23151119 15112 0 23151121 23312152 23312153 23312155 23312156 23312158 2283444 22300918 23464582 23464583 23464483 64585 23464586 23464587 23464588

【Compatible With】For Cadillac Escalade 2015-2020; For Cadillac Escalade ESV 2015-2019; For Chevrolet Silverado 1500 2014-2019; For Chevrolet Suburban 2015-2019;For Chevrolet Tahoe 2015-2020; for GMC Sierra 1500 2014-2019;For GMC Yukon 2015-2020; For GMC Yukon XL 2015-2019

【Replacement Part Number】Front:84176631 84977478 580-1108

【Replacement Part Number】Rear:84176675 580-1106 580-1068 23151122 23267007 23290661 23290660.If you are not sure whether this shock absorber is compatible with your vehicle, please tell us your vehicle VIN.

【Compatible Vehicle】This air suspension compatible with Cadillac Escalade 2015-2021,Cadillac Escalade ESV 2015-2021,Suburban 2015-2021,Tahoe 2015-2021,Yukon 2015-2021, Yukon XL 2015-2021.

【Replacement Part Number】Front: 19353951 19300066 580-435 580-433 Rear:580-1091,23487280,19302786,If you are not sure whether this shock absorber is compatible with your vehicle, please tell us your vehicle VIN.

【Compatible Vehicle】This 4x4 Front And Rear Complete Full Set Shokcs And Struts Compatible With Cadillac Escalade 2007-2014,Cadillac Escalade ESV 2007-2014,Chevy Suburban 1500 2007-2014,SILVERADO 1500 2007-2014, Tahoe 2007-2014,Yukon 2007-2014, Yukon XL 2007-2014.

【Mrc Technology】It Comes From The Factory And Uses Fine Craftsmanship For The 2007-2014 Chevrolet Tahoe Suburban GMC Yukon XL Cadillac Escalade ESV WITH ELECTRIC MAGNETIC

【Shock Absorber Guarantee】The 19353951 shock absorber front left and right sides are equipped with Magnetic Ride Control (MRC or MagneRide) shock absorbers, the height and size are the same as the original products, no noise, stable driving and long service life

【Replacement Part Number】 19353951 19300066 580-435 580-433 580-432 580-370 19300037 19300066 19353951 19368455 19353945 19209555 19300031 17522345-101 17522345-102 20810265 25940740

【Applicable Vehicles】Suitable For CADILLAC ESCALADE 2007-2014, For CHEVROLET AVALANCHE 2007-2013, For CHEVROLET SILVERADO 1500 2007-2013, For CHEVROLET SUBURBAN 1500 2007-2014 . For CHEVROLET TAHOE 2007-2014;For GMC SIERRA 1500 2007-2013;For GMC YUKON 2007-2014;For GMC YUKON XL 1500 2007-2014

【Shock Absorber Guarantee】The 19353951 shock absorber front left and right sides are equipped with Magnetic Ride Control (MRC or MagneRide) shock absorbers, the height and size are the same as the original products, no noise, stable driving and long service life

【Replacement Part Number】 19353951 19300066 580-435 580-433 580-432 580-370 19300037 19300066 19353951 19368455 19353945 19209555 19300031 17522345-101 17522345-102 20810265 25940740

【Applicable Vehicles】Suitable For CADILLAC ESCALADE 2007-2014, For CHEVROLET AVALANCHE 2007-2013, For CHEVROLET SILVERADO 1500 2007-2013, For CHEVROLET SUBURBAN 1500 2007-2014 . For CHEVROLET TAHOE 2007-2014;For GMC SIERRA 1500 2007-2013;For GMC YUKON 2007-2014;For GMC YUKON XL 1500 2007-2014

【Condition】:Brand New & High Quality

【Replacement OEM Number】: TR580 TR690 31825AA050 31825AA051 31825AA052 31706AA030, 31706AA030, 31706AA031, 31706AA032, 31706AA033.

【Applicable Vehicles】:For Subaru Crosstrek Forester Legacy Outback Impreza with CVT TR580 TR690 Transmission.

You'll be getting two front and two rear shock absorbers. For vehicles with no suspension modifications or up to 2" front lift systems and up to 2" rear lift systems

Please check description for fitment details.

Brand New In Box

Representative Image Actual Product May Vary

Country of origin : United States

Package Dimensions: 67.792 H x 7.391 L x 7.797 W (centimetres)

Package Weight: 2.449 kilograms

Country of origin : United States

Package Dimensions: 68.58 H x 10.16 L x 10.16 W (centimetres)

Package Weight: 3.198 kilograms

Country of origin : United States

Package Dimensions : 26.8" L x 2.95" W x 2.95" H

Package weight : 5.64 pounds

Includes front and rear 4600 Series Bilstein Shock Absorbers.

compatible with stock height 2001-2010 Silverado & Sierra 2500 HD 4WD.

Monotube gas pressure technology provides improved control and stability, precise handling, ultimate performance, and incredible comfort.

<br>Brand New Set of Bilstein 5100 Series Monotube Shock Absorbers, 2 Fronts and 2 Rear

<br>Fits: | * Chevy: | * Silverado 1500HD: | * 2001-2007 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, Classic, LS, and LT | * Excluding Quadrasteer | * Excluding ZX3 Electronic Suspension | * Silverado 2500: | * 1999-2005 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, Cheyenne, Custom, LS, LT, and WT | * Excluding Quadrasteer | * Silverado 2500HD: | * 2001-2010 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, Classic, LS, LT, LTZ, and WT | * Silverado 3500: | * 2001-2007 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, Classic, LS, LT, and WT | * Silverado 3500HD: | * 2006-2010 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, LT, LTZ, and WT | * GMC: | * Sierra 1500HD: | * 2001-2007 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Classic, SLE, and SLT | * Excluding Quadrasteer | * Excluding ZX3 Electronic Suspension | * Sierra 2500: | * 1999-2004 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, SL, SLE, SLT, and WT | * Excluding Quadrasteer | * Sierra 2500HD: | * 2001-2010 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, Classic, SL, SLE, SLT, and WT | * Sierra 3500: | * 2001-2007 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, Classic, SL, SLE, SLT, and WT | * Sierra 3500HD: | * 2007-2010 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including SLE, SLT, and WT | * Bilstein's old part numbers on these shocks were F4-BE5-D146-H1 on the Fronts and F4-BE5-D147-H0 on the Rears

<br>Includes: | * 2 - Bilstein # 24-186735 Front Shocks, 46mm | * 2 - Bilstein # 24-186742 Rear Shocks, 46mm

REDUCES SAG UNDER LOAD -- Ideal for occasionally hauling or towing varying loads; heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission; see owner's manual)

EXCEPTIONAL HANDLING -- Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency

CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces

MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner's manual)

EASY TO ADJUST -- Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)

EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride

The highest quality replacement strut mount available

Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application

Superior rubber reduces noise, vibration and harshness

REDUCES SAG UNDER LOAD -- Ideal for occasionally hauling or towing varying loads; heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission; see owner's manual)

EXCEPTIONAL HANDLING -- Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency

CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces

REDUCES SAG UNDER LOAD -- Ideal for occasionally hauling or towing varying loads; heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission; see owner's manual)

EXCEPTIONAL HANDLING -- Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency

CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces

DESIGNED FOR TRUCKS AND VANS -- Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling

BUILT TO LAST -- Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear

CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction

All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction

Hydraulic Lockout: Patented unique hydraulic lock-out isolates impact at the limits of suspension travel

High Pressure Nitrogen Gas Charged: High-pressure charge (240-260 PSI) provides a quicker response for excellent vehicle control

DESIGNED FOR TRUCKS AND VANS -- Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling

BUILT TO LAST -- Heavy-duty nitrocarburized rod (non-shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear

CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction

Package Dimensions: 67.9 H x 7.6 L x 7.6 W (centimetres)

Package Weight: 2.436 kilograms

Fit type: Vehicle Specific

Country of origin : United States

Package Dimensions : 26.8" L x 2.95" W x 2.95" H

Package weight : 4.63 pounds

Made in USA

Package Weight : 1.973 Kilograms

Package Dimensions : 26.8 L x 2.95 H x 2.95 W (inches)

Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information

Kit Includes: 2x Rear Shock Absorbers

Detroit Axle Suspension components are ready to meet the rigorous demands of today’s foreign and domestic passenger cars, trucks and SUVs

Item Package Height:20.574 Centimeters

Item Package Length:10.668 Centimeters

Item Package Width:11.43 Centimeters

REDUCES SAG UNDER LOAD -- Ideal for occasionally hauling or towing varying loads; heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission; see owner's manual)

EXCEPTIONAL HANDLING -- Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency

CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces

Lower shock mount, aids in correcting working angle for proper shock function

Constructed of heavy duty stamped steel and powder coated for long lasting finish

On aggressively lowered vehicles, this aids in correcting the shock angle and increasing travel

Maximum performance upgrade with up to 40% more damping performance than standard shock absorbers

Perfect solution when you need to upgrade suspension performance on your GM truck

Truck monotube design outperforms all other standard shock absorbers

REDUCES SAG UNDER LOAD -- Ideal for occasionally hauling or towing varying loads; heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission; see owner's manual)

EXCEPTIONAL HANDLING -- Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency

CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces