Best Netafim in 2026

Self piercing barb

1.5 psi internal check valve

Anti-siphon operation

ADJUSTABLE VALVE - Automatic watering spikes with a drop speed control valve, can control 0-60s/ drop. The drip rate can be adjusted according to the water the plant needs. It can care for your plant for 1-15 days.

ECO-FRIENDLY DURABLE - Self watering spikes are made of high-strength plastic, heat and cold resistance, not easy to break, indoor and outdoor can be installed and used, and can be used repeatedly. Plastic bottles can be recycled to reduce waste and protect the environment.

EASY TO USE - No tools required for installation. Drill a few holes in the bottom of the bottle or cut the end to keep the air flowing, then adjust the control valve and insert the self-watering spikes into the soil. It is a necessary gardening aid.

PRESSURE-COMPENSATING EMITTER: Maintains a constant 2 GPH flow rate even when the water pressure changes

HOW TO INSTALL: attach to end of 1/4 in. feeder line or punch directly into 1/2 in. supply tubing

USE TO WATER A VARIETY OF AREAS: Ideal for individual shrubs and trees in landscapes; and plants in container pots and hanging baskets

2.0 gallon per hour pressure-compensating emitter delivers same uniform flow rate from beginning to end of tubing runs

Slow watering rate allows soil to absorb water more completely in the root zones of plants

Self-piercing design; use with 1/4" Drip tubing or insert into 1/2" or larger Drip tubing

Total length: 5.2 inches / 13cm; water outlet hole diameter: 0.05 inch / 1.4mm. Irrigation angle: 360 degree Suitable for 4/7mm (Inner/Outer diameter) tube. Each dripper has 8 outlet holes at the top.

Make sure the hose is softened before connecting, you soak end of 1/4" tubing in VERY hot water before attaching to the dripper, A firm push with a little added wiggling gets the hose on with sprinkler.

Directs water exactly where you need it in a wide variety of planting areas Applies water similar to a spray head on an underground system for pots, tubs, ground cover, landscaped gardens and Etc...

1.0 gallon per hour pressure-compensating emitter delivers same uniform flow rate from beginning to end of tubing runs

Slow watering rate allows soil to absorb water more completely in the root zones of plants

Self-piercing design; use with 1/4" Drip tubing or insert into 1/2" or larger Drip tubing

Large Water Globes for Plants - Water Plants When Away: 12" high and 3.35 diameter. No micro management needed for up to 2 weeks! Just fill with water, flip and press into the soil, it will self water your plants automatically. Vacations no longer mean death to your plants.

Vacation Water Stakes Easy To Use - simply fill with water, insert aqua bulb and adore your healthy plants.

Energize Your Plants - Watering globes keep plants healthy by delivering the perfect amount of hydration. As the soil dries the ball releases water back into the soil for the correct amount of moisture.

Color: Black and Red Material: Plastic

Connection:1/4-inch barb thread connection, 1/4'' hose, Suitable for 4mm/7mm(Inner/ Outer diameter) tube

360 Degree Adjustable:8 spray hole and can adjust water flow rate , also for cutting off the water flow.Great for watering potted plants,For agriculture, lawn, garden sprinkler irrigation drip

Flow rate remains constant in varying inlet water pressures and positions along length of tubing; Ideal for watering individual shrubs and trees in landscapes, and plants in container pots and hanging baskets

Fits ¼ in. tubing with internal diameter of 0.170 in. or punched hole with diameter of 0.170 in.; 1/2 GPH per emitter

Delivers the same amount of water no matter where they’re positioned on the line and at varying water pressures; Self-cleaning emitter features a turbulent flow design that flushes out sediments to reduce clogging

Economical fan spray jet nozzle provides 90° quarter circle pattern at a 5' spray distance

Adjustable staked riser extends up to 18" above ground to elevate water spray above foliage

Distributes a continuous fan-shaped water spray jet

Releases water in a stream spray, full-circle pattern; amount of water flow is adjusted by turning the dial on the bubbler; Ideal for watering groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs

¼ in. barbed inlet fits into punched hole in supply tubing with outside diameter (OD) 0.250 in.

With this non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source; Increase or decrease water flow by turning the dial; delivers water gradually

Use for spot watering trees and shrubs

Removable top for easy cleaning

Angled 1/4-inch barb tip easily installs to 1/2-inch drip tubing

Normally shuts down during rain and bad weather, saving your valuable scent

Drips daytime only, to get bucks to come during daytime hours

Can operate up to 2 to 3 weeks on 4 fluid ounces of scent depending on temperature swings

360 Degree Adjustable:8 spray hole and can adjust water flow rate , also for cutting off the water flow.Large water passages and self-flushing action help prevent clogging

Connectio: 1/4-inch barb thread connection, 1/4'' hose, Suitable for 4mm/7mm(Inner/ Outer diameter) tube. 【Make sure you put the connected part into the 70~80°water for 10seconds before assmbling. After it cools down the tube will stay tight.】

Widely used:Great for watering potted plants，For agriculture, lawn, garden sprinkler irrigation drip

Barbed ends securely connect in-line into 1/4" Drip irrigation tubing for a leak-proof connection

Multiple drippers can be added along a single section of 1/4" irrigation tubing

Perfect for closely spaced plants or to completely encircle plants, trees and shrubs

DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature

SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing).

PREVENT LEAKS & BLOWOUTS: *****USE 22 UNITS PER LINE AT FULL OUTPUT 25PSI RECOMMENDED***** These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur.

Height: 5.2 inches / 13cm and water outlet hole diameter: 0.05 inch / 1.4mm

Suitable for 4/7mm (Inner/Outer diameter) tube

Water flow can be adjustable by rotating the water outlet hole cap

SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing).

PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur.

DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE.

Flow rate remains constant in varying inlet water pressures and positions along length of tubing; Ideal for watering individual shrubs and trees in landscapes, and plants in container pots and hanging baskets

Fits ¼ in. tubing with internal diameter of 0.170 in. or punched hole with diameter of 0.170 in.; 1/2 GPH per emitter

Delivers the same amount of water no matter where they’re positioned on the line and at varying water pressures; Self-cleaning emitter features a turbulent flow design that flushes out sediments to reduce clogging

Unique Design: 1/4" drip emitter ensures wide water passages, large deep and wide cross-section that improves clogging resistance.Ideally for Garden Pots,Trees and Shrubs.

Adjustable Emitters: you can adjust the water flow mode and sprinkling distance until a complete shut-off by rotating the cap. And the dripper cap can also be opened for easy check and cleaning.

Applicable Irrigation Tubing：Barb connector of adjustable dripper accepts the following micro-tubing:4mm(inner)-7mm(outer). Flexibility- Allows placement of drippers exactly where necessary.

Total length: 5.2 inches / 13cm; water outlet hole diameter: 0.05 inch / 1.4mm. Irrigation angle: 360 degree Suitable for 4/7mm (Inner/Outer diameter) tube. Each dripper has 8 outlet holes at the top.

Make sure the hose is softened before connecting, you soak end of 1/4" tubing in VERY hot water before attaching to the dripper, A firm push with a little added wiggling gets the hose on with sprinkler.

Directs water exactly where you need it in a wide variety of planting areas Applies water similar to a spray head on an underground system for pots, tubs, ground cover, landscaped gardens and Etc...

Material:Plastic;Height of spike:130mm(5.1").

Suitable for 4/7mm (Inner/Outer diameter) tube.

Irrigation angle:Multiple streams provide 360°coverage.

Quantity and size: 60 pieces of irrigation flag drippers in 3 different sizes, each size is with 20 pieces, 1 gallon per hour in black, 2 gallon per hour in blue and 4 gallon per hour in green, the lid color of each size is different, and different droppers work well in controlling the water flow of different soils, convenient for you to manage plants of different habits

Watering entire garden: the flag drippers fit for 1/2 inch trunk lines, also suitable for 1/4 inch branch lines; You can apply the branch lines to irrigate plants further away, ensuring the watering of your entire garden

Practical design: equipped with shut-off valves and 2 barbed pipes in large diameter, these drip emitters can provide stable moisture for different crops, making your garden more alive

SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing).

PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur.

DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE.

Be a Gardening Master with the help of our superior and complete Drip Irrigation Emitters Kit: 100 x drip emitters sprayer + 100 x 1/4" Barbed Coupling for easy connection + Bonus 1/4" Mini Hole Punch to drill the 1/2 inch mainline 1 x Complete Instructions Guide Hard Copy + 1 Grow your Own Vegetables Guide full with pieces of advice and practical tips Digital Format + Grow your Own Fruits Guide Digital Format

Cut down the water bill - Minimize the amount of water loss by watering the roots of the plants with irrigation sprinkler heads. Adjust the water spray by rotating the cap and give your plants the amount of water they need. Use our bubbler sprinkler heads as irrigation drippers for potted plants, drip irrigation sprinklers for vegetables, flower bed sprinkler for elegant roses, drip line sprinkler heads for fruit trees, or irrigation drip system for the lawn.

Make your own irrigation system easier than ever - (1) Using a barb connector, connect the drip irrigation spray emitters to the 1/4 inch drip irrigation tubing (2) connect this line to the 1/2 inch drip irrigation tubing (3) stick the drip irrigation stake into the soil, adjust the desired vortex sprayer width and feed your plant with your own drip system emitters. Designed to work with a pressure of between 15 and 45 PSI, a drip emitters 1/4 will deliver up to a maximum of 60 gallons/hour.

【High Quality】Our Drip Irrigation Emitters are made of durable plastic. Rugged nylon construction helps keep the project placed and lasting performance for longer life in any weather.

【Unique Design】1/4 inch drip emitter ensures wide water passages, large deep and wide cross-section that improves clogging resistance. Ideally for Garden Pots,Trees and Shrubs.

【Easy to Adjust the Height and the amount of water】The tall spike makes these irrigation drippers really easy to adjust height and you can twist the dripping head anticlockwise for stronger water and twist clockwise for weaker water up to stop water.

Color: Black and Red Material: Plastic.

Full open they will cover a 10 to 12 inch circle.

Has a 1/4-inch barb thread connection, Suitable for 4mm/ 7mm(Inner/ Outer diameter) tube.

Flow control knob adjusts water flow from 0 to 16 gallons per hour at 25 PSI

Works with either 1/4-Inch tubing or easily threads into a standard 10-Inch to 32-Inch threaded adapter

Works with most existing drip systems

360 Degree Adjustable: These irrigation drippers are adjustable and can rotate 360 degrees to water in all directions. Turn to the left to close the water outlet, and turn to the right to adjust the water flow.

Effective use of water: These 8-hole irrigation sprinklers will cover a 10 to 12 inch circle when fully opened. Automatic irrigation and high-efficiency irrigation can be realized. Micro-spray design to ease running water.

Application: Sprinklers are very suitable for watering potted plants and vegetables, and can be used in greenhouses, public green spaces, home gardening, agricultural production, horticultural production, etc.

Product included: 50 Pack of Adjustable irrigation mister with 50 connect Tee. In summer,it will provide you a cool outdoor areas.

Multifunction--The water flow of each drip emitter head can be individually adjusted to closed. Allowing to set each plant to receive its customized watering according to its precise needs.

Pressure: 1.5-3kg Flow, rate: 8-10L/H, Spray radius: 0.7-0.9 meters. Materials & color: high quality plastic, orange.