Best Northern Auto Parts in 2026

ALL MELLING BRANDED PARTS

High Volume

Standard Pressure

18% Increased Volume Over Stock

Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.

We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure.

LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor

Genuine GM Part

Genuine GM Part# 12608579

Galvanized Steel

Made In U.S.A.

0.75 Inch Length

Galvanized Steel

Made In U.S.A.

0.60 Inch I.D.

Standard Volume

High Pressure

10 PSI Pressure Over Stock Pump

【Efficient Electric Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 1.5L/min, Engine Oil Flow Rate(40-60℃): 0.3L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, maximum current: 5A, maximum power: 60W

【NOTES】A, This oil transfer pump CAN NOT transfer WATER, GASOLINE, PETROL, FUEL or FLAMMABLE LIQUID. B, Please DO NOT misplace the direction of import and export, positive and negative poles and secure the hose clamps. C, Heat up your engine oil to 104°F-140°F before pumping D, We tested oil pump before shipping, there might be little oil stain in the pump, kindly understand. E, To make it last longer, it’s recommended to keep a little oil inside when the extractor pump is not in use.

【Premium Quality】The quality of oil change pump extractor varies widely. We are using pure copper for the motor and alligator. Good electrical conductivity, corrosion resistance and rust free, effectively avoid leakage or short circuit. Overheat protection will cut off the power supply automatically for safety

【Powerful Motor】It can transfer up to 45L/min with a 175W 3600rpm motor, allowing you to extract oil or diesel from your vehicle quickly.

【Safety Assurance】A self-priming, rotating vane pump with an on/off switch and an inner bypass valve ensures reliable operation every time.

【Convenient】The pump can pump can lift oil up to 32 feet so that you don’t need to lift the barrels and tanks making for very convenient on-site transfer of diesel from barrels and drums to diesel powered vehicles and equipment.

【12V 80W Oil Extractor Pump】Included: 1 x Pump; 1 x Outlet Hose; 1 x Inlet Hose; 2 x Hose Clamps; 2 x Bigger Battery Clamps; Ideal for Motorcycles,Cars,Quads,Truck,Boat,Forklift,Generator,Tractor,Scooter and other 12V vehicles.

【Specification】This update oil diesel extractor pump is 12V 80W. Maximum current: 6A. Perfect for quick and easy oil changes that you can do at home. It can be used for changing oil 3L/min.

【Quick and Clean】Ideal Equipment for quick and clean oil-changes. No need to lay under the machines or vehicles.Easily removes oil from cars, motorcycles, RVs, boats, lawn equipment without removing the drain plug.

Manufactured to fit a specific application

Provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system

It is recommended that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation

ALL MELLING BRANDED PARTS

Fit type: Vehicle Specific

Package Dimensions: 9.63 L x 0.5 H x 6.88 W (inches)

Package Weight : 0.41 pounds

compatible with 1994-Up Small Block Chevy with 3/4" Tube

Shaft and screen included in this exclusive kit.

compatible replacement for 1994-Up Vortec Small Block Chevy

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.

GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle

Oil Pump Pick-Up Tube Brace or Girdle

Compatible with GM LS Chevrolet Small Block V8 Gen. III/IV (LS Based) 4.8 L / 293 in3 L20, LR4, LY2 5.3 L / 325 in3 L33, L59, LC9, LH6, LH8, LM4, LM7, LMG, LY5 5.7 L / 346 in3 LS1, LS6 (commonly referred to as 350) 6.0 L / 364 in3 L76, L96, LFA, LQ4, LQ9, LS2, LY6 6.2 L / 376 in3 L92, L99, LSA, LS3

Girdle Material - Aluminum

0

0

0

Steel pickup is precision bent and heliarc welded

Black oxide finish

Welded wire mesh steel screen

Product Type :Auto Part

Package Dimensions :8.0" L X6.0" W X5.5" H

Package Weight :1.0Lbs

366 396 402 427 454 Big Block Chevy's with a 81/2- to 9" Deep Oil Pans.

Drive Rod & Pick Up Screen Included

Melling or Mahle brand pump depending on availability. Same pump in box.

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.

GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle

Melling Select Performance Engine Oil Pump Pickup Tube Bracket P/N:M29500

Galvanized Steel

Made In U.S.A.

7.250 Inch Length

Product Type :Auto Part

Package Dimensions :6.8 Cm L X12.0 Cm W X18.4 Cm H

Country Of Origin :China

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.

GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle

Canton Racing Products 15-647 Oil Pump Pick-Up for # 15-644S

Tig Welded

Made in the USA

Oil pickup for 75" deep circle track stock appearing Canton Racing 11-200/11-200M/11-200T oil pans

Made In USA

Works with a M-55 or M-55A standard volume oil pump

Fitment:2009-2019,4.8L/5.3L/6.0L/6.2L/6.6L/7.0L,Chevy,Avalanche/Camaro/Caprice/Cheyenne/Colorado/Corvette/Express/Cargo/Impala/LCF3500/Silverado/SS/Suburban/Tahoe/Trailblazer,GMC CANYON/Envoy/Savana/Sierra/Yukon,Hummer H2/H3/H3T,PONTIAC G8,SAAB 9-7X

Replacement Part Number: 12621234,12596951,55488247, 926-04112585328,917-143

The sensors include 1x engine oil pressure sensor, 1x filter, specifically designed to withstand extreme pressures and temperatures for reliable performance and accurate measurements