Best Onerc in 2026

Suits for 1/10 RC Crawler Axial SCX10 SCX10 II Wraith Capra SMT10 AX10 Yeti RR10 Bomber.

Made of hight quality aluminum. Novel appearance and exquisite workmanship.

Hard Anodized.

Suits for 1/10 RC Crawler Axial SCX10 III Capra 1.9 UTB Unlimited Trail Buggy.

Made of hight quality brass. Novel appearance and exquisite workmanship.

Weight: 4.4g/pcs

✔Weight: About 87.8g/pc,100% New, Made of high quality Brass,Black-Anodized,Exquisite Workmanship

✔Compatible with: Traxxas TRX-4 RC Crawler Car

✔Package Contain: 1 Piece (Screws Included,As shown)

Made by Hot Racing; Hot Racing is a United States based company; parts are sourced from Chinese producers

All Hot Racing upgrade parts are direct replacements for stock components; additional parts are not required

Hot Racing part number AON24M02; UPC 083745896633

✔500pcs in total,Various Size,A must have for your RC Vehicles Trucks Buggy, Short Course,Crawlers, On-Road,Off Road,etc.

✔Packed in Transparent Box(Approx 175x100x21mm) ,Keep your screws organised Easy to take and use

✔Compatible with:Spare Parts for Mostly Brands 1:8 1/10 1/12 1/16 Scale Models,Such as TRAXXAS / HPI / Team Associated / Redcat Racing / Axial / Exceed RC / Losi / RC4WD / HSP / Himoto / Tamiya,HobbyPark,etc

Good Quality -- Made of high quality material, high sensitivity, and quickly dissipate heat, stable and low-noise

Replacement Accessory -- Well-controlled, A great replacement for the old or damaged RC part

Stable performance --Reinforced metal gears, enhance anti-interference ability, make RC car respond quickly

Made of high quality material, high sensitivity, and quickly dissipate heat, stable and low-noise

Well-controlled, A great replacement for the old or damaged RC part

INJORA digital servo, enhance anti-interference ability, make RC car respond quickly

Made of high quality material, high sensitivity, and quickly dissipate heat, stable and low-noise

Well-controlled, A great replacement for the old or damaged RC part

INJORA digital servo, enhance anti-interference ability, make RC car respond quickly

PERFECT FIT: Powerful servo replacement part for remote-controlled cars and trucks

WATERPROOF: Waterproof housing protects the internal mechanisms from water damage

REBUILDABLE: Rebuildable with the 2072R gear set and 2074 servo case

Include 2 sets servo mount

Compatible with Tower Pro MG996, MG996R, MG995, SG5010, MG995R or HS322, HS422, Hitec, Parallax, Futaba S3003, etc 40×20×36mm servo.

This set bracket can be assembled to a 2 Degree of Freedom gimbal. Pan and Tilt for a horizontal surface

Torque: 6.0V: 125.0 oz-in (9.00 kg-cm)

Size: 55.1mm x 20.1mm x 38.1mm Tall

Length of Wire is 9 Inch

High torque waterproof servo

80 oz-in torque

Transit time 0.23 sec/60°

Large Torque - 24KG high torque DC motor digital servo. The maximum torque is up to 24 kg-cm (333 oz-in) @ 8.4V. Operating Voltage: 4.8V ~ 8.4V

High Quality - Equipped with CNC Aluminum middle shell can enhance the heat dissipation; Titanium gear with high accuracy performance, service life has been greatly increased.

High Precision - Advanced linearity and accuracy with precision potentiometer with new design, stable, low noise, IP65 waterproof, dust-proof.

Made of high quality metal

Equipped with screws

It help to install the servo on the front axle

INCLUDES 5 (Five) Servo Extensions

6" / 150mm Long

Futaba Style Connectors

✔️【Compatibility】Emax ES08MAII 12g analog servo compatible with 1/24 Axial SCX24 Bronco/C10/JLU/Gladiator/Deadbolt/B17.

✔️【High Torque Servo】Maximum torque is up to 2 kg/cm (6V), It can be easily dealt with in the most extreme RC action, elevating your steering performance to the next level with the High-Torque servo.

✔️【High Execution】 Lightning-quick steering response, 0.10-0.12 sec/60 degree, EMAX high-torque steering servo is a perfect upgrade for high-demanding applications.

Upgrade version: programmable, 8.4V high voltage application

Stall Torque: 3.8 kg-cm (52.77 oz-in)  @ 6.0V; 4.5 kg-cm (63 oz-in) @ 8.4V

Operating Speed: 0.13sec/60° @ 6.0V; 0.10sec/60° @ 8.4V

Nice Combination: this SCX24 servo is equipped with a metal mount bracket and a servo horn, replacing the original plastic accessories

Good Performance: high precise metal gear, with better accuracy and longer service life

Reliable Material: this kit is made of reliable solid brass, which is wear resistant, strong and serviceable, providing you with a long service life

Easy mounting in the Traxxas X-Maxx

Waterproof case for all elements

High quality Traxxas replacement part

The MG996R servo motor offers an increase in speed, tension and precision over the SG90 and MG90S micro servo motors. This high-speed standard servo motor can rotate 180 degrees (90 in each direction).

MG996R is compatible with most standard receiver connectors, suitable for Futaba, Hitec, Sanwa, GWS, etc. It is a digital standard servo with excellent performance.

MG996R servo torque is 4.8V 13.5kg/cm, 6V 15.2kg/cm. Positioning speed: 4.8V no-load 0.17s/60 degrees; 6.0V no-load 0.15s/60 degrees. Recommended voltage: 5V, current use: 3A.

Metal material and durable.

Upgrade metal steering servo part.

Metal material and durable.

✔️【Compatibility】Emax ES08MAII 12g analog servo compatible with 1/24 Axial SCX24 Bronco/Deadbolt/Gladiator/JLU CRC/C10.

✔️【High Torque Servo】Maximum torque is up to 2 kg/cm (6V), It can be easily dealt with in the most extreme RC action, elevating your steering performance to the next level with the High-Torque servo.

✔️【High Execution】 Lightning-quick steering response, 0.10-0.12 sec/60 degree, EMAX high-torque steering servo is a perfect upgrade for high-demanding applications.

High Quality Copper front bumper mount for Traxxas TRX-4.

Light weight and portable to carry.

Easy to install and durable in use.

Waterproof Servo: IP67 high waterproof grade allows you to play your RC model in drippy environments

High Torque Servo:6.0V -8.4V high oprate voltage.This 45kg waterpoof steering servo's maximum torque is up to 45 kg/cm@8.4V,controllable angle range from 0 to 180 degrees

Full Metal Gear Steering Servo:Equipped with stainless steel gears,full CNC aluminium shell,less noise,light weight.Dual ball bearings.Excellent linearity,high speed servo precision control

RampCrab 13g servo for axial scx24 is the perfect upgrades for your RC car, With aluminum alloy servo mounting bracket and servo arm

Easy to control, A great replacement for the axial scx24 stock steering servo

The steering servo for scx24 made of high quality material, high sensitivity, quickly dissipate heat, low-noise and durable

The servo mount compatible with 1/8 Arrma Kraton BLX ,Outcast BLX, Senton BLX, Talion BLX & Typhon BLX rc car.

Made of aluminum alloy,CNC machined for high precision,durable to use.

Easy to install,provides a solid platform to mount the steering servo.

Product Name : Aluminium Servo Mount - 1 Set

Made from quality light weight high tensile strength aluminum 6061T6 for maximum performance and greater stability. Unique 3D streamline and slim cut design makes the part lighter and looks better than original solid design.

Original stock part number : AR320193.

✔Compatible with: Traxxas TRX-4 1/10 Scale RC Crawler Cars

✔CNC machined for precision.Increased strength and precision.Easy to install.

✔These option parts made of 6061-T6 aluminum, Anodized, for lightweight and durable performance.

【Superior material】:The steering connecting rod is mainly made of high-quality metal, and the servo bracket mounting seat is made of high-quality aluminum alloy material, which has strong wear resistance, corrosion resistance, no rust, and is durable.

【Easy installation】:the servo bracket mounts can be firmly assembled together without any other accessories, it is very easy to install and does not need to spend too much time.

【Compatible with】:Servo bracket with steering linkage, suitable for AXIAL SCX10 II 90046 1/10 RC cars. Can be a good replacement for old or broken accessories.

【Premium Material】The RC servo mount is made of highquality aluminum alloy material, rustproof, wearresistant, durable and practical parts.

【CNC Machining】The RC servo mount adopt CNC machined size, provide stable performance, is great replacement accessory for model parts.

【Adopt Anodized Treatment】The RC servo mount has precise appearance, perfect style, which can adopt anodized treatment, convenient to install and detach.