Best Oni Tools in 2026

Applications of this adjusting tool include Ducati 1098, 1198, Streetfighter-1098, Multistrada 1200, Monster 1200, 1199, Diavel and all other Single Sided Large Axle Swingarms

Use alone or with a 3/8"D wrench for the adjustment of the drive chain on motorcycles fitted with single sided swinging arms

Alternative to 88713.1038 or 887131038. Manufactured precisely to fit the eccentric spanner nut

Tool used on Knorr Bremse Calipers type SB SK SN typically found for Volvo Peterbilt DAF Foden MAN Mercedes Scania BOVA plus BPW SAF Trailers.

113826 OEM Replacement 11point x 3/8 D 26 mm long.

Our brake caliper socket replaces the original which was manufactured from Chrome Vanadium

APPLICATION: Detroit Diesel S60, Cummins, Caterpillar, MBE900, and MBE4000.

ALTERNATIVE TO: OTC5869-1 and Kent-Moore J-47912-QC 5869-1 Detroit Diesel Coupler Fitting Tool

PRODUCT SPECS: Thread size | 1/4" NPT male - Hex size | 13/16"

Use this extractor on tapered roller bearing Eaton 4301851 Auxiliary C/S Large Bearing for Front and Rear 713 913 918 Series.

Made from high-quality materials with precision to aid our mechanic community.

Heavy duty steel structure machined and finished with powder coating to resist corrosion and ensure a long-term and reliable performance.

Direct replacement for Rotunda OEM parts 303-1509 ST-138 303-1514 ST-148 303-1510 ST-137B 303-1513 ST-152. Our tools may be purchased individually as ONI444C, ONI445C, ONI448C and ONI449C.

Designed to fit for 2011 to 2021 Ford Super Duty F250, F350, F450, F550, 6.7L Power Stroke Diesel, 2016 to 2022 Ford Super Duty F650, F750 6.7L Power Stroke Diesel, Low Cab Forward, E-Series, and Excursion.

This seal driver and puller set will help you remove and install the front and rear crank oil seals BC3Z6701A, LC3Z-6700-A, BC3Z6700A, BC3Z6301A or BC3Z-6301-A and for Navistar 711004. With our new design tool 303-1509-01 will no longer be required, leaving no margin for errors.

Direct replacement to OEM part numbers 303-484, T94T-6700-AH and ZTSE4310.

Tool set replacement for Ford Powerstroke Engines 7.3L, Super Duty F250,F350, F450 and F550 or International Navistar T444E 6.9L.

Our dual usage tool was designed to install both the front seal and the damper.

Alternative to OEM 3824498 and 1338. Installation tool for seal numbers 3937111 and 3904353 or seal from kit 3802820.

Fits for Dodge Cummins 3.9L 5.9L 6.7L, including 1989-2016 Cummins 4BT 3.9L, B Series 5.9L, ISB 5.9L 6.7L and QSB 5.9L 6.7L,1989-current

Applications also include Paccar PX-6, 1989-2016 engine.

PREMIUM - Precisely machined HEX & Torx sizes. Crafted and Designed with superior materials for increased torque and unmatched hardness.

DURABLE - Industrial grade, heat treated S2 alloy steel will increase turning power. Heavy-duty, will outperform the regular cr-v or common carbon materials.

LONGEVITY - Manganese Phosphate coating for rust and corrosion protection. Plus, the chamfered edges and ball end design will provide up to 25-degree angle entry.

Removable Power Tools Accessory Case

Quick Release, 72 Tooth Ratchet for high torque ratcheting

Durable anti-slip vinyl grip bit driver with maximum comfort.

PRECISE - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.

DURABLE - Reinforced ratchet gear head constructed from hardened, heat-treated Chrome Vanadium alloy steel.

LONGEVITY - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.

measurement_system

Extremely robust and durable

Suitable for 1/4" hex bits under DIN 3126-C 6,3 and E 6,3, ISO 1173 and Wera series 1 and 4, Wera Adaptor 870/1 for 1/4" sockets

Includes 15-pc. combination wrenches: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in.; Roll-up storage pouch

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

Applications of this adjusting tool include Ducati 1098, 1198, Streetfighter-1098, Multistrada 1200, Monster 1200, 1199, Diavel and all other Single Sided Large Axle Swingarms

Use alone or with a 3/8"D wrench for the adjustment of the drive chain on motorcycles fitted with single sided swinging arms

Alternative to 88713.1038 or 887131038. Manufactured precisely to fit the eccentric spanner nut

Heavy duty CrMo steel construction

3/8 inch square drive on both ends

Fits internal hex on many late model sport bike axles and some dirt bikes

CORROSION RESISTANCE: Full Polish Chrome Finish

QUICK ENGAGEMENT: 12 Point Box End with fastener

ADDITIONAL KNUCKLE CLEARANCE: 15° Box End Offset

Set Includes: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8"

Individually tested to 10,000 volts AC and rated to 1,000 volts AC for safety and peace of mind

Black oxide finish for corrosion protection

LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.

CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.

RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.

Includes 8-pc. stubby combination wrenches: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in.; Wrench holder

Short length and a slim body make it easy to operate in areas with limited room

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

15° offset for better access in tight spaces

Off-corner loading design on box end provides better grip and reduces fastener rounding

Long pattern beam length for improved reach, leverage and torque

Gearwrench's off-corner loading design has an open end, stronger grip, reduces fastener rounding, and has up to 25% more torque

Gearwrench's Wrench Set has an off-corner loading design on box end for better grip and reduced fastener rounding

15° offset box end for better access

Solution to the extraneous rust problem: fasten stainless screws with stainless tools

Hex-plus allows hexagonal socket screws to live longer

Stainless l-keys prevent extraneous rust on stainless screws

Combination Wrench Set Comes with Lockable Stacking Cases

Stamped hashmark pattern on SAE combination wrench set handle provides added grip points.

Longer panel design gives more torque during use.

Includes 15-pc. inch combination wrenches: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in.; 15-pc. metric combination wrenches: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 mm; Roll-up storage pouches

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

15° offset for better access in tight spaces

Off-corner loading design on box end provides better grip and reduces fastener rounding

Long pattern beam length for improved reach, leverage and torque

Long Pattern Length

Offset Box End for Increased Access

Surface Drive Plus on Open End: Stronger Grip, Reduces Fastener Rounding

CORROSION RESISTANT: The combination wrench has chrome finish for corrosion resistance

QUICK ENGAGEMENT: 12 point box end for quick engagement with fastener

KNUCKLE CLEARANCE: 15 degree box end offset for additional knuckle clearance

Product 1: 72 tooth ratcheting box end needs a minimal 5° to move fasteners vs 30° for standard wrenches

Product 1: Off corner loading design on box end provides better grip and reduces fastener rounding

Product 1: Pass thru technology works down any length of threaded rod and long bolts

INDUSTRIAL GRADE - Forged from high-quality chrome vanadium steel, highly polished surface, the torque is over DIN3113 standard, overall hardness reaches HRC48, more durable, stronger and corrosion resistant.

12 SAE WRENCHES - 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8"

PRECISION DESIGN - The 180 degree Flex-Head can perform precise repair work in any space. The 72-tooth ratchet gears need only a 5-degree working swing arc suitable for any narrow space. High torque to tighten or loosen any bolts without rounding.

INDUSTRIAL GRADE - Forged from high-quality chrome vanadium steel, highly polished surface, the torque is over DIN3113 standard, overall hardness reaches HRC48, more durable, stronger and corrosion resistant.

10 METRIC & 10 SAE WRENCHES - 6mm, 8mm, 10mm, 12mm,13mm, 14mm, 15mm, 16mm, 17mm, 18mm & 1/4‘’, 5/16‘’, 11/32‘’, 3/8‘’, 7/16‘’, 1/2‘’, 9/16‘’, 5/8‘’, 11/16‘’, 3/4‘’.

PRECISION DESIGN - The 72-tooth ratchet gears need only a 5-degree working swing arc suitable for any narrow space. High torque to tighten or loosen any bolts without rounding.

CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.

RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.

CHAMFERED OPENING: Quickly aligns fastener to socket.