Best Onmtio in 2026

Package Include Tool: Include 1x CV Boot Gaiter Kit, 1x CV Boot Installation Tool.

Premium Car Accessories: Universal and made of high quality rubber, durable.

Easy for Installation: The CV Boot Gaiter Kit can prevent the car from carrying dust while driving and extend the life of the bearing.The CV Boot Installation Tool Saves the installation time to replace CV Boot Driveshaft Joint Kit Process.

Made of High Quality Plastic, durable and cycle use.

Easy to handle and improve the effective to repair CV Boot Set replacement.

Smooth Surface to keep the CV Boot keep a New Condition to replace. extend its using time for you car。

Universal Air Intake Kit: 76mm 3 Inch or 64mm/2.5"(using inclusive reducer) Cold Air Intake Filter, fit to most of air intake systems on modified on modified vehicles. Universal fitment, for easier installation.

Premium Durable Material: Made of Aluminum alloy material,high temperature resistant and anti-corrosion, ultra durability.

What You Will Get: 1 x Car cold intake pipe, 1 x Silicone joiner, 2 x Hose clamp, 1 x Tube hose, 1 x Mounting bracket.Please refer to this cool hose detailed dimensions before purchasing.

MATERIAL: These pliers are constructed from drop forged steel with a Manganese Phosphate coating to prevent rust and corrosion.

HEAVY DUTY HOSE CLAMP PLIERS: Heavy duty hose clamp pliers are ideal for quickly and easily fitting and removing clic and clic R hose clips.

PVC HANDLE DESIGN: Non-slip handle assure steady grip and decrease hand fatigue during use.

CV joint boot clamp wrench securely fastens band-it style free-end clamps, roll band clips and pre-formed CV boot clamps

Use by turning the winding mandrel with a 1/2-inch socket or wrench

Measures 11-1/2 inches long

Fits shaft size 19mm-24mm

- Enables the repair of cv joints by replacing old, worn out boots without needing to remove the axle itself

- Specially Formulated, Highly Flexible & Durable so it can be installed with the use of a Pneumatic CV Boot Installer, an Installation cone or the Traditional Way

[Effortlessly Install CV Boot Clamps]: Use the ABN CV Joint Ear Clamp Banding Tool - 10mm Fuel Hose Vacuum Hoses Clamping Tool to tighten and secure a CV boot banding strap quickly and easily

[Fits Your Needs]: Use with banding straps up to 10 mm (2/5in) wide; Suitable for ear-type hose clips found on a fuel, cooling, and vacuum hoses and on steering gear gaiters; Compatible with VAG, Opel, BMW, Mercedes Benz, Honda, Mazda, and more; Also use to secure late model GM CVJ

[Easy To Use]: Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip tool nose and through winding mandrel slot; Place 1/2-inch ratchet wrench on winding mandrel; Bend band back over boot and onto clip to apply tension and cut; Fold remaining band tail into clip and secure by tapping down clip ears; Double wrap for added strength

The perfect set for fast and simple tensioning and securing of CV boot banding strap.

CV boot clamp installer With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively.

This tool is essential for fixing CV boots CV joint boot clamp plier set Heavy-duty pliers with steel jaws and formed handles for extra comfort in use.

☛ 1, 【Brand Advantage 】----- Join the 5 million Customers powered by our leading Product and Service. CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots.

☛ 2, 【With 8Pcs CV Boot Clamp】 ----- Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle.

☛ 3, 【With Ear Clamp Pliers and CV Joint Boot Clamp Pliers 】 ----- The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity.

USE: This CV joint boot clamps pilers are key tools to fix the CV boots. They are used to bind, tenseion and sercure CV boot banding straps. It helps you work more quickly.

MATERIAL: Heavy-duty pliers with steel jaws and formed handles for extra comfort in use. CV boot clamp can be tightened and cut quickly and effectively. The CV joint boot clamps pilers are manufactured with pressed steel with black coating. So it is totally rust and corrosion resistant.

SIZE: CV Joint Clamp Tool includes a 4.25-inch (10.8cm) long plastic handle and 1-inch (2.5cm) long rubber grips on side levers; Pliers includes 5.75-inch (14.6cm) long formed rubber handles for ultimate comfort, less user fatigue, and more productivity.

❤ 1. What Will You Get? We prepared 12Pcs small stainless steel cv boot clamps and 12Pcs large clamps for fixing cv boots in this kit! Size: (large one) φ 3/4" - 2" clamps, 7mm in width & 0.6mm in thickness; (small one) φ2"- 4.7" clamps, 9mm in width & 0.8mm in thickness.

❤ 2. Wide Application ---- They will work well with your dorman cv boot kit such as atv's and utv's cv boots. Suitable for steering gear gaiters, fuel hoses on VAG, Opel, BMW, Mercedes-Bens, Honda, Nissan, Mazda etc. A perfect replacement for your car broken drive shaft CV boot clamp.

❤ 3. Simple to Use ---- There is the band that goes round the boot, and then a part of it sticks up like a upside down U and the rest of the band clips into place over the other end of the band making a full loop. You get it as tight as you can then use the pliers to pinch the U shut to tighten it the rest of the way. This would be easier with a drawing. You also could find a video on you tube.

【Universal Fit】Ideal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp plier fits most of cars.

【With 20PCS CV Boot Clamp】 10X small clamps and 10X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It's perfect for you to replace the car broken drive shaft CV boot clamp.

【High-quality Materials】The pliers are made of high-quality stainless steel as a whole, which is durable, corrosion-resistant, oil-resistant, high-temperature resistant, and has a long service life. The clamp head undergoes a quenching process for higher hardness. Equipped with an ergonomically designed non-slip insulated handle, it is practical and comfortable.

【Funnction】This CV joint boot clamps pilers are key tools to fix the CV boots. They are used to bind, tenseion and sercure CV boot banding straps It helps you work more quickly.

【Design】The CV joint boot clamps pilers are newly deisnged with a buit in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. And the CV joint boot clamps pilers are manufactured with pressed steel with black coating. It looks much more shinning and it is totally rust adn corrosion resistant.

【Size】There are two parts with the CV joint clamp tools, including a 4.25 inch (10.8cm) long plastic handle and 1 inch (2.5cm) long rubber grips on side levers. Pliers includes 5.75 inch (14.6cm) long formed rubber handles.

☛ 1, 【Brand Advantage 】----- Join the 5 million Customers powered by our leading Product and Service. CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots.

☛ 2, 【With 8Pcs CV Boot Clamp】 ----- Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle.

☛ 3, 【With 2Pcs CV Joint Boot Clamp Pliers 】 ----- The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity.

【Applicable】The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity.

【Material】Pliers constructed from pressed steel with black-coated finish.

【Suitable】Use with any banding up to 2/5 inch (10mm) in width. Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses. Also use to secure late model GM CVJ. Plier works on steering gear gaiters and fuel hoses on compatible with VAG, compatible with Opel, compatible with BMW, compatible with Mercedes Benz, compatible with Honda, compatible with Nissan, compatible with Mazda, and more.

Matches OE form, fit, and function

One piece neoprene boot

Kit complete with boot, grease, and hardware for complete installation

Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.Material:Neoprene

Ideal solution - this kit is a reliable replacement for original components that have failed due to wear

Durable construction - this kit is made from quality components to ensure reliable performance and a long service life

The CV Boot Clamp Pliers is a perfect tool for Ear-Type Clamp Crimping or Removal fits VW, Audi, BMW, Mercedes, Honda, Mazda Vehicles to crimp and flatten the clamp on Ear-Type constant velocity joint boot clamps

CV boot clamp tool constructed from heavy-duty steel with comfort grip handle that will perfect fit all ear-type clamps including GM FWD outboard CV joints, also a good cv boot installation tool suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems

Equipped with in-line jaws on the end, this CV boot tool hose clamp kit can perfectly crimp on clamp ears to prevent damge and offer a perfect crimp on clamp ears to prevent leakage. It's a must-have cv boot repair kit for repairing store

- Enables the repair of cv joints by replacing old, worn out boots without needing to remove the axle itself

- Specially Formulated, Highly Flexible & Durable so it can be installed with the use of a Pneumatic CV Boot Installer, an Installation cone or the Traditional Way

Saves time and money as compared to an axle replacement

Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.Material:Neoprene

Ideal solution - this kit is a reliable replacement for original components that have failed due to wear

Durable construction - this kit is made from quality components to ensure reliable performance and a long service life

◇ CV Boot Clamp Pliers : Use with any banding up to 2/5-inch (10mm) in width; Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses; Also use to secure late model GM CVJ; Plier works on steering gear gaiters and fuel hoses on various brands of cars; Can be used for working on Oetiker System hose clamps

◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness

◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut; To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip; We recommend double-wrapped band for added strength

【CV Joint Banding Tool】The CV joint ear clamp banding tool is the perfect 2-piece tool for quickly and simply tensioning and fixing and even crimping the CV boot banding strap. This tool is essential for securing the CV boot.

【Advantage】The CV joint boot clamp kit has a built-in cutting and winding mechanism, which can quickly and effectively tighten and cut the banding belt. Heavy duty pliers are equipped with steel jaws and anti-skid rubber handle to improve your comfort and work efficiency.

【Hardened Steel】The automotive hose axle pliers tool is made of hardened steel material with black coating on the surface, which can effectively prevent the tool from rusting and corrosion and prolong the service life of the tool.

Bailcast's universal constant velocity joint boot replacement is designed to easily replace your old, worn-out boot and protect your car's auto parts

The Bailcast's gaiter boot is designed to fit almost any vehicle due to its universal form and stretchable materials; cut it to the size that fits your vehicle

Every tool in this kit is ideal to easily operate in the tight spaces where your constant velocity joints are located

Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself

Ideal solution - this kit is a reliable replacement for original components that have failed due to wear

Durable construction - this kit is made from quality components to ensure reliable performance and a long service life

Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself

Ideal solution - this kit is a reliable replacement for original components that have failed due to wear

Durable construction - this kit is made from quality components to ensure reliable performance and a long service life

Applicable: CV Joint Boot Clamp Plier Set Heavy-duty pliers with steel jaws and formed handles for extra comfort in use. Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses. Crimps and flattens clamps on ear type CV joint boot clamps.

High quality: CV joint boot clamp is made by super quality material. Sturdy and Durable, holding steady,high hardness and good toughness.

handle: Ergonomic rubberized handle for a comfortable hand feeling, precision processing, professional design. Please feel free to purchase.

Performance Tool Ear Type CV Joint Boot Clamp Pliers (W83013)

For all ear-type clamps including GM FWD outboard CV joints.

Ideal for installing clamps fuel filters

Saves time and money as compared to an axle replacement

- Enables the repair of cv joints by replacing old, worn out boots without needing to remove the axle itself

Ideal for Preventative Maintenance that keeps the vehicle in its OE State

MATERIAL: The cv joint clamp is made of high quality 304 stainless steel, have good corrosion resistance, strong rust resistance, hard and sturdy.

PRODUCT SIZE: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275" (7mm) in width & 0.023" (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354" (9mm) in width & 0.031" (0.8mm) in thickness.

WIDE APPLICATION: Used on drive & CV Axle, work well with your cv boot kit such as atv's and utv's cv boots. A perfect replacement for your loose or broken cv boot clamp.