Best Osd Audio in 2026

UL/CL3 RATED FOR OUTDOOR DIRECT BURIAL AND IN-WALL INSTALLS - Highest safety standards for custom installs residential or commercial, capable of being used in-wall or buried

OXYGEN FREE COPPER SPEAKER WIRE - Oxygen free copper speaker wire cable we manufacture with high stranded conductors to provide audiophile sound quality to your home theater

UV RESISTANT JACKET - Made with polypropylene, our speaker wire jacket is resistant to UV and suitable for uses that require long term exposure to sunlight

FOR INDOOR/OUTDOOR USE: Heavy-duty two-conductor 14-gauge UL-rated and UV-resistant speaker cable for direct burial outside or in-wall installations

EXCELLENT SIGNAL TRANSFER: Highly conductive, oxygen-free copper strands provide reliable signal transfer for excellent sound quality over long distances

REINFORCED JACKET: UV resistant polypropylene sheath seals out moisture and protects copper strands for long-term dependability

HIGH POWER: The SVC300 is rated at 300 Watts per channel with minimal bass roll-off. It includes front mounted  adjustable impedance jumpers to add up to eight pairs of 8 ohm speakers simultaneously.

VOLUME CONTROL: The controls allow you to adjust the volume of a pair of speakers independently of other speakers in a house audio system. They are ideal for both softer and higher volume locations.

IMPEDANCE PROTECTION: This feature of SVC300 assists in stabilizing the ohm load going back to the amp or receiver with parallel connections to avoid overheating and damaging expensive equipment.

WHOLE-HOUSE VOLUME CONTROL: Trimless Decora style impedance-matching volume control kit for whole house audio systems and dedicated audio zones so you can control speaker volume independently within various areas of your home or office.

DECORA STYLE DESIGN: Installs easily and works with almost any audio system, inlclude white trim plate to match your room décor as well as a 12-point linear control knob to adjust volume from high to inaudible.

INCLUDES ADJUSTABLE JUMPERS: Rated at 300 Watts peak with minimal bass roll-off, includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously depending on what type of load your amp can handle.

POWER: The VMS100 is rated at 100 Watts peak, maintaining the full hi-fi audio frequency with minimal bass roll-off. Adjustable jumpers add up to eight pairs of eight ohm speakers simultaneously.

VOLUME CONTROL: The controls allow you to adjust the volume up or down compatible with almost any dedicated audio zone or whole house sound system. It is ideal for dining rooms, saunas, and porches around the house.

IMPEDANCE PROTECTION: This feature of VMS100 assists in stabilizing the ohm load going back to the amp or receiver with parallel connections to avoid overheating and damaging the amplifier.

FOR INDOOR/OUTDOOR USE: Heavy-duty two-conductor 14-gauge UL-rated and UV-resistant speaker cable for direct burial outside or in-wall installations

EXCELLENT SIGNAL TRANSFER: Highly conductive, oxygen-free copper strands provide reliable signal transfer for excellent sound quality over long distances

REINFORCED JACKET: UV resistant polypropylene sheath seals out moisture and protects copper strands for long-term dependability

HIGH QUALITY: OSD Audio’s CL3/FT4 Speaker Cable Wire is perfect for high-end outdoor or in-wall speaker installation for residential, commercial, or professional use. High stranded conductors will provide audiophile sound for your home theater.

OUTDOOR: Use this wire for low voltage landscape lighting and a direct burial use for outdoor speakers. Enjoy your music outside while entertaining your friends and family. It is waterproof and can be exposed to extreme high and low temperatures.

IN-WALL: Install the highest safety standards with the 16-gauge, 2-conductor CL3/FT4. It’s fire-retardant, specifically designed and approved for in-wall installation to fit in crawl spaces and wall cavities. Run it under carpet or along baseboards.

UL/CL3 RATED FOR OUTDOOR DIRECT BURIAL AND IN-WALL INSTALLS - Highest safety standards for custom installs residential or commercial, capable of being used in-wall or buried.

OXYGEN FREE COPPER SPEAKER WIRE - Oxygen free copper speaker wire cable we manufacture with high stranded conductors to provide audiophile sound quality to your home theater.

UV RESISTANT JACKET - Made with polypropylene, our speaker wire jacket is resistant to UV and suitable for uses that require long term exposure to sunlight.

HIGH POWER: The SVC100 is rated at 100 Watts per channel with minimal bass roll-off. It includes front mounted adjustable jumpers to add up to eight pairs of 8 ohm speakers simultaneously.

VOLUME CONTROL: The controls allow you to adjust the volume of a pair of speakers independently of other speakers in a house audio system. They are ideal for both softer and higher volume locations.

IMPEDANCE PROTECTION: This feature of SVC100 assists in stabilizing the ohm load going back to the amp or receiver with parallel connections to avoid overheating and damaging expensive equipment by matching the impedance.

SOUND QUALITY: The RS850 Outdoor Rock Speaker kicks out 200 watts of high power, producing a clear and rich sound. It has a frequency of 28Hz to 20kHz and an 8” woofer with a sealed voice coil.

APPEARANCE: The RS850 is a fun and unique speaker that is designed to seamlessly integrate into your garden, porch, yard, deck, or favorite outdoor environment due to its realistic rock appearance.

OUTDOOR: With the ability to seamlessly blend in with your home landscape,the OSD Audio Outdoor Rock Speaker is ideal for filling large backyards or patios not just with design, but with surround sound.

OUTDOOR: The OSD Weatherproof In-Ceiling Speaker is perfect for high humidity areas including covered patios and bathrooms. Enjoy music from your sound system both outdoors and indoors.

SOUND QUALITY: The ICE600TTWRS has a 6.5” Cone Woofer with Santoprene Surround and a dual 1” Dome tweeter, delivering clear, high-quality sound.

HIGH POWER: The OSD Weatherproof In-Ceiling Speaker is wired with high power handling of 150 watts for quality sound. With features of dome tweeters and cone woofers, this speaker has a lot to offer.

WEATHER: This versatile speaker is designed to handle all-weather. IP54 rated, being completely sealed from dust, and waterproof protected with short duration of water immersion in splashing and rain.

DESIGN: With a sleek, fully sealed design, the OSD Audio Patio Pair Speaker features a powder-coated rust-resistant grille and mounting brackets, allowing this quality accessory to blend in with the decor.

MOUNT: The included, flexible mounting brackets allow for 180-degree rotation and 60-degree tilt, enabling you to mount either vertically or horizontally, giving flexibility for the best coverage.

BASS: This versatile, all-weather speaker contains a built-in sound port for better bass. The frequency range of 30Hz-22kHz allows great, deep bass. These patio speakers have an impedance of 8 ohms.

MODERN: The AP840’s powder-coated rust-resistant grille provides a sleek, modern appearance while allowing this indoor/outdoor speaker to handle both indoors and outdoors.

OUTDOOR: Due to its weather-resistant design, the OSD Audio Outdoor Patio Speaker Pair has the ability to handle temperature fluctuations from –20F to 200F during changing seasons.

70V SWITCH: This speaker is equipped with an "on the fly" 70v switch assembly which allows an installer to rapidly switch to the correct 70v wattage tap without soldering, tapping or disassembly.

DESIGN: The OSD Audio 70V Commercial Pair Patio Speaker can be daisy-chained for long distance runs. It can be set up for a home patio or commercial locations with 20, 15, 10, 5, and 2.5-watt taps.

MOUNT: There are flexible mounting brackets that allow for 180-degree rotation and assists to mount the speaker vertically or horizontally. Place under a covered area for the speaker to be optimized.

BASS: This versatile, all-weather speaker contains a built-in sound port for better bass. There is a frequency range response of 30Hz-22kHz and an impedance of 8 ohms.

MODERN: The AP840’s powder-coated rust-resistant grille provides a sleek, modern appearance while allowing this indoor/outdoor speaker to last indoors and outdoors.

OUTDOOR: The OSD Audio Outdoor Patio Speaker Pair has the ability to handle temperature fluctuations from –20F to 200F during changing seasons.

MAXIMUM NUMBER OF SPEAKERS - We recommend using no more then 8 pairs of speakers for this unit

150W POWER HANDLING - 150 Watts RMS, Will work with Amplifier Rated up to 300 Watts

SPEAKER WIRE ACCEPTANCE - 2 or 4 Conductor, Stranded, 16 AWG to 14 AWG

DESIGN: The OSD Audio AP850 features an 8” woofer that has the power and flexibility to cover the low and mid-range frequencies, 1” tweeter, and a rust-resistant grille that will complement any backyard.

WEATHER: The OSD Audio surface mount patio speaker pair has the ability to handle temperature fluctuations from –20F to 200F during changing seasons.

MOUNT: The included flexible mounting brackets allow for 180-degree rotation and a 60-degree tilt when mounted either vertically or horizontally. Install speaker under a covered area for the best results.

POWER: This speaker has 150 watts of power with a built-in sound port for excellent bass. An option is to get the AP525 with a 70V switch transformer with 8 ohms for commercial installations.

DESIGN: The OSD Audio Weather Resistant Pair Patio Speaker can be daisy-chained for long distance runs. It can be set up for a home patio or commercial locations with 20, 15, 10, 5, and 2.5-watt taps.

MOUNT: There are flexible mounting brackets that allow for 180-degree rotation and assists to mount the speaker vertically or horizontally. Place under a covered area for the speaker to be optimized.

WEATHER: This versatile speaker is designed to handle all-weather. IPX6 rated, being completely sealed from dust, and waterproof protected with short duration of water immersion in splashing and rain.

DESIGN: With a sleek, fully sealed design, the OSD Audio Patio Pair Speaker features a powder-coated rust-resistant grille and mounting brackets, allowing this quality accessory to blend in with the decor.

MOUNT: The included, flexible mounting brackets allow for 180-degree rotation and 60-degree tilt, enabling you to mount either vertically or horizontally, giving flexibility for the best coverage.

WEATHER: This versatile speaker is designed to handle all-weather. IPX6 rated, being completely sealed from dust, and waterproof protected with short duration of water immersion in splashing and rain.

DESIGN: The OSD Audio 70V Commercial Pair Patio Speaker has the ability to be easily daisy-chained for long distance runs.

MOUNT: The included, flexible mounting brackets allow for 180-degree rotation and 60-degree tilt, enabling you to mount either vertically or horizontally.

70V SWITCH: This speaker is equipped with an "on the fly" 70v switch assembly which allows an installer to rapidly switch to the correct 70v wattage tap without soldering, tapping or disassembly.

DESIGN: The OSD Audio 70V Commercial Pair Patio Speaker can be daisy-chained for long distance runs. It can be set up for a home patio or commercial locations with 30, 16, 8, and 4-watt taps.

MOUNT: There are flexible mounting brackets that allow for 180-degree rotation and assists to mount the speaker vertically or horizontally. Place under a covered area for the speaker to be optimized.

POWER: This speaker has 150 watts of power with a built-in sound port for excellent bass. An option is to get the AP525 with a 70V switch transformer with 8 ohms for commercial installations.

DESIGN: The OSD Audio 70V commercial pair patio speaker can be daisy-chained for long distance runs. Or switch to 8 Ohm and place anywhere in your backyard or home.

MOUNT: The included, flexible mounting brackets allow for 180-degree rotation and 60-degree tilt, enabling you to mount either vertically or horizontally, giving flexibility for the best coverage.

OUTDOOR: This OSD Audio Weatherproof In-Ceiling Speaker is perfect for high humidity areas such as bathrooms and outdoor patios. Enjoy music from your sound system either outside or indoors.

HIGH POWER: Quality 150 Watt sound coverage comes from the 8 inch polypropylene woofer 1 inch and polycarbonate tweeter for this weather resistant speaker to be high power handling.

IN-CEILING: This ICE600WRS speaker gets installed in the ceiling to fill every corner of your house, including covered porches. Your favorite audio entertainment can power the smallest to the largest room.

70V SWITCH: This speaker is equipped with an "on the fly" 70v switch assembly which allows an installer to rapidly switch to the correct 70v wattage tap without soldering,tapping or disassembly.

DESIGN: The OSD Audio 70V Commercial Pair Patio Speaker can be daisy-chained for long distance runs. It can be set up for a home patio or commercial locations with 30, 16, 8, and 4-watt taps.

MOUNT: There are flexible mounting brackets that allow for 180-degree rotation and assists to mount the speaker vertically or horizontally. Place under a covered area for the speaker to be optimized.

OUTDOOR: This BTP525 speaker is weather resistant to be placed either outside to handle harsh weather conditions by the patio, deck, or pool, or indoors for an awesome sound in a home theater.

SOUND QUALITY: With 75 Watts of power handling, this audio speaker features a treated paper cone woofer and a ½ inch PEI dome tweeter for a surround sound stereo while handling the elements outside.

BLUETOOTH: Connect this BTP525 speaker to any device to play music through bluetooth from your backyard patio with up to 75 feet line-of-sight range to produce clear sound.

APPEARANCE: The BTR805 is a fun and unique speaker that is designed to seamlessly integrate into your garden, patio, porch, lawn or other favorite outdoor environment due to its realistic rock appearance.

OUTDOOR: The BTR805 outdoor bluetooth speaker is ideal for filling large backyard or patios not just with a seamless design to blend in with your home landscape, but with surround sound.

SOUND QUALITY: This wireless outdoor rock speaker features a cone woofer and 1” soft dome tweeter to have better bass and clear high ends. Have the speakers 8 to 12 feet apart for the best stereo dispersion.

INDOOR/OUTDOOR: This BTP650 speaker is weather resistant to be placed either outside to handle harsh weather conditions by the patio, deck, or pool, or indoors for an awesome sound in a home theater.

SOUND QUALITY: With 100 Watts of power handling, this audio speaker features a polypropylene cone woofer, a 1 inch soft dome tweeter, and a high definition composite shell for a surround sound stereo.

BLUETOOTH: Connect this BTP650 speaker to any device to play music through Bluetooth from your backyard patio with up to 75 feet line-of-sight range to produce clear sound.

APPEARANCE: The RS670 is a fun and unique rock speaker pair that is designed to seamlessly integrate into your patio, porch, yard, or deck decor due to their realistic rock appearance.

DURABLE: The RS670’s Aerospace Grade, multi-layer Composite Cabinetry is fabricated to withstand rain, temperatures and other harsh weather conditions while producing amplified sound.

SOUND QUALITY: This OSD Audio Outdoor Rock Pair Speaker has a rigid, acoustically inert enclosure, ensuring rich, clear sound with no distortion for years of trouble free performance.

TRIMLESS GRILLE: The OSD Trimless In-Ceiling Audio Speaker Pair is flush mounted and is hardly visible for a hidden impact once installed. Powerful magnets keep the micro flange grilles attached for easy installation.

POWER: The ACE650 has 90 watts of high power handling to be useful in areas you don’t want large speakers intruding your space. It is ready for Dolby Atmos Sound to be more inviting in your home.

DESIGN: These elegant, flush mounted speakers blend into the ceiling or wall and can be spray painted to match the decor. Deep, rich bass and awesome frequency response are tailored for surround sound.

SOUND QUALITY: The High Power Speaker Selector is an effective way to distribute music to four listening zones and play any pair. It is constructed of 16-gauge steel with a durable black powder coating and gray silk-screening.

POWER: The ISS4 includes selectable impedance matching protection circuitry allowing a single amplifier to power multiple pairs of speakers and up to 70W per channel with engaged protection.

CONNECT: The phoenix connectors on the ISS4 are easily removable to give better leverage when terminating the cable. With screw-down terminals, the speaker wire will never come loose.