Best Oznium in 2026

EASY-SEE MODERN FINISH. UNIQUE FLUSH MOUNT BEZEL DESIGN - IDENTIFY WHICH INDICATOR IS LIT UP, EVEN WITH THE SAME COLORS SIDE BY SIDE: Most indicator lights are backlit, making it difficult to distinguish what your panel is trying to tell you when you have multiple lights of the same color side by side. We fixed this confusing problem by using COLORED ACRYLIC LENSES, then added a concave plastic lens for a curved, modern appearance that looks elegant and custom - no matter what your application.

SIMPLEST, CLEANEST PLUG-N-PLAY INSTALLATION - CUSTOMERS LOVE OUR GENEROUS 3 FEET of ZIP WIRE: Simply drill an 8mm (5/16") hole, route through the 3 FEET of 22AWG WIRE, then hook up the +/- (red/black ground) and secure it with the round nut (included). SIMPLE TWO WIRE HOOKUP means you're INSTALLED IN MINUTES and LOW POWER DRAW ensures you can INTEGRATE with YOUR CURRENT 12V D/C WIRING system with 100% peace of mind - NO FUSE UPGRADES REQUIRED!

UNIVERSALLY USEFUL - THINK LIKE MACGYVER: Of course, you'll love how these light up your instrument panel indicators like your brake light, speedometer, tachometer, gauge cluster, check engine indicator, high beam indicator, shifter lights and dashboard lights - but if you're a DIY MacGyver then you'll get a kick out of customers' ingenuity, from custom car and motorcycle lighting, to lighting up a 12v security camera power supply box, and even electric fans - the sky's the limit.

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 11mm (about 7/16") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 11mm (about 7/16") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

EASY-SEE MODERN FINISH. UNIQUE FLUSH MOUNT BEZEL DESIGN - IDENTIFY WHICH INDICATOR IS LIT UP, EVEN WITH THE SAME COLORS SIDE BY SIDE: Most indicator lights are backlit, making it difficult to distinguish what your panel is trying to tell you when you have multiple lights of the same color side by side. We fixed this confusing problem by using COLORED ACRYLIC LENSES, then added a concave plastic lens for a curved, modern appearance that looks elegant and custom - no matter what your application.

SIMPLEST, CLEANEST PLUG-N-PLAY INSTALLATION - CUSTOMERS LOVE OUR GENEROUS 3 FEET of ZIP WIRE: Simply drill an 8mm (5/16") hole, route through the 3 FEET of 22AWG WIRE, then hook up the +/- (red/black ground) and secure it with the round nut (included). SIMPLE TWO WIRE HOOKUP means you're INSTALLED IN MINUTES and LOW POWER DRAW ensures you can INTEGRATE with YOUR CURRENT 12V D/C WIRING system with 100% peace of mind - NO FUSE UPGRADES REQUIRED!

UNIVERSALLY USEFUL - THINK LIKE MACGYVER: Of course, you'll love how these light up your instrument panel indicators like your brake light, speedometer, tachometer, gauge cluster, check engine indicator, high beam indicator, shifter lights and dashboard lights - but if you're a DIY MacGyver then you'll get a kick out of customers' ingenuity, from custom car and motorcycle lighting, to lighting up a 12v security camera power supply box, and even electric fans - the sky's the limit.

EASY-SEE MODERN FINISH. UNIQUE FLUSH MOUNT BEZEL DESIGN - IDENTIFY WHICH INDICATOR IS LIT UP, EVEN WITH THE SAME COLORS SIDE BY SIDE: Most indicator lights are backlit, making it difficult to distinguish what your panel is trying to tell you when you have multiple lights of the same color side by side. We fixed this confusing problem by using COLORED ACRYLIC LENSES, then added a concave plastic lens for a curved, modern appearance that looks elegant and custom - no matter what your application.

SIMPLEST, CLEANEST PLUG-N-PLAY INSTALLATION - CUSTOMERS LOVE OUR GENEROUS 3 FEET of ZIP WIRE: Simply drill an 8mm (5/16") hole, route through the 3 FEET of 22AWG WIRE, then hook up the +/- (red/black ground) and secure it with the round nut (included). SIMPLE TWO WIRE HOOKUP means you're INSTALLED IN MINUTES and LOW POWER DRAW ensures you can INTEGRATE with YOUR CURRENT 12V D/C WIRING system with 100% peace of mind - NO FUSE UPGRADES REQUIRED!

UNIVERSALLY USEFUL - THINK LIKE MACGYVER: Of course, you'll love how these light up your instrument panel indicators like your brake light, speedometer, tachometer, gauge cluster, check engine indicator, high beam indicator, shifter lights and dashboard lights - but if you're a DIY MacGyver then you'll get a kick out of customers' ingenuity, from custom car and motorcycle lighting, to lighting up a 12v security camera power supply box, and even electric fans - the sky's the limit.

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 6mm (about 15/64") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 6mm (about 15/64") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 11mm (about 7/16") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

EASY-SEE MODERN FINISH. UNIQUE FLUSH MOUNT BEZEL DESIGN - IDENTIFY WHICH INDICATOR IS LIT UP, EVEN WITH THE SAME COLORS SIDE BY SIDE: Most indicator lights are backlit, making it difficult to distinguish what your panel is trying to tell you when you have multiple lights of the same color side by side. We fixed this confusing problem by using COLORED ACRYLIC LENSES, then added a concave plastic lens for a curved, modern appearance that looks elegant and custom - no matter what your application.

SIMPLEST, CLEANEST PLUG-N-PLAY INSTALLATION - CUSTOMERS LOVE OUR GENEROUS 3 FEET of ZIP WIRE: Simply drill an 8mm (5/16") hole, route through the 3 FEET of 22AWG WIRE, then hook up the +/- (red/black ground) and secure it with the round nut (included). SIMPLE TWO WIRE HOOKUP means you're INSTALLED IN MINUTES and LOW POWER DRAW ensures you can INTEGRATE with YOUR CURRENT 12V D/C WIRING system with 100% peace of mind - NO FUSE UPGRADES REQUIRED!

UNIVERSALLY USEFUL - THINK LIKE MACGYVER: Of course, you'll love how these light up your instrument panel indicators like your brake light, speedometer, tachometer, gauge cluster, check engine indicator, high beam indicator, shifter lights and dashboard lights - but if you're a DIY MacGyver then you'll get a kick out of customers' ingenuity, from custom car and motorcycle lighting, to lighting up a 12v security camera power supply box, and even electric fans - the sky's the limit.

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 6mm (about 15/64") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 11mm (about 7/16") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

EASY-SEE MODERN FINISH. UNIQUE FLUSH MOUNT BEZEL DESIGN - IDENTIFY WHICH INDICATOR IS LIT UP, EVEN WITH THE SAME COLORS SIDE BY SIDE: Most indicator lights are backlit, making it difficult to distinguish what your panel is trying to tell you when you have multiple lights of the same color side by side. We fixed this confusing problem by using COLORED ACRYLIC LENSES, then added a concave plastic lens for a curved, modern appearance that looks elegant and custom - no matter what your application.

SIMPLEST, CLEANEST PLUG-N-PLAY INSTALLATION - CUSTOMERS LOVE OUR GENEROUS 3 FEET of ZIP WIRE: Simply drill an 8mm (5/16") hole, route through the 3 FEET of 22AWG WIRE, then hook up the +/- (red/black ground) and secure it with the round nut (included). SIMPLE TWO WIRE HOOKUP means you're INSTALLED IN MINUTES and LOW POWER DRAW ensures you can INTEGRATE with YOUR CURRENT 12V D/C WIRING system with 100% peace of mind - NO FUSE UPGRADES REQUIRED!

UNIVERSALLY USEFUL - THINK LIKE MACGYVER: Of course, you'll love how these light up your instrument panel indicators like your brake light, speedometer, tachometer, gauge cluster, check engine indicator, high beam indicator, shifter lights and dashboard lights - but if you're a DIY MacGyver then you'll get a kick out of customers' ingenuity, from custom car and motorcycle lighting, to lighting up a 12v security camera power supply box, and even electric fans - the sky's the limit.

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 11mm (about 7/16") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

PACKS A HUGE PUNCH - TINIEST & BRIGHTEST SIDE VIEW LED: Customers who use these side emitting LED lights say they're the IDEAL BALANCE between VALUE, PREMIUM QUALITY & BRIGHTNESS. They're ELEGANT & TINY enough to be DISCREET during the DAYTIME - yet BOLD enough to POP at NIGHT, making them perfect LED lighting to light up your truck, car interior, motorcycle license plate, or any ambient interior lighting or general project.

THE MOST RUGGED FLUSH MOUNT DESIGN - HIGHEST BUILD QUALITY - IP67 WATERPROOF: Each side view LED bolt is housed inside a TANK-DURABLE threaded aluminum housing encapsulated in ultra-tough silicone, with hard epoxy sealing on the wires backside. Plus their EXTREMELY LOW PROFILE FLUSH MOUNT DESIGN means there's NO PROTRUDING LENS coming loose.

EASIEST, CLEANEST INSTALLATION - MOD IT BEAUTIFULLY w/ 3 FOOT LONG WIRE: If you can flip on a power tool, you can install the Side View LED Bolts. Simply drill a 11mm (about 7/16") hole, route the 3 FEET of 22AWG WIRE, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). SIMPLE TWO WIRE HOOKUP means you're INSTALLED IN MINUTES and LOW POWER DRAW ensures you can INTEGRATE with YOUR AUTO'S WIRING with 100% peace of mind - NO FUSE UPGRADES REQUIRED!

BLINDINGLY BRIGHT: Outstanding value for brightness. Each super thin tiny LED light is a uniform, evenly distributed punch of brightness, with five times the brightness of a regular 5mm LED

SURFACE MOUNT: High quality super bright surface mount LED attached into a tiny, custom designed flexible circuit board with built-in resistor. They can be mounted with the included 3M adhesive.

PREWIRED: 3 feet of wire lead for 5050, and 1.5 feet for 2835. Works on any 12 volt DC system. Pre-installed wiring is secure, rugged, and easy to work with. You can just hook up the red one to positive, and the black one to negative/ground.

PACKS A HUGE PUNCH - TINIEST & BRIGHTEST SIDE VIEW LED: Customers who use these side emitting LED lights say they're the IDEAL BALANCE between VALUE, PREMIUM QUALITY & BRIGHTNESS. They're ELEGANT & TINY enough to be DISCREET during the DAYTIME - yet BOLD enough to POP at NIGHT, making them perfect LED lighting to light up your truck, car interior, motorcycle license plate, or any ambient interior lighting or general project.

THE MOST RUGGED FLUSH MOUNT DESIGN - HIGHEST BUILD QUALITY - IP67 WATERPROOF: Each side view LED bolt is housed inside a TANK-DURABLE threaded aluminum housing encapsulated in ultra-tough silicone, with hard epoxy sealing on the wires backside. Plus their EXTREMELY LOW PROFILE FLUSH MOUNT DESIGN means there's NO PROTRUDING LENS coming loose.

EASIEST, CLEANEST INSTALLATION - MOD IT BEAUTIFULLY w/ 3 FOOT LONG WIRE: If you can flip on a power tool, you can install the Side View LED Bolts. Simply drill a 11mm (about 7/16") hole, route the 3 FEET of 22AWG WIRE, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). SIMPLE TWO WIRE HOOKUP means you're INSTALLED IN MINUTES and LOW POWER DRAW ensures you can INTEGRATE with YOUR AUTO'S WIRING with 100% peace of mind - NO FUSE UPGRADES REQUIRED!

BRILLIANTLY BRIGHT - BE VISIBLE from a FULL 2 NAUTICAL MILES: You've looked around, so you realize this is an outstanding value for the brightness. This light literally POPS at night, CUTTING THROUGH PEA SOUP LIKE FOG that often covers lakes, rivers and the ocean with no advanced warning. Yet unlike similarly bright, older models, our boat navigation light uses COOL LED's, meaning it WON'T HURT YOUR BOAT, nor BURN YOUR SKIN.

USCG CERTIFIED, MEETS ABYC AND NMMA STANDARDS: Tested by USCG approved laboratories. Your safety is our #1 concern so we designed a boat accessories light that beams down at a PRECISE 112.5 degrees, ensuring you're 100% compliant with all United States Coast Guard marine lighting regulations, without upgrading or taxing your boats 12v electrical system. Perfect for Bass, Lake, River, Sailing, Fishing.

PLUG-N-PLAY - EASIEST, CLEANEST INSTALLATION - NO SPECIAL BOATING TOOLS REQUIRED! If you can drill a hole, you can install Oznium Marine Navigation Lights in minutes. Simply drill a 1 inch hole, feed through the SECURE, RUGGED 40 INCH 22 AWG WIRE (included), connect the black wire to negative/ground, then the red wire to positive. Simple 2 wire connection means you're INSTALLED in MINUTES, making these the best all around boat light you can buy.

BLINDINGLY BRIGHT: Outstanding value for brightness. Each super thin tiny LED light is a uniform, evenly distributed punch of brightness, with five times the brightness of a regular 5mm LED

SURFACE MOUNT: High quality super bright surface mount LED attached into a tiny, custom designed flexible circuit board with built-in resistor. They can be mounted with the included 3M adhesive.

PREWIRED: 3 feet of wire lead for 5050, and 1.5 feet for 2835. Works on any 12 volt DC system. Pre-installed wiring is secure, rugged, and easy to work with. You can just hook up the red one to positive, and the black one to negative/ground.

ESSENTIAL ACCESSORIES - OzniumX leather fob case does not only offer ultimate protection against scratches, scuffs and damages for your Tesla Model S key fob, but also features embossed icons on the case to help you find the various key functions.

QUALITY YOU'LL LOVE - Made from premium synthetic leather with microfiber inner, complemented with hand stitching. Easy and comfortable grip, look cool and durable. This design fits the unique shape of the Tesla Model S key fob and the key buttons has a precise position and shape, which perfectly protects the collision and scratches of the car key in daily use.

INSTALLATION IS SIMPLE - To hang on the key ring, simply remove the battery cover of the Tesla key fob, find a post inside, attach the key ring string to the post, then thread it out through the notch.

CUSTOMIZE YOUR LIFE: Light up your dashboard with a unique pop of color unlike anyone else. Replace the LEDs in your car dash, truck, motorcycle instrument cluster, xbox controller, or anywhere else. Outstanding value for brightness.

ULTRA SMALL: Just 3.5 mm by 2.8 mm (about the size of a match head!), the extremely low profile, "out of the way" design doesn't impede anything. The small size makes it look almost hidden.

REQUIRES SOLDERING: You should know how to solder and have steady hands. Or be willing to burn a few trying :)

CUSTOMIZE YOUR LIFE: Light up your dashboard with a unique pop of color unlike anyone else. Replace the LEDs in your car dash, truck, motorcycle instrument cluster, xbox controller, or anywhere else. Outstanding value for brightness.

ULTRA SMALL: Just 3.5 mm by 2.8 mm (about the size of a match head!), the extremely low profile, "out of the way" design doesn't impede anything. The small size makes it look almost hidden.

REQUIRES SOLDERING: You should know how to solder and have steady hands. Or be willing to burn a few trying :)

CUSTOMIZE YOUR LIFE: Light up your dashboard with a unique pop of color unlike anyone else. Replace the LEDs in your car dash, truck, motorcycle instrument cluster, xbox controller, or anywhere else. Outstanding value for brightness.

ULTRA SMALL: Just 3.5 mm by 2.8 mm (about the size of a match head!), the extremely low profile, "out of the way" design doesn't impede anything. The small size makes it look almost hidden.

REQUIRES SOLDERING: You should know how to solder and have steady hands. Or be willing to burn a few trying :)

BLINDINGLY BRIGHT: Outstanding value for brightness. Its so small which allows you to be discreet during the day but then the light is so bright that it really pops at night no matter what purpose you need it for.

ULTRA THIN: Extremely low profile, "out of the way" design doesn't impede anything. The small size makes it look almost hidden.

WIRES ON BOTH SIDES: Works on any 12 volt DC system. Pre-installed wiring is secure, rugged, and easy to work with. It comes with 6 inches of 24AWG wires on each end so you can just hook up the red one to positive, and the black one to negative/ground.

BLINDINGLY BRIGHT: Outstanding value for brightness. Its so small which allows you to be discreet during the day but then the light is so bright that it really pops at night no matter what purpose you need it for.

ULTRA THIN: Extremely low profile, "out of the way" design doesn't impede anything. The small size makes it look almost hidden.

WIRES ON BOTH SIDES: Works on any 12 volt DC system. Pre-installed wiring is secure, rugged, and easy to work with. It comes with 6 inches of 24AWG wires on each end so you can just hook up the red one to positive, and the black one to negative/ground.

ADJUSTABLE BRIGHTNESS AT YOUR FINGERTIPS: With a simple turn of the knob, you can dim down, or brighten up your LEDs. Durable components and a smart energy-saving circuit is designed for steady and smooth operation. No flickering, nor jumping between brightness.

MINI SIZE WITH HIGHEST BUILD QUALITY: This isn't cheaply made junk from overseas. Each OZNIUM mini LED dimmer knob is housed inside a durable aluminum housing encapsulated in ultra-tough silicone.

PANEL MOUNT: You can drill a hole and mount it to a panel. The knob slides on and off from the control shaft.

PROFESSIONAL SMOOTH FADE IN / FADE OUT EFFECT: No more abrupt turn on / turn off of your lights. Instead, they slowly increase in brightness when you turn them on, and slowly decrease in brightness when you turn them off.

CHOOSE FROM 13 SPEEDS: From slow to fast, you can choose from 13 different speeds. Simply press the "Speed" button on the dimmer to cycle the fading speeds. The LEDs will flash once to confirm the speed change.

POWER UP TO 2 AMPS: At 12 volts, you can power up to 2 amps of LEDs. An inline fuse is included for circuit overload protection. Input voltage: 12-24V. Output voltage: 12-24V.

BLINDINGLY BRIGHT: Outstanding value for brightness. They are so small that they allow you to be discreet during the day but then the light is so bright that it really pops at night no matter what purpose you need them for.

SURFACE MOUNT: They can be mounted with the included 3M adhesive. Each module uses 6 PLCC-2 style surface mount LEDs with a wide 120 degree light beam.

16 INCH LONG WIRE: Works on any 12 volt DC system. Pre-installed wiring is secure, rugged, and easy to work with. It comes with a generous 16 inch length of 24AWG wire so you can just hook up the red one to positive, and the black one to negative/ground.

BLINDINGLY BRIGHT: Outstanding value for brightness. They are so small that they allow you to be discreet during the day but then the light is so bright that it really pops at night no matter what purpose you need them for.

SURFACE MOUNT: They can be mounted with the included 3M adhesive. Each module uses 6 PLCC-2 style surface mount LEDs with a wide 120 degree light beam.

16 INCH LONG WIRE: Works on any 12 volt DC system. Pre-installed wiring is secure, rugged, and easy to work with. It comes with a generous 16 inch length of 24AWG wire so you can just hook up the red one to positive, and the black one to negative/ground.

SAFE TO TURN ON & OFF FROM A DISTANCE: Infra-red Non Touch Hand Wave Sensor Switches are ideal to avoid catching virus and germs. Unlike any physical switches, these IR sensor switches are contactless, non-invasive, relatively inexpensive and can be used to switch on/off any 12-24VDC LEDs and devices from a distance.

EASY TO INSTALL AND OPERATE - Each IR sensor switch comes with an adhesive tape for mounting to any clean and flat surface. Simply wave your hand over the infrared sensor to light up your LEDs. Wave your hand over again to turn your LEDs off.

POWER UP TO 3 AMPS: Works on any 12-24V LED light. You can always just snip off the power plugs, and wire up directly to a low voltage 12 - 24VDC power source. Then wire in your LEDs, LED strips, LED tubes, LED floods, etc.

MAINTAIN THE AESTHETIC OF THE DASH - Change the look of your 2021 Model 3 and Y interior instantly. Perfectly match the wood dash of All Black Interior.

SEAMLESSLY FITMENT - Each piece is precision-cut for a perfect installation.

PREMIUM QUALITY - Made of high-quality adhesive film which protects your center console.