Best Panavise in 2025

The original PanaVise Vise suitable for hobbies, electronics, small home repairs and work bench environments

Easy-to-use single knob controls head movement through 3-planes: 90 degree tilt, 360 turn and 360 rotation

Continuous heat tolerance to 200 F (93 C), intermittent heat up to 300 F (149 C)

Powerful suction cup mounts to vehicle windshield. Easily move from vehicle to vehicle or stow for security

Side arms adjust from 2.25" to 3.75" in width to fit nearly any phone (including the most popular handsets; iPhone 5s, iPhone 6, Samsung Galaxy S Series, Motorola, HTC, LG as well as larger phones such as iPhone 6 Plus and Samsung Galaxy Note 4)

Once the arm width is set, phone is easily removed by rocking it to the side with a one-handed motion

Lowest profile Base on the market

Base accepts all 300 series Heads

Accepts all 300 series Heads and any 5/8-Inch (15.9mm) diameter shaft

Powerful suction cup mounts to vehicle windshield. Easily move from vehicle to vehicle or stow for security

Mount should be installed at the base of windshield with the shaft resting on dashboard to support against excessive leverage.

Telescoping arm extends up to 18". Perfect for vehicles with deep dashboards such as trucks and vans.

Single knob controls head movement through 3-planes: 90 Degree Tilt, 360 Turn & 360 Rotation

Jaws are 2.5-Inch (63.5mm) wide, 0.5 (12.6mm) tall and open to 2.25 (57.1mm)

Base accepts all 300 series Heads and any 5/8-Inch (15.9mm) diameter shaft

By centering weight, this Vise Heads holds even larger and heavier objects with ease

Ribbed, neoprene jaw pads are 1.875 (47.6mm) high x 1.5 (38.1mm) wide and provide a sure grip; reverse the pads and the wide V holds round or elliptical objects

Compatible with all 300 series Bases

Clamps to anything up to 3.4375-Inch (87.3mm) thick

Compatible with the 201 PV Jr. Vise, 300 and 305 Bases

Weight: 2.4 lbs. (1.1kg)

Versatile neoprene pads slip over the metal arms on the 366 and 376 Vise Heads

Thick, molded pads have a corrugated surface on one side to firmly hold the most delicate objects

Reverse the pads and use the wide V groove to hold round objects

210° tilt, 360° turn and 360° rotation at both ends

Head plate is molded of durable glass fiber-reinforced composite plastic

Aluminum alloy shaft

Eight rotating adjustment positions at the head, six positive lock positions in the vertical plane, and variable height adjustment

Hold circuit boards up to 12-Inch (304.8mm) wide and up to 0.156 (4mm) thick

5.0 lb Weighted Base is extremely stable

Both adjusting points have a full range of motion: 210° tilt, 360° turn & 360° rotation

1/4-20 mounting stud with lock Ring

Shafts are machined aluminum alloy 0.875" (22.2mm) in diameter

Flat Head is 3 x 6 (76.2mm x 152.4mm). Shaft is 1 (25.4mm) in diameter and 3.25 (82.5mm) long

Shaft is drilled and tapped 1/4-20 (screw included) for permanently securing to base

Height (bottom of shaft to top of head): 4 (101.6mm), Weight: 0.86 lbs. (0.4kg)

Overall mount height (including shaft) is 9-Inch (228.6mm)

210 degree Tilt, 360 Turn and 360 Rotation at both ends

Foot measures 2.5-Inch x 2.5 (63.5mm x 63.5mm)

Reversible ram applies up to 1/4 ton (500 lbs. / 227kg) of pressure and is 0.75-Inch x 0.75 (19.1mm x 19.1mm) square and 5.875 (149.2mm) long

Four adjustable nylon gibs provide exceptional ram control. Arm is 8 (203.2mm) long. Base footprint is 3.7 x 7 (94mm x 177.8mm) and includes four 0.25 (6.3mm) holes countersunk at the corners for bolting to a work surface

Height (from base to top of back not including variable ram height or arm length): 7 (177.8mm), Weight: 5.4 lbs. (2.5kg)

Powerful suction pad attaches to any smooth, flat, nonporous surface including windshields and windows

Rectangular AMPS pattern

Fully adjustable tilt, turn, and rotate system

Delrin pads open 0.5-Inch (12.7mm) and close to zero for holding thin items

Single control knob and exclusive split-ball locks Head firmly in place

Base accepts all 300 series vise Heads

Attaches to a bench vise to provide precise clamping action for detailed, delicate work on small items

Right-angle base is held between the jaws of a bench vise to provide a secure foundation

Swivel head moves in three planes of motion to adjust the jaws for proper placement

Double knuckle design for twice the adjustability

Two adjusting points offer a full range of motion:210° Tilt, 360° Turn & 360° Rotation

Cast aluminum surface mounting plates include an extra hole for routing speaker wire up to 8mm thick

Overall mount height (including shaft) is 6-Inch (152.4mm)

AMPS-compatible. Knob and set-screw adjusting options included.

210 degree Tilt, 360 Turn and 360 Rotation at both ends

Both adjusting points have a full range of motion: 210° tilt, 360° turn & 360° rotation

1/4-20 mounting stud with lock Ring

Shafts are machined aluminum alloy 0.875" (22.2mm) in diameter

AMPS compatible

Knob and set-screw adjusting options included

210 Degree Tilt, 360 Degree Turn and 360 Degree Rotation for full articulation

Small Foot measures 1.625-Inch x 2-Inch (41.3mm x 50.8mm)

The small foot (1.625-Inch x 2) is recommended for under-the-dash installations or wherever space is at a premium. Knob and set-screw adjusting option included.

210 degree Tilt, 360 Turn and 360 Rotation at both ends

This retrofit kit was designed to assist in-house service departments, independent technicians, and medium-volume manufacturers

Requires purchase of the 502 (sold separately)

Includes longer, 12-Inch lever for increased leverage ratio over standard 502 PanaPress, crimp die holders, all mounting hardware and two allen wrenches to ease installation

Small foot

210° Tilt, 360° Turn and 360° Rotation at both ends

Aluminum, zinc and steel construction

AMPS-compatible mounting plate.

Overall mount length (including the shaft) is 14-Inch (355.6mm)

Patented pinch design prevents the flex shaft from coming loose from the base or the mounting plate

The small foot (1.625-Inch x 2-Inch) is recommended for under-the-dash installations or wherever space is at a premium. Knob and set-screw adjusting options included.

Overall mount height (including shaft) is 9-Inch (228.6mm)

210 degree Tilt, 360 Turn and 360 Rotation at both ends

Overall mount height (including shaft) is 4-Inch (101.6mm)

AMPS-compatible. Knob and set-screw adjusting option included

210 degree Tilt, 360 Turn and 360 Rotation at one end

Accommodates up to 68-pin conductor cable

More efficient than hand scissors; won't pull inner wires

Easy to use and operate, slips into the 502 PanaPress with the 506 Retrofit Kit

The ideal circuit board holder for over the edge component boards

Quick adjusting arms open to 4. 5 inches (114. 3mm) wide

210 degrees of Tilt, 360 degrees of turn, and 360 degrees of rotation

AMPS-compatible mounting plate.

Overall mount length (including the shaft) is 12-Inch (304.8mm)

Patented pinch design prevents the flex shaft from coming loose from the base or the mounting plate