Best Peastorm in 2026

Universal performance mufflers 2.5" OD inlet/outlet 15.5" long 4" round body width, as long as your exhaust pipe is 2.5 inch and have enough space to install, it will be fit.

Utilizes spiral design helps strengthen back pressure at low rpms, and improve exhaust efficiency at high rpm.

The quiet resonator adopts a unique double-layer spiral structure, filled with fiberglass absorbs unwanted interior resonance, get a low, deep tone, both ends can be inlet, no inlet or outlet difference.

Dimensions: 12" x 24", 1/2″ thick, heavy duty embossed aluminum.

This heat shield is constructed from 10 mil aluminum bonded to heat-resistant glass fiber, can withstand continuous high temperatures of 1000°F.

Easy to cut and shape, suitable for mufflers, chassis, fuel tank, engine compartments, battery, intake, etc.

Please double check your exhaust size prior to placing your order to avoid restocking and inbound/outbound shipping fees

Y-Pipe - 2" Single, 2" Dual. Check product details below for other sizes.

Pipe have a gentler radius that allows for efficient exhaust gas scavenging, noise Cancellation and better balance between cylinder banks

【Dimension】Inlet Diameter:4"; Outlet Diameter: 6"; Overall Length: 15".

【Design】Bolt On - Rolled Edge - 45 Degree Single Angle Cut.

【Material】High quality stainless steel mirror polished. Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and deformation.

【Dimension】4 inch Inlet; 7 inch Outlet; 18 inch Overall Length Exhaust Tip.

【Design】Bolt On - Rolled Edge - 70 Degree Single Angle Cut Muffler Tip.

【Material】The 4 ID Exhaust Tailpipe made of High quality stainless steel mirror polished. Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and deformation.

【Dimension】4 inch Inlet; 8 inch Outlet; 18 inch Overall Length.

【Design】Bolt On - Rolled Edge - 45 Degree Single Angle Cut.

【Material】High quality stainless steel mirror polished. Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and deformation.

Outside Diameter 2.00 inch /50.8mm - Wall Thickness 0.06 inch /1.5mm

Universal, Stainless Steel, Nonmagnetic

90-Degree & 180-Degree Mandrel Bends

Outside Diameter 2.25 inch 57mm - Wall Thickness 0.06 inch 1.5mm

Outside Diameter 2.25 inch 57mm - Wall Thickness 0.06 inch 1.5mm

Universal, Stainless Steel, Nonmagnetic

Please double check your exhaust size prior to placing your order to avoid restocking and inbound/outbound shipping fees

Y-Pipe - 3" Single, 3" Dual. Check product details below for other sizes.

Pipe have a gentler radius that allows for efficient exhaust gas scavenging, noise Cancellation and better balance between cylinder banks

Dimension: standard 4" x 6" x 15"(inlet, outlet and overall length); ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0" before purchase)

Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well; plus, a drainage hole helps drain water to prevent rust

Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound; meanwhile, the black powder coated finish offers your car with an elegant & mysterious appeal

▲ A pair of single chamber performance race mufflers.

▲ 7 inches (about 17.8 cm) muffler body height, 3 inches (about 7.6 cm) muffler inlet diameter.

▲ The chamber muffler is designed to create deep throat swelling and muffle exhaust noise.

SIZE: 2.5" (2 1/2") ID,2.625"(2 5/8") OD, 8 inch outer length(total length including extension), 1 Piece of 100% Brand New Double Braided Flex Pipe.

MATERIAL: Made by Stainless Steel, Double Braided construction, durable and corrosion resisting.

FUNCTION: Vibration and nose reduction, Convenient installation and extended exhaust noise elimination system life.

【Dimension】2.5 inch inlet diameter;3.5 inch outlet diameter;Overall Length:9.5 inch. Please check all the dimensions before purchasing in case of installation interference.

【Design】Weld On - Double Wall Slant Angle Cut

【Material】High Quality Mirror Polished T304 Stainless steel. Durable and Anti-corrosive,never Rusty.

[Premium Acoustic Control] EVIL ENERGY muffler is densely packed with excellent, sound-absorbing cotton, giving a low, deep tone that is reverberated to increase sound. Easy to install, bolts on in minutes.

[Size and Construction] This muffler is having 2" inlet, 3" exit, 15" length, polished stainless steel. Please measure your car's inlet before purchasing.

[Working Principle] A muffler is a device that is installed towards the end of a vehicle's exhaust system, work on the principle of destructive interference and absorption. The walls of the muffler are made of two layers of stainless steel, which help reduc vibration and absorb sound.

Dimension: standard 4" x 8" x 15"(inlet, outlet and overall length); ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (Notice: Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0" before purchase)

Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well; plus, a drainage hole helps drain water to prevent rust

Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated and polished finish would make your car tailpipe shine brightly

★FITMENT: Inside diameter inlet---4 Inch, Outside diameter outlet---8 Inch, Overall length---15 Inch

★MATERIAL: High qualified stainless steel material,durable and anti-corrosive. It will protect your original pipe from the sun and rain, avoid rusting and deformation.

★NOTE : It will fit 4inch outside diameter pipe, but will not fit 4 inch inside diameter pipe.

SIZE: 5 inch inlet, 10 inch outlet, 15 inch overall length,100% Brand New Exhaust Tip.

MATERIAL: Made by high quality stainless steel, black powder scrub surface, light weight, heat-resisting, anti-corrosion and degant appearance.

INSTALLATION STYLE: Clamp on design, Single Layer, Angled Cut 20 degree, Rolled Edge.

SIZE: 2.5" (2 1/2") ID,2.625"(2 5/8") OD, 16" overall length(total length including extension), 1 Piece of 100% Brand New Double Braided Flex Pipe

MATERIAL: Made by Stainless Steel, Double Braided construction, durable and corrosion resisting.

FUNCTION: Vibration and nose reduction, Convenient installation and extended exhaust noise elimination system life.

ID: 2.5" OD: 4" Length: 18" Angled Chrome

Weld On installation and Angled Cut design

Materials: Made of High quality Stainless steel has very strong anti-corrosive, Never Rusty. Please clean the exhaust tip regularly to expand its longevity.

🔹 SIZE: 5 inch inlet, 10 inch outlet, 18 inch overall lehgth,100% Brand New Exhaust Tip.

🔹 MATERIAL: Made by high quality stainless steel, polish stainless surface, light weight, heat-resisting, anti-corrosion and degant appearance.

🔹 INSTALLATION STYLE: Clamp on design, Single Layer, Angled Cut 20 degree, Rolled Edge.Note: If you think it isn’t tight enough, additional welding will be a nice safeguard.

SIZE: 2.5" (2 1/2") ID,2.625"(2 5/8") OD, 10 inch outer length(total length including extension), 1 Piece of 100% Brand New Double Braided Flex Pipe.

MATERIAL: Made by Stainless Steel, Double Braided construction, durable and corrosion resisting.

FUNCTION: Vibration and nose reduction, Convenient installation and extended exhaust noise elimination system life.

【Dimension】2.5 inch inlet diameter;4 inch outlet diameter;5 inch Overall Length

【Design】Weld On - Double Wall - Slant Angle Cut.

【Material】High quality stainless steel mirror polished. Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and deformation.

4" Inlet & 8 Outlet Universal Diesel Truck Exhaust Tip.

Surface Finished: Polished. Style: Angled Cut - Rolled Edge

Have a small hole on bottom of tip to drain water.

【Dimension】2.25 inch inlet diameter; 3.5 inch outlet diameter; 18 inch overall length.

【Design】Weld On - Single Wall - 45 Degree Angle Cut.

【Material】High quality T304 Mirror Polished Stainless steel.Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and deformation.

【Dimension】5 inch Inlet; 7 inch Outlet ; 15 inch Overall Length.

【Design】 Bolt On - Rolled Edge - 70 Degree Angle Cut.

【Material】High quality stainless steel mirror polished. Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and deformation.

【Dimension】2.5 inch inlet diameter;3.5 inch outlet diameter;Overall Length:9.5 inch Exhaust Tip.

【Design】Weld On - Double Wall Slant Angle Cut- Duo Outlets-Blue Burnt Tips.

【Material】The 2.5'' inlet dual exhaust tip is made of vacuum plating blue high quality Mirror Polished T304 Stainless steel. Durable and Anti-corrosive, never Rusty.

【Dimension】ID: 4" OD: 8" Length: 15" Angled Roll Bolt On Exhaust Tip

【Design】Bolt On installation and Angled Cut-Rolled Edge design

【Material】Made of High quality 304 Stainless steel has very strong anti-corrosive, Never Rusty

√ Inlet: 2.5" (63mm), Outlet: 3.5" (89mm), Total length: 9.5" (241mm), Width: 7" (178mm)

√ Features: Staggered, Duo Outlets, Blue Tips, Duo Layer, Slant Cut,Staggered

√ Universal fit for Most Vehicles With 2.5" Diameter Inlet Size Only (Note: Please Refer Dimension To Make Sure It Will Fit Before Purchasing)

U bend with 6" legs

Pipe gauge measures 18", tube diameter measures 2" and radius measures 3"

Package Dimensions: 16.8 " L x 15.9 " W x 5.4 " H

Deep aggressive to moderate exhaust note

Moderate interior resonance

Excellent performance on high horsepower vehicles