Best Pellethead in 2026

Fits Quadra-Fire Models: ~ Castile Freestanding ~ Castile Insert ~ Santa Fe Freestanding ~ Santa Fe Insert ~ Contour

Replaces Part # 812-4400

2500 RPM

New for 2021 is an adjustable heat baffle. This new feature allows precision control and distribution of heat helping to eliminate unwanted hot spots. Gone are the foldable legs which have been replaced by four sturdy legs.

Control and monitor your grill from your couch or on-the-go with GMG Smart Control. Adjust your smoke and grill temp from 150°F to 550°F with 5° increment control. Adjust and monitor your food temp from your phone with the GMG App. Grill smarter, eat better!

Kick your taste buds into a new dimension!

Specifically Designed for GMG Prime Grills

Keeps the AC Adapter and Cord Locked in Place

Prevent Accidental Powering Off of Your GMG Grill

The Davy Crockett has been upgraded to the NEW GMG TREK PRIME

Stauncher legs and an exterior heat shield adjustment rod.

OPTIONAL: Stainless steel Trek cart (sold Seperately)

MULTIPLE FITS - Works with England Stove Works, Summers Heat, and Timber Ridge; Ideal for Englander pellet stoves and multi-fuel models - Part Number: PU-047040

PLUG & PLAY - Comes fully assembled and installs in minutes; Replace your Auger feed motor in no time with the easy-connect wire leads; Works with top and bottom auger feed motors

READY TO ROTATE- Turns counter-clockwise facing the shaft at 1-RPM, 110-Volt, 1.03 Amps, with 12” wire lead connectors; Can be easily adjusted to turn clockwise

Fits PelPro Models: ~ PP60 ~ PP130 ~ PPC90 ~ TSC90

Replaces Part # 812-3381 | 812-4400

2500 RPM

Fits Englander Models: 10-CDV - 25-CB120 - 25-EP & 25-EPI (Evolution Pellet) - 25-IP (Imperial Pellet) - 25-PAF - 25-PAH (Pellet Auxiliary Heater) - 25-PDV - 25-PDVC - 25-PFS & 25-PFSP - 25-PI - 25-SSP01 - 55-SHP10 - 55-SHP20 - 55-SHP22 - 55-SHP25 - 55-SHPAH - 55-SHPCB120 - 55-SHPEP & 55-SHPEPI - 55-SHPIP - 55-SHSSP01 - 55-TRP20 - 55-TRP22 - 55-TRP25 - 55-TRPAH - 55-TRPCB120 - 55-TRPEP & 55-TRPEPI - 55-TRPIP - 55-TRSSP01

Complete Assembly with Housing and Docking Gasket.

3000 RPM, Clockwise Rotation. 120V AC, 60Hz.

Correct Burnpot Insert for A-S-BURNPOT & A-S-BURNPOTNI.

Fits Breckwell Models: P2000 Tahoe - P2000I Tahoe Insert - P22 Maverick - P23 Sonora - P24 Blazer - P2700 Mojave - P32I Cadet - SP1000 Big E

Fits US Stove Models: 5040

Replaces Part Numbers: 1014433, 1014529, 119290-00, J238-150-15251, 1013517

Furnace Flue Exhaust Motor. 1/35 HP, 115V, 1.5 Amp, Ball Bearing, 3000 Rpm, 1 Speed. Thermally Protected, Counter Clockwise Rotation When Facing Motor Shaft. 4" Outlet. Includes Mounting Gasket.

One Year Warranty

Fits Models: ~ Quadrafire 800 ~ Quadrafire 1000

1 RPM, Counter Clockwise Rotation (While facing shaft)

Exceeds all OEM & aftermarket motor standards

2speed, 115V, 1080/1675 RPM, 3.4 AMP

Replaces Part Numbers: D1092, 7184-0156, 7184-0432, 1468-306, 1468-3069, 7855MVA-A11U (8333 Series)

Sleeve Bearing Double Shaft Motor Replacement Motor

4" Heavy Duty Steel Brush

3' Rod included - Can be joined with other rods to create a longer length

Thicker Diameter Rod for a Better Cleaning

Made of sturdy material, it has the advantages of long service life, low noise, high vibration frequency, sufficient power, perfect fit, fairly easy installation and so on. Most importantly, warm and toasty this winter

PART NUMBERS: 812-4421, 812-4420, 7000-004, 12-1020, PH-4421

COMPATIBLE MODELS: Quadra-Fire CAB50-C, Castilee F/S, Castilee FS MBK, Classic-Bay 1200, Classic-Bay 1200i, Contourr, Mt-Vernon E2 FS, Mt-Vernon E2i, Santa Fe B, Santa Fe MBK, Santa Fe-C INS, Trekker Insert, PS35, PS50 etc.

Replaces Part Number SRV7000-531, SRV7000-166, 812-3430, 812-1990, SRV7000-447

Senses air flow/restriction within the firebox, exhaust chamber, vent pipe and fuel hopper on select models. If proper air flow/draft is not met this switch will trip and not allow the auger motor to operate. This is a safety sensor.

Senses air flow/restriction within the firebox, exhaust chamber, vent pipe and fuel hopper on select models. If proper air flow/draft is not met this switch will trip and not allow the auger motor to operate. This is a safety sensor.

Fits Quadra-Fire Gas ~Colbay ~Colbay Insert ~Colbay STV ~Hudson Bay ~QFP30 ~QFP40

Fits Quadra-Fire Pellet ~Castile Freestanding ~Castile Insert ~Contour ~Mt Vernon OE ~Santa Fe ~Santa Fe Insert

10' Length x 1" Wide x 1/2" Bulb Tadpole Style Gasket (Enough for 2 Replacements).

Part # 3310709.005 & 3310102.003

This Blade Measures at 10-1/2″ Diameter x 3″Thick in Addition to Having a 1/2 Inch “D” Shaped Hole.

Part is Compatible with B5 Models, So Be Sure to Check You Manual.

Fits Models: ~ XXV ~ XXV-TC (Ash Door)

3/8″ diameter bulb x 4′ length speciality fiberglass tadpole style gasket with self adhesive backing

Guaranteed Highest Quality & Highest Fire Rating Gasket Material.

Full Englander Combustion/Exhaust Fan Motor Replacement Kit

Includes New Fan Paddle, Premium Sealed Ball Bearing Motor

1 Year Warranty

Fits Enviro Pellet Models: ~ Empress FS ~ Empress FPI ~ Windsor Fits Enviro Gas Models: ~ Ascot ~ Accent 20 ~ Accent 25 ~ Bedford ~ Cara ~ DV36 ~ DV42 ~ DV50 ~ E20 ~ E30 ~ E33 ~ E44 ~ EX32 ~ EX35 ~ Focus DX (EG31) ~ Haven ~ Sienna ~ Sonnet ~ Retreat (door) ~ Westport

Part Numbers: ~ EG33-089 | EG22-089 | EGWP-089 | 50-634

PSA Style Tadpole Bulb Gasket with Peel-Off Adhesive Backing

Fits Models: ~ Eco-Choice PS35 ~ Eco-Choice PS50 ~ Eco-Choice CAB50

Replaces Part # 812-3381 | 812-4400

2500 RPM

Rated and Tested for up to 1200 Degrees Fahrenheit

Available in 12oz aerosols

Stove Bright High Temperature Paint is the industry’s premier high temperature paint.

Fits Quadra-Fire Models: 1200 Freestanding - 1200i Insert

Complete Assembly - Includes the Docking Gasket.

Top Quality Replacement for 812-3351

Fits Glowboy Models: Flat Top ~ Bayview ~ Step Top ~ Home Heater 120 ~ Home Heater 300 ~ Bayview Insert ~ PP300

Replaces Part # ACCBFNAS | KS-5020-1040

2500 RPM

Gift Card is affixed inside a tin

Gift amount may not be printed on Gift Cards

Gift Card has no fees and no expiration date

60% Cotton , 40% Polyester

Disney Winnie the Pooh infant boys pack of 5 cute and stylish short sleeve graphic creepers featuring lovable characters Pooh, Tigger, Eeyore and Piglet

Yellow bodysuit: Pooh with the words "Cute & cuddly"; Orange bodysuit: Tigger with the words "Feeling funny"; Blue bodysuit: Eeyore with the words "Lazy day"; Red bodysuit: all 4 characters with the words "100% huggable" White bodysuit: fun 100 Aker Wood theme all-over print

300 cards to seamlessly mix into your game.

This is an expansion pack for Cards Against Humanity. Buy that first.

Goes great with the Red Box and Green Box.

STAY ON FEET: Our 2-snap booties with nonslip grippers stay securely on feet and help new walkers grip slippery tile or hardwood floors. Whether your little one is kicking or crawling, these fleece booties won’t go missing like loose baby socks!

LUXURY MATERIALS: These infant booties wrap tiny feet in warm, comfy, soft cotton-blended fleece, making them winter baby essentials. Our gripper booties are durable and breathable and add an extra layer of protection on your baby’s precious skin.

THOUGHTFUL BABY-SHOWER GIFT: Shower an expecting or new parent with Zutano booties for their new bundle of joy. These soft, cozy fleece baby slippers will withstand the test of time and last through multiple children as they take safer first steps.

Smooth finish for superior printing results

65 pound cardstock

Acid and lingin free for great quality that doesn't deteriorate