Best Perfifan in 2026

Drive-In Style (Typically used on NON-EZ Lube Hubs) with 1.98" Outside Diameter

Fits for Trailer Axle Hub Dust Cover Grease Cap with 1.98" OD.

For 2000 lb to 3500 lb Axles Zinc coated EMMMSUN .

These are the reed valves as found in fits for Central Pneumatic Harbor Freight air compressors as well as Sears Craftsman E100229 and others.

You will receive (2) reed valves with your purchase.

They measure approximately 3/8" x 1 3/4"

Replace: for axle hub grease caps, Axles Dexter 85-1, 085-001-00, Tiedown Engineering 88174, and AL-KO 085-016-0

Compatible with: Dexter 21-31-1, Redline RG04-040, Tiedown Engineering 81168 & AL-KO 021-041-01

Features: Preserves Grease Life and Prevent's Impurities From Entering the System

Cast galvanized wheel hub kit for boat trailers

Kit includes pre-greased bearings, seals, dust caps, lug nuts and a cotter pin

5 UHI lugs on a 4.5" bolt pattern

Fit Type: Vehicle Specific

【WITH EXTRA 2 DUST CAPS & 4 SEALS】- Fits 3500lbs 1-1/16'' to 1-3/8'' Trailer Axles, Spindle #84, EZ-Lube Axle. You will receive 1 set of 5x4.5'' trailer hub and all the hardware parts you will need, you don't have to go anywhere else to buy parts. Our kit also comes with extra 1pc dust caps & 2pcs rubber plugs, can be used as spare parts in case of emergency. This is a value-for-money set!

【SIZE & COMPATIBLE WITH】- Trailer axle dust cap (O.D: 1.98''), L44649 outer bearings (I.D: 1-1/16''), L68149 inner bearings (I.D: 1-3/8''), Grease seals (2.56" O.D - 1.72" I.D), Lug nuts (1/2''-20 thread). Please check the size information and compatibility carefully before placing an order. Fits 1-1/16'' to 1-3/8'' spindles 3,500 pounds trailer.

【BOLT PATTERN】- 5 on 4.5'' bolt pattern idler hub with 1/2”-20 studs and bearing races installed.

1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.

Spindle includes spindle nut, spindle washer, and cotter pin.

4-4" BT8 hub pre raced and studded.

【WITH EXTRA 4 SEALS】- You will receive 4pcs 1.98 inches trailer axle covers & 4pcs extra rubber plug, enough to meet your daily use or replacement. The extra 4 rubber plugs can be used as spare parts in case of emergency. This is a value-for-money set!

【HEAVY DUTY & ANTI-RUST】- These trailers dust caps are made of high quality carbon steel and rubber, surface zinc-plated, strong and durable, not easy to deform, anti-corrosion & anti-rust, long-term service for your trailer.

【PRACTICAL TRAILER PARTS】- The trailer axle cap is designed to avoid the trailer axle from dust, preserve the grease, prevent axle corrosion and as decoration. Hub grease caps are designed with removable rubber plugs, easy to install and maintain.

5 studs 4.5" bolt circle (2 5/8" from center of one stud to the center of the next stud)

Contains TruRyde inner bearing, outer bearing, seal, solid grease cap and lug nuts.

Fits a #84 Spindle using L68149 inner and L44649 outer bearing.

GENUINE REPLACEMENT PART — Lippert helps you take the guesswork out of getting your trailer back on the road with exact-match replacement parts

MUTIPLE OPTIONS — Our trailer brake hubs are available in a variety of bolt patterns, axle ratings and sizes to fit your needs

DURABLE CONSTRUCTION — This industry-standard hub assembly is constructed from solid grey iron

1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.

Spindle includes spindle nut, spindle washer, and cotter pin.

5-4.5" BT8 hub pre raced and studded.

✔️ [Fitment] - Trailer Axle Hub Dust Cover Grease Cap with 1.98" OD.

✔️ [Trailer Type] - 2000 lbs to 3500 lbs Axles

✔️ [Features] - Long Lasting Durability

5 studs 5" bolt circle (3" from center of one stud to the center of the next stud)

Contains TruRydeinner bearing, outer bearing, seal, solid grease cap and lug nuts.

Fits a #84 Spindle using L68149 inner and L44649 outer bearing.

4 studs 4" bolt circle using L44649 inner and outer bearings.

Contains TruRyde inner bearing, outer bearing, seal, grease cap and lug nuts.

Fits a BT9 Spindle (1 1/16" OD). All studs are 1/2"-20 with yellow finished zinc plating.

【FIT】For trailer idler hub 5 on 5" for 3,500 lbs trailer axle.Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle.

【WELL PACKING 】The parts are individually packed in bubble bags.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box.

【LUXURY KIT WITH EXTRA ACCESSORIES】This trailer hub kit includes 32pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 2 DUST CAPS & 4 SEALS.

1.This tool helps you remove the hub assemblies quickly and safer without damaging the axle.

2.There are enough flange bolts in the package to meet your needs as much as possible.

3.Simple Operation:Find the flange nut that suits you, then fix the 8629 hub removal tool on the hub, and then hit the end of the tool with a hammer until the hub is loose, then you can easily remove the hub

4 studs 4" bolt circle using TruRyde L44643 inner and outer bearings.

Contains TruRyde inner bearing, outer bearing, seal, solid grease cap and lug nuts.

Fits a BT8 Spindle (1" OD)

Sufficient Wheel Replacements for You: you will receive 4 pieces of trailer hub caps with 4 pieces of rubber plugs, enough to meet your daily use or replacement, can be stored for a long term, and can be also shared with friends or relatives who have a trailer

Notable Size Details: our trailer axle grease cap measures about 1.98 inches in diameter, 1-7/16 inch high, and the rubber plug is about 1.5 x 1.5 x 0.2 inches, fit for 2,000 to 3,500 lb trailer wheel hubs

Quality Material Selection: our trailer bearing dust cap is made of iron, a galvanized surface, sturdy and tough, strong against breakage and deform, corrosion and rust, serving your trailer for a long time

【FIT】Fit most standard 2000 -3500 lb trailer wheel hub for both types of axles EZ Lube and standard. Fit standard brake & idler trailer axles for most 4 lug & 5 lug axles with 1.98" diameter cap.

【20 PIECES PACK】- Grease Plugs bulk, they are packed in a fine bag. Abundant quantity can meet various use and replacement requirements in your daily work, and you can also share them with others. Carry seals with the vehicle and replace them immediately when necessary.

【GOOD SEAL】- These grease cap rubber plugs are fine workmanship, soft touch and smooth surface, provide good seal and compatibility. Each seal is perfect for most 1.98" OD Dust / Grease Cap.

NOTE: This item is a compression fit item. Meaning the Item is designed to be larger than the hole it is going into. This is needed to prevent the bearing protector to stay in place while travelling down the highway

Protects wheel bearings from dirt, water and road grime

Fits 1.98-inch hub bore size

Drive-In Style (Typically used on NON-EZ Lube Hubs) with 1.98" Outside Diameter

Fits for Trailer Axle Hub Dust Cover Grease Cap with 1.98" OD.

For 2000 lb to 3500 lb Axles Zinc coated EMMMSUN .

1750 Lb 5 Bolt Hub Kit

Kit Includes (1) 5-Lug Hub (5) 1/2" Lug Nuts (1) Dust Cap

Fits Most Trailers With 3,500 Lb. Rated Axles

Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle

Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed

Kits also includ: 4x L44649 outer cone bearings, 2x Grease seals, 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2"-20 thread

BLACK RUBBER GREASE PLUG (10 Pack )

Hub Dust Caps for Dexter EZ Lube Trailer Camper Axle

Specs - Outside Diameter: 1.3" Inside Diameter: 0.97"

Set of 2 New trailer idler hub kits 6 on 5.5 for 5,200-6,000 lbs trailer axle

Bolt pattern: 6 on 5.5", bearing races and 1/2"-20 studs installed

Kits also includ: 2x 25580 inner cone bearings and 2x 15123 outer cone bearings, 2x Grease seals 2.25" x 3.371", 2x E Z lube grease caps with rubber plug; 12 cone wheel nuts 1/2"-20 thread

One-piece, marine-grade cast hub

Bearings and hub cavity are 100 percent pre-greased

Includes bearings, seals, dust caps, cotter pin, and lug nuts

2-Pack 4 studs 4" bolt circle using TruRyde L44643 inner and outer bearings.

Contains TruRyde inner bearing, outer bearing, seal, solid grease cap and lug nuts.

Fits a BT8 Spindle (1" OD)

6 studs 5.5" bolt circle using 25580 inner and 15123 outer bearing.

Contains TruRyde inner bearing, outer bearing, seal, grease cap and lug nuts.

Fits a #42 Spindle

Pair of 1" straight spindles includes castle nuts and cotter pins.

Bearings included - (4) L-44643 1" inside dimension.

Hubs have pre-installed pressed in races.