Best Phanteks in 2026

Equipped with Phanteks’ high airflow fabric for maximum cooling and dust filtration. Fully equipped with dust filters. Weight reinforced sound dampening panels to reduce noise

Removable Magnetic Silent panels. Removable Tempered Glass side panel. Better cable management with the dual Velcro ties.

PSU Bracket to help make installing and removing PSU easier. Included Air Flow Cover to prevent hot air from re-circulating. Support intensive water-cooling

Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks' new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port

Appearance: Brushed plastic with an aluminum appearance; Stealth interior: hidden PSU / hidden HDD

Cooling: Extreme cooling capacity; 2 included Phanteks' premium fans ; The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management

Optimal cooling performance with the ultra-fine performance mesh front panel and features a tempered Glass Side panel in a compact Mid-tower

Spacious open interior: supports up to E-ATX motherboard, 280/360mm radiator in front, vertical GPU mounting support (with PH-VGPUKT_02)

Integrated Digital-RGB controller with 3x pre-installed D-RGB fans that can sync with compatible motherboards to create a stunning lighting effect

Ultra-fine Performance Mesh front panel for the best optimal cooling performance; Tempered glass side panel to showcase your build

Spacious open interior: supports ATX motherboards, 280mm radiator in front, supports a vertical GPU bracket (optional PH-VGPUKT_0), and full-size power supplies

Easy accessibility to I/O featuring 2x USB 3.0, Microphone, Headphone, Power button, Reset button

Uncompromising quality using glass fiber reinforced LCP (Liquid Crystal Polymer) for the fan blades and fan frame.

Easy and accessible switch to change fan profiles for silent, balanced or extreme performance operation: Hybrid Mode (1200RPM), Performance Mode (2000RPM), Advanced Mode (3000RPM).

Smooth and powerful 3-Phase motor (6 poles) operates with a lower frequency response for excellent sound quality.

Ultra-fine Performance Mesh front panel for the best optimal cooling performance; Tempered glass side panel to showcase your build

Spacious open interior: supports dual system (with PH-ITXKT_R01), vertical GPU mounting support (with PH-VGPUKT_02), up to 420mm front/280mm top radiator

Easy accessibility to I/O featuring USB-C GEN2, 2x USB 3. 0, Microphone/Headphone, Power button

Brushed aluminum Look. Clean interior – hidden PSU& HDDs. Tempered glass panel

Easy accessibility to fans and dust filters. Equipped with Phanteks' Velcro cable ties. Optical Drive bay. Reservoir mounts and pump Slots

2 x USB 3.0 / USB-C GEN 2 / Mic / Headphone / Reset / RGB Switch Front Ports

Length: 19.68” (500mm). Construction AWG: 18AWG, Ø2.1mm (Rohs)

Sleeve Tube: PP Material. Conductive Resistance: 0.01 ΩMax

Connector: 24 (2x12) Pin/Male to 24 (2x12) Pin/Female. 4(2x2)+4(2x2)/Male to 8(2x4)Pin/Female. 2(2x1)+6(2x3)/Male to 8(2x4)Pin/Female

Length: 19.68” (500mm). Construction AWG: 18AWG, Ø2.1mm (Rohs)

Sleeve Tube: PP Material. Conductive Resistance: 0.01 ΩMax

Connector: 24 (2x12) Pin/Male to 24 (2x12) Pin/Female. 4(2x2)+4(2x2)/Male to 8(2x4)Pin/Female. 2(2x1)+6(2x3)/Male to 8(2x4)Pin/Female

package Dimensions: 6.4 cms (L) x 15.8 cms (W) x 22.6 cms (H)

Package Quantity: 1

Product Type: System Cabinet

Length: 19.68” (500mm). Construction AWG: 18AWG, Ø2.1mm (Rohs)

Sleeve Tube: PP Material. Conductive Resistance: 0.01 ΩMax

Connector: 24 (2x12) Pin/Male to 24 (2x12) Pin/Female. 4(2x2)+4(2x2)/Male to 8(2x4)Pin/Female. 2(2x1)+6(2x3)/Male to 8(2x4)Pin/Female

Length: 19.68” (500mm). Construction AWG: 18AWG, Ø2.1mm (Rohs)

Sleeve Tube: PP Material. Conductive Resistance: 0.01 ΩMax

Connector: 24 (2x12) Pin/Male to 24 (2x12) Pin/Female. 4(2x2)+4(2x2)/Male to 8(2x4)Pin/Female. 2(2x1)+6(2x3)/Male to 8(2x4)Pin/Female

Nine-blade design offers a higher airflow and quiet cooling solution for the best performance

PWM capabilities built-in to precisely control the speed to achieve optimized fan curve

Rigid frame design and included rubber dampeners helps to prevent vibration

Dual layer design for high stability and full PCI-e Gen4 x16 speeds

Individual laneway shielding to prevent external EMI/EFI and interference between channels

High-quality soldered contacts for better signal integrity

High Performance full tower capable of extreme workstation and dual system

Spacious open interior: supports up to SSI-EEB motherboard, dual 480 and dual 360 radiator support simultaneously, dual vertical GPU support, and dual system/psu support

Integrated Digital-RGB controller that can sync with compatible motherboards and Phanteks Digital-RGB products

Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks' new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port

Appearance: Brushed plastic with an aluminum appearance; Stealth interior: hidden PSU / hidden HDD

Cooling: Extreme cooling capacity; 2 included Phanteks' premium fans ; The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management

Nine-blade design offers a higher airflow and quiet cooling solution for the best performance

PWM capabilities built-in to precisely control the speed to achieve optimized fan curve

Rigid frame design and included rubber dampeners helps to prevent vibration

High Performance full tower capable of extreme workstation and dual system

Spacious open interior supports up to SSI-EEB motherboard, dual 480 and dual 360 radiator support simultaneously, dual vertical GPU support, and dual system/PSU support

Integrated Digital-RGB controller that can sync with compatible motherboards and Phanteks Digital-RGB products

Nine-blade design offers a higher airflow and quiet cooling solution for the best performance

PWM capabilities built-in to precisely control the speed to achieve optimized fan curve

Rigid frame design and included rubber dampeners helps to prevent vibration

High Performance full tower capable of extreme workstation and dual system

Spacious open interior supports up to SSI-EEB motherboard, dual 480 and dual 360 radiator support simultaneously, dual vertical GPU support, and dual system/PSU support

Extreme configuration for fans (up to 15x fan mounting location), water-cooling (dual 480 and dual 360 radiator support simultaneously), and storage (up to 12x HDDs or 11x SSDs)

Our Phanteks RGB LED strips are extremely bright and it is a great addition to any case.

Phanteks RGB LED strip has integrated magnets in the silicone housing allowing for easy installation to the metal chassis. For a really secure fit, our LED strip includes double-side 3M tape.

The strip is made of flexible PCB material and comes with a silicone housing which is more durable compared to others that uses Epoxy strips.

Our Phanteks RGB LED strips are extremely bright and are currently compatible with the Enthoo Luxe, Mini XL, Evolv ATX TG, and P400/P400S. M/B with 4pin RGB LED header (+12V, G,R,B) is compatible with PHANTEKS PH-LEDKT_COMBO.

Phanteks RGB LED strip has integrated magnets in the silicone housing allowing for easy installation to the metal chassis. For a really secure fit, our LED strip includes double-side 3M tape.

The strip is made of flexible PCB material and comes with a silicone housing which is more durable compared to others that uses Epoxy strips.

Asus Aura Ready

Compatible with upcoming motherboards with 4pin RGB Header

Allows you to synchronize your Phanteks cases with Multi-colors LED control (Luxe, Mini XL, P400..) and Phanteks Led strip to the motherboards software.

Premium Aluminum Frame. The Halos Lux is milled from one single block of aluminum and anodized in Satin Black. High density LED. Light is spread evenly thanks to high density LED's and diffuser

There is no compromise on performance. Even high quality fans made from PBT material, like Phanteks' MP and SP fans, can now be illuminated

Sync RGB lighting. Sync the RGB lighting with any RGB equipped Phanteks case and motherboard. Compatible with Aura Sync, Mystic light, RGB Fusion

Optimal cooling performance with the ultra-fine performance mesh front panel and features a tempered Glass Side panel in a compact Mid-tower

Spacious open interior: supports up to E-ATX motherboard, 280/360mm radiator in front, vertical GPU mounting support (with PH-VGPUKT_02)

Two pre-installed high-performance low noise fans with an integrated fan controller with 3-speed fan modes: low, medium, high

The PH-F200SP, a high static pressure fan, have the ability to overcome the airflow restriction caused by high fin density.. Air flow - 110.1 CFM. Noise level - 25.0 decibels

The PH-F200SP has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational stability. To create better structural strength, Phanteks redesigned the back frame of the PH-F200SP.

With the noise reduction challenges in mind, we modified the component for lower actuator noise, PCBA for lower electromagnetic noise, brushless motor structure for lower operating noise and frame rib for lower wind and vibration noise.

Material: metal. Chassis support: Phanteks chassis - Evolv x/ future models

Application: 3.5” HDD/ 2.5” SSD

Stackable: Yes. Color: black

Aluminum body (3mm). Clean interior – Hidden PSU/HDD/Cables. RGB LED illumination. Dual Tempered Glass Panels

Magnetic Tempered Glass Panels on hinges. Quick release panels for easy access. Removable dust filters. Long GPU support (up to 319mm/12.5in)

Phanteks Premium fans 140mm. 26mm cable management space + additional cable compartment in bottom. Support Synchronization with RGB Motherboards and Phanteks RGB products

Clean and elegant design that can be recognized by the refined aluminum front and top panels. Controllable LED lighting (LED strip and Fan LED). polished chamfers that subtly accentuate the intake and exhaust areas.

Stealth interior: hidden PSU / hidden HDD / hidden cables and grommets (modular cable cover). Extreme cooling capacity, providing up to 16 different fan mount locations (120mm / 140mm). 5 included Phanteks' premium fans PH-F140SP. Innovative liquid cooling mounting systems: radiator brackets for easy installation (bottom and side), cable cover can be transformed into a reservoir bracket with pre-drilled mounting holes and a universal pump bracket with vibration dampening function.

The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management. Dual repositionable and removable HDD cages (support up to 6 HDD's) for more Installation flexibility or unrestricted airflow. Closed HDD panel Strengthens the chassis' Rigidity, even when both HDD cages are removed.

The Halos Lux is milled from one single block of aluminum and anodized in Satin Black.

There is no compromise on performance. Even high quality fans made from PBT material, like Phanteks’ MP and SP fans, can now be illuminated.

Light is spread evenly thanks to high density Digital LED’s and diffuser. Daisy chain all of Phanteks’ Digital RGB products together.