Best Pickupzone in 2026

FITMENT ATTENTION- The filp tonneau cover Fits 2019 - 2022 Dodge Ram 1500 New Body Style | Does Not Fit w/ Multi-Function (Split) Tailgate 5' 7" Bed (67.4")

100% BED ACCESS - The flip folding truck bed tonneau cover can be folded completely upright against the cab to provide access to 100% of your truck bed. Folded upright in the open position allowing you to haul cargo safely without having to remove the truck bed cover.

LUXURIOUS OUTLOOK - PICKUPZONE truck bed cover features stylish fiberglass panels, protecting against marks, scratches and UV damage. Low profile design, flush mount, nice appearance. 5 panel design could saving cargo space.

FITMENT: Our truck bed tonneau cover fits for 5.5' 2015 2016 2017 2018 2019 2020 2021 2022 2023 F-150. Not fit for the track system( need to remove before installation）

EASY TO INSTALL - Required no drilling.The directions are simple to follow, easy to install with one person. Super easy to adjust and operate. Simply fold from front and back, then lift up and off to gain full use of truck bed, the whole cover comes completely put together.

FIBERGLASS MATERIAL: PICKUPZONE tonneau cover is made of fiberglass panels, which is more scratch resistant and stronger than aluminum alloy and is a great mix of strength, security and ease of use. Relatively light, but can withstand 2 tons, all the panels lock down into the rail so it should keep everything nice and secure.

FITMENT: Our truck bed tonneau cover fits for 2016-2023 Toyota Tacoma (Does Not Fit Trail Special Edition with Storage Boxes) | Fleetside 5' Bed( need to remove before installation）

EASY TO INSTALL: No drilling required. Super easy to adjust and install. And this cover has automatic-latching panels that release with pull cables on either side of the truck and it folds into an upright position with dual prop rods, without resting on the back of the cab.

WATERPROOF RESISTANCE: The cover has a weather strip installed all the way around so it will not scratch your truck and has a good seal. The hard folding truck bed cover has the rigid rear seal, which actually stands up much better than the soft one from the other designs.

𝗙𝗜𝗧𝗠𝗘𝗡𝗧：Fits 2019 - 2023 Dodge Ram 1500 w/o RamBox, Does Not Fit w/ Multi-Function (Split) Tailgate Does not work with split tailgate 5' 7" Bed (67.4")

𝗧𝗢𝗣 𝗦𝗘𝗖𝗨𝗥𝗜𝗧𝗬 - All the panels lock down into the rail so it should keep everything nice and secure. Tonneau cover has durable fiberglass panels that automatically latch as the cover is partially or fully closed, and is fully locked once your tailgate is closed.

𝗚𝗢𝗢𝗗 𝗦𝗘𝗔𝗟𝗜𝗡𝗚 - Good waterproof effect and keep the bed relatively dry even with heavy rain. Our truck bed cover has the rigid rear seal, which actually stands up much better than the soft one from the other designs. One-piece waterproof rubber strip, with good integrity and aesthetics, and greatly improved sealing and waterproof properties.

FITMENT: Our truck bed tonneau cover fits for 5.8ft (69.3in) 2007-2023 Silverado Sierra 1500 truck bed. NOT For Models With CarbonPro Bed & Factory Utility Track Sys. & Roll Bar.【Please remove the grab bar for 2021 model. And if you experience any installation issue which is caused by the bed liner, please contact us for the solution.】

EASY TO INSTALL - Required no drilling.The directions are simple to follow, easy to install with one person. Super easy to adjust and operate. Simply fold from front and back, then lift up and off to gain full use of truck bed, the whole cover comes completely put together.

FIBERGLASS MATERIAL: PICKUPZONE tonneau cover is made of fiberglass panels, which is more scratch resistant and stronger than aluminum alloy and is a great mix of strength, security and ease of use. Relatively light, but can withstand 2 tons, all the panels lock down into the rail so it should keep everything nice and secure.

FITMENT: Our truck bed tonneau cover fits for 5.5' 2007-2023 Tundra truck bed.Not fit for the track system( need to remove before installation）

EASY TO INSTALL - Required no drilling.The directions are simple to follow, easy to install with one person. Super easy to adjust and operate. Simply fold from front and back, then lift up and off to gain full use of truck bed, the whole cover comes completely put together.

FIBERGLASS MATERIAL: PICKUPZONE tonneau cover is made of fiberglass panels, which is more scratch resistant and stronger than aluminum alloy and is a great mix of strength, security and ease of use. Relatively light, but can withstand 2 tons, all the panels lock down into the rail so it should keep everything nice and secure.

FITMENT: Our truck bed tonneau cover fits for 5.5' 2004-2014 F-150/2006-2014 Lincoln Mark LT. Not fit for the track system( need to remove before installation）

EASY TO INSTALL - Required no drilling.The directions are simple to follow, easy to install with one person. Super easy to adjust and operate. Simply fold from front and back, then lift up and off to gain full use of truck bed, the whole cover comes completely put together.

FIBERGLASS AND PP HONEYCOMB MATERIAL: PICKUPZONE tonneau cover is made of fiberglass and PP Honeycomb, hardness of FRP ≧ 30HBa, Compressive Strength of PP Honeycomb ≧ 1.4MPa, can withstand 2 tons, which is more scratch resistant and stronger than aluminum alloy.

FITMENT - Compatible with 2015-2020 Ford F-150 | 5.5' (67") Bed

DESIGN - US patented. Made from aircraft-grade alloy aluminum panels sandwiching thick PC polymers arranged in strong honeycomb structure for maximum protection, with an even weight distribution capacity of up to 500 LB. Cover is supported by heavy-duty aluminum frames, and the hardware provided is made out of tough glass-filled nylon structures and stainless steel for great durability.

FEATURES - Unit is pre-assembled with unique quick-release clamping system for easy no-drilling installation while offering maximum security against theft; and also providing a weather tight seal to protect your cargo from moisture and dirt.

FITMENT - Compatible with 2015-2020 Ford F-150 | 5.5' (67") Bed

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with aircraft-grade aluminum frames, and comes with stainless steel clamps for easy installation and great durability.

FEATURES - Pre-assembled horizontal crossbars offer support and conveniently fold up with the cover providing full bed access when needed.

FITMENT - Compatible with 2009-2014 Ford F-150 | Fleetside (Not for Stepside) | 6.5' (79") Bed

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with built-in horizontal crossbars that offer support when the cover is laid flat; and roll up with the tarp to provide full bed access when in need. Also comes with aircraft-grade aluminum side rails, and stainless steel clamps for mounting to the truck bed.

FEATURES - Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Tension system is available and can be adjusted on the end of the side rails to keep the cover tight and vinyl wrinkle-free in any weather conditions.

FITMENT - Compatible with 2004-2008 Ford F-150; 2005-2008 Lincoln Mark LT | Fleetside (Not for Stepside) | 5.5' (67") Bed

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with aircraft-grade aluminum frames, and comes with stainless steel clamps for easy installation and great durability.

FEATURES - Pre-assembled horizontal crossbars offer support and conveniently fold up with the cover providing full bed access when needed.

FITMENT - Compatible with 2009-2014 Ford F-150 | Fleetside (Not for Stepside) | 5.5' (67") Bed

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with built-in horizontal crossbars that offer support when the cover is laid flat; and roll up with the tarp to provide full bed access when in need. Also comes with aircraft-grade aluminum side rails, and stainless steel clamps for mounting to the truck bed.

FEATURES - Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Tension system is available and can be adjusted on the end of the side rails to keep the cover tight and vinyl wrinkle-free in any weather conditions.

FITMENT - Compatible with 2004-2008 Ford F-150; 2005-2008 Lincoln Mark LT | Fleetside (Not for Stepside) | 5.5' (67") Bed

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with built-in horizontal crossbars that offer support when the cover is laid flat; and roll up with the tarp to provide full bed access when in need. Also comes with aircraft-grade aluminum side rails, and stainless steel clamps for mounting to the truck bed.

FEATURES - Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Tension system is available and can be adjusted on the end of the side rails to keep the cover tight and vinyl wrinkle-free in any weather conditions.

FITMENT - Compatible with 2015-2023 Ford F-150 | 6.5' (79") Bed

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with built-in horizontal crossbars that offer support when the cover is laid flat; and roll up with the tarp to provide full bed access when in need. Also comes with aircraft-grade aluminum side rails, and stainless steel clamps for mounting to the truck bed.

FEATURES - Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Tension system is available and can be adjusted on the end of the side rails to keep the cover tight and vinyl wrinkle-free in any weather conditions.

Cover appears a little short : Make sure side rails are positioned properly, not too far from the tailgate, Move the whole cover assembly towards the tailgate, while making sure it's properly sealed at the front. Some species truck models have lower front bed rail. Apply front seal strip provided to the front bed rail to seal the gap

Comes with dual coated 24oz marine grade vinyl top, heavy duty aluminum powder coated side rails and clamps. Built-in horizontal crossbars offer support when cover is lying flat and roll up with the cover providing full bed access.

Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Also comes with adjustable tension system on the end of the side rails to keep the cover tight and wrinkle free.

FITMENT - Compatible with 2015-2023 Ford F-150 | 6.5' (79") Bed

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with aircraft-grade aluminum frames, and comes with stainless steel clamps for easy installation and great durability.

FEATURES - Pre-assembled horizontal crossbars offer support and conveniently fold up with the cover providing full bed access when needed.

FITMENT - Compatible with 2004-2012 Chevy Colorado / GMC Canyon; 2006-2008 Isuzu I280 | Fleetside (Not for Stepside) | 6'1" (73") Bed

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with aircraft-grade aluminum frames, and comes with stainless steel clamps for easy installation and great durability.

FEATURES - Pre-assembled horizontal crossbars offer support and conveniently fold up with the cover providing full bed access when needed.

FITMENT : Truck Bed: Fleetside; Bed Length: 5 feet ;2015-2019 Chevrolet Colorado / GMC Canyon; Please measure your truck bed length and make sure you have the correct model before ordering ; Cab size does not matter as long as you have the correct model and bed size . Package dimensions - W29 x H4 x L64 (dimensions are in inches )

Made of dual coated 24oz marine grade vinyl, heavy duty aluminum powder coated frames, and comes with stainless steel clamps for easy installation and great durability.

Pre-assembled horizontal crossbars offer support and conveniently fold up with the cover providing full bed access.

FITMENT - Compatible with 2014-2018 Chevy Silverado / GMC Sierra 1500; 2015-2019 2500 HD 3500 HD (2019 LD/Limited) | 6'7" (79") Bed | Equipping the cover will interfere with power tailgate

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with aircraft-grade aluminum frames, and comes with stainless steel clamps for easy installation and great durability.

FEATURES - Pre-assembled horizontal crossbars offer support and conveniently fold up with the cover providing full bed access when needed.

FITMENT - Compatible with 2004-2012 Chevy Colorado / GMC Canyon; 2006-2008 Isuzu I280 | Fleetside (Not for Stepside) | 6'1" (73") Bed

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with built-in horizontal crossbars that offer support when the cover is laid flat; and roll up with the tarp to provide full bed access when in need. Also comes with aircraft-grade aluminum side rails, and stainless steel clamps for mounting to the truck bed.

FEATURES - Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Tension system is available and can be adjusted on the end of the side rails to keep the cover tight and vinyl wrinkle-free in any weather conditions.

Patented Design Gives Your Truck a Great Custom Look & Texture Matches Your Truck

Custom Color ASA Plastic Matches Bed & Provides UV Protection for Fading & Cracking

Fits Flush - Perfect for Bed Covers that Don't Cover the Hole (Other brands are NOT Flush)

FITMENT - Compatible with 2015-2018 Chevy Colorado / GMC Canyon | 6'2" (74") Bed

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with built-in horizontal crossbars that offer support when the cover is laid flat; and roll up with the tarp to provide full bed access when in need. Also comes with aircraft-grade aluminum side rails, and stainless steel clamps for mounting to the truck bed.

FEATURES - Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Tension system is available and can be adjusted on the end of the side rails to keep the cover tight and vinyl wrinkle-free in any weather conditions.

FITMENT - Compatible with 2004-2012 Chevy Colorado / GMC Canyon; 2006-2008 Isuzu I350 | Fleetside (Not for Stepside) | 5'1" (61") Bed

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with aircraft-grade aluminum frames, and comes with stainless steel clamps for easy installation and great durability.

FEATURES - Pre-assembled horizontal crossbars offer support and conveniently fold up with the cover providing full bed access when needed.

CAUTION: Some 2019 Silverado models are still the same as 2018. See pictures to check hole size.

Patented Design Gives Your Truck a Great Custom Look

Custom Color ASA Plastic Matches Bed

FITMENT - Compatible with 2019-2022 Chevy Colorado / GMC Canyon | 5'2" (62") Bed | Equipping the cover will interfere with power tailgate

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with built-in horizontal crossbars that offer support when the cover is laid flat; and roll up with the tarp to provide full bed access when in need. Also comes with aircraft-grade aluminum side rails, and stainless steel clamps for mounting to the truck bed.

FEATURES - Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Tension system is available and can be adjusted on the end of the side rails to keep the cover tight and vinyl wrinkle-free in any weather conditions.

FITMENT - Compatible with 2020-2022 Jeep Gladiator JT | 5' (60") Bed

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with built-in horizontal crossbars that offer support when the cover is laid flat; and roll up with the tarp to provide full bed access when in need. Also comes with aircraft-grade aluminum side rails, and stainless steel clamps for mounting to the truck bed.

FEATURES - Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Tension system is available and can be adjusted on the end of the side rails to keep the cover tight and vinyl wrinkle-free in any weather conditions.

Fits 2015 - 2022 Ford F-150 5' 7" Bed (67.1")

PREMIUM & MATTE BLACK | This hard roll-up cover is topped with high-end material that delivers a stylish overall finish to TruXedo's signature low profile design. This premium material is dirt resistant and proven to stay clean for longer

SIGNIFICANTLY SECURE | Sentry CT is constructed with heavy-duty aluminum slats for utmost strength and truck bed protection. A supplementary security latch is located at the center of the truck bed cover for peace of mind on your cargo safety

FITMENT - Compatible with 2005-2021 Nissan Frontier; 2009-2012 Suzuki Equator | 5' (59") Bed | Fit models with or without Utility Track System

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with built-in horizontal crossbars that offer support when the cover is laid flat; and roll up with the tarp to provide full bed access when in need. Also comes with aircraft-grade aluminum side rails, and stainless steel clamps for mounting to the truck bed.

FEATURES - Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Tension system is available and can be adjusted on the end of the side rails to keep the cover tight and vinyl wrinkle-free in any weather conditions.

Fits 2009 - 2018, 2019 - 2020 Classic Dodge Ram 1500/2500/3500 5' 7" Bed (67.4")

FAST & EASY NO-TOOL INSTALL | The Gator ETX Tri-Fold can be installed in about 10 minutes by simply clamping the rails on without the use of a drill, providing quick, convenient cargo protection.

ELIMINATE THE ELEMENTS | This cover’s heavy-duty aluminum frame, industrial-strength vinyl and superior perimeter sealing keep rain, snow and dust out of the bed of your truck bed and protect your cargo in any weather condition.

FITMENT - Compatible with 1988-2006 Chevy Silverado / GMC Sierra C/K Pickup 1500 2500 HD 3500 HD; 2007 Classic | Fleetside (Not for Stepside) | 6'6" (78") Bed

DESIGN - US patented. Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with built-in horizontal crossbars that offer support when the cover is laid flat; and roll up with the tarp to provide full bed access when in need. Also comes with aircraft-grade aluminum side rails, and stainless steel clamps for mounting to the truck bed.

FEATURES - Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Tension system is available and can be adjusted on the end of the side rails to keep the cover tight and vinyl wrinkle-free in any weather conditions.