Best Pilida in 2026

STRONG & DURABLE: The 17mm ratcheting wrench forged by quality chromium-vanadium steel and heat-treated for enhanced strength and durability. The gear wrench High-polish and chrome plated for rust and corrosion resistance. Always keep surfaces clean.

Gear Head Design: Easy rotationDon't need to pull out after a turn. Convenient to use and improve work efficiency

12-Point & 72-tooth: ratchet wrench comes with 12-pointed box end wrench provides a more precise and exact fit. Better leverage. 5° working swing helps to operate at these confined areas.

Fuel Hose kit includes fuel tube and aluminum alloy fitting adapter: 6pcs 6AN straight hose end, 2pcs 6AN 45 Degree hose end, 2pcs 6AN to 1/4"NPT hose adapter fitting, 2pcs 6AN to 3/8" hose adapter fitting, 1pc 6AN to 5/16" hose adapter fitting, 1 pc AN6 to 3/8" quick disconnect male and 25Ft 6AN NBR fuel line.(Included clamps)

Make Life Easy: The Fuel Injection Hose are easily enough here to run all the way from your fuel tank to the engine. Mostly used in LS and EfI system, can be worked with petrol, diesel, oil, hydraulic fluid, fuel. Used this on a LS swap, make it easier for the plumbing of fuel system

Excellent Stability: The 3/8 Fuel Hose made of Premium Quality NBR Rubber; The hose end AN fittings is made of high strength Aluminum , polished and anodized surface provide the bright appearance, corrosion protection and strong strength. All the fittings feature a reusable spin-lock connector

▶ Make Work Easier: The Oval shape beam of 8mm wrench ratchet improved comfort, our ratcheting flex wrenches pivots 180°to easily get around obstructions

▶Open & Ended Design: 8mm ratcheting comes with 72-tooth ratchet box end needs only a 5° working swing arc to operate it. Helps to accelerate your operation at these confined areas

▶ Premium Quality: 8mm flex head ratcheting wrench was used forged and heat-treated chrome vanadium steel for lasting strength and extra durability. Each wrench is tested strictly against industry standards for hardness, torque and surface

▶Extra Long Wrench-- The ratcheting flex wrenches was design up to 70% longer handles for more torque, ratcheting flex wrenches pivots 180°to easily get around obstructions, perfect for hard to reach workspaces

▶ Double Box Design: 72-tooth ratchet box end wrench includes 8mm & 9mm ratcheting wrench. 5° working swing arc to operate it, helpfully to accelerate your operation at these confined areas

▶ 12-Point & Off-Corner: 8mm 9mm combination wrench comes with 12-pointed box end provides a more precise and exact fit. Better leverage performance and makes your job easier to loosen stubborn or rusted bolts and nuts

▶ Ideal for facet fuel pumps to control the fuel pressure to the carburetor

▶ High-quality zinc alloy construction anti-corrosion performance, super longevity

▶ Has 5 gears adjustable range via a numbered dial on top. Come with 1/4", 5/16",3/8" fuel connector

STRONG & DURABLE: The 13mm ratcheting wrench forged by quality chromium-vanadium steel and heat-treated for enhanced strength and durability. The gear wrench High-polish and chrome plated for rust and corrosion resistance. Always keep surfaces clean.

Gear Head Design: Easy rotationDon't need to pull out after a turn. Convenient to use and improve work efficiency

12-Point & 72-tooth: ratchet wrench comes with 12-pointed box end wrench provides a more precise and exact fit. Better leverage. 5° working swing helps to operate at these confined areas.

STRONG & DURABLE: The 18mm ratcheting wrench forged by quality chromium-vanadium steel and heat-treated for enhanced strength and durability. The gear wrench High-polish and chrome plated for rust and corrosion resistance. Always keep surfaces clean.

Gear Head Design: Easy rotationDon't need to pull out after a turn. Convenient to use and improve work efficiency

12-Point & 72-tooth: ratchet wrench comes with 12-pointed box end wrench provides a more precise and exact fit. Better leverage. 5° working swing helps to operate at these confined areas.

【 Premium Material】: T7 Aluminum Alloy & Nylon & PTFE Teflon fuel line has excellent corrosion resistance. Polished and anodized surface provide the bright appearance, corrosion protection and strong strength. It is maintenance free and precision engineered to increase life

【Braided Gas Lne Diameter】6an fuel line inner 5/16 inch, outside diameter: 0.43inch. Please measure before purchase

【Working Temperature】6AN ptfe fuel line withstands operating Temperatures from-76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure: 3000 PSI. Can work in environments with large temperature differences

STRONG & DURABLE: The 22mm ratcheting wrench forged by quality chromium-vanadium steel and heat-treated for enhanced strength and durability. The gear wrench High-polish and chrome plated for rust and corrosion resistance. Always keep surfaces clean.

Gear Head Design: Easy rotationDon't need to pull out after a turn. Convenient to use and improve work efficiency

12-Point & 72-tooth: ratchet wrench comes with 12-pointed box end wrench provides a more precise and exact fit. Better leverage. 5° working swing helps to operate at these confined areas.

PREMIUM - Precisely machined HEX & Torx sizes. Crafted and Designed with superior materials for increased torque and unmatched hardness.

DURABLE - Industrial grade, heat treated S2 alloy steel will increase turning power. Heavy-duty, will outperform the regular cr-v or common carbon materials.

LONGEVITY - Manganese Phosphate coating for rust and corrosion protection. Plus, the chamfered edges and ball end design will provide up to 25-degree angle entry.

950 SPKL/9 SM N SB LONG ARM HEX KEY SET

950 SPKL/9 SM N SB LONG ARM HEX KEY SET

950 SPKL/9 SM N SB LONG ARM HEX KEY SET

Removable Power Tools Accessory Case

Quick Release, 72 Tooth Ratchet for high torque ratcheting

Durable anti-slip vinyl grip bit driver with maximum comfort.

PRECISE - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.

DURABLE - Reinforced ratchet gear head constructed from hardened, heat-treated Chrome Vanadium alloy steel.

LONGEVITY - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.

Includes 15-pc. combination wrenches: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 mm; Wrench holder

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

measurement_system

Extremely robust and durable

Suitable for 1/4" hex bits under DIN 3126-C 6,3 and E 6,3, ISO 1173 and Wera series 1 and 4, Wera Adaptor 870/1 for 1/4" sockets

Includes 15-pc. combination wrenches: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in.; Roll-up storage pouch

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

Applications of this adjusting tool include Ducati 1098, 1198, Streetfighter-1098, Multistrada 1200, Monster 1200, 1199, Diavel and all other Single Sided Large Axle Swingarms

Use alone or with a 3/8"D wrench for the adjustment of the drive chain on motorcycles fitted with single sided swinging arms

Alternative to 88713.1038 or 887131038. Manufactured precisely to fit the eccentric spanner nut

CORROSION RESISTANCE: Full Polish Chrome Finish

QUICK ENGAGEMENT: 12 Point Box End with fastener

ADDITIONAL KNUCKLE CLEARANCE: 15° Box End Offset

Set Includes: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8"

Individually tested to 10,000 volts AC and rated to 1,000 volts AC for safety and peace of mind

Black oxide finish for corrosion protection

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off

72-tooth ratcheting box end needs a minimal 5° to move fasteners vs. 30° for standard wrenches

Flush mounted reversing lever allows you to change direction without removing the wrench

Off-corner loading design on box end provides better grip and reduces fastener rounding

LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.

CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.

RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.

Short length and a slim body make it easy to operate in areas with limited room

Open end is angled 15 degrees so it can flip over and engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

PATENTED DESIGN: Patented open-ended head allows easy access to connectors, nuts, and bolts

PRECISION TORQUE: Ratcheting box-end has 12 points of contact to provide maximum torque

CONVENIENT FUNCTIONS: Belt loop hole for convenient storage and transportation

Includes 8-pc. stubby combination wrenches: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in.; Wrench holder

Short length and a slim body make it easy to operate in areas with limited room

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off

15° offset for better access in tight spaces

Off-corner loading design on box end provides better grip and reduces fastener rounding

Long pattern beam length for improved reach, leverage and torque

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off

Compact reversing lever - no need to remove from fastener to change direction

Surface Drive design nearly eliminates fastener rounding

15% off-set provides additional knuckle clearance