Best Pirate Mfg in 2026

Our 4" Round Stainless Steel Mirror Head Is Highly Polished

Triple Chrome Plated Mirror Arm

Simple To Install, Our Peep Mirrors Come With Everthing You need. Fits up to 3/16" Drip Rail.

Hot Rod Chrome Aluminum 90 Degree Intake Manifold Vacuum Tee 3/8" NPT (National Pipe Thread)

Made from aluminum then polished and triple chrome plated

Fits all 3/8" NPT (National Pipe Thread) Intake manifolds, 3/8" Hose Barb on one side 1/4" Hose Barb on the other

Kit includes: (1) New Chrome Saginaw "Key-Way" Power Steering Pump, (1) Chrome Steel Pump Bracket Kit, (1) Chrome Groove Pump Pulley(5-3/4" diameter), (1) Chrome Power Steering Pump Cap

1975 and later vehicles will require a new hose to go from a metric o-ring style to the 5/8" Inverted flare

A different bracket must be used if your alternator is mounted over the exhaust manifold towards the outside of the head.

Anodized Billet Aluminum Fuel Pressure Regulator

(1) 3/8" NPT inlet and (2) 3/8" NPT outlet ports with (1) 3/8" NPT included

(1) 1/8" NPT port on the face for easy installation of the included pressure gauge

Brand New Black Steel Pulley kit

This kit will work on all Small Block Chevy Motors With a "SHORT" water pump

This Water pump pulley is 6.40" diameter and is 2-3/4" Deep Measuring From Front To Back

Hot Rod Polished Billet Aluminum PCV & Valve Cover Breather Kit W/ Grommet

This breather and PCV will fit all 1-1/4 Inch valve cover openings. Will not fit factory valve covers with 3/4 Inch openings

Included grommets reduce to accept 7/8 Inch stem

Brand new polished billet aluminum round 16 LB radiator cap

These are 2-7/8" total diameter

These caps will fit most original radiators as well as all aftermarket aluminum radiators

Hot Rod Polished Billet Aluminum Valve Cover Breather Kit W/ Grommet SBC BBC V8

This Round breather and PCV will fit all 1-1/4 Inch valve cover openings. Will not fit factory valve covers with 3/4 Inch openings

Included grommets reduce to accept 7/8 Inch stem

Hot Rod Black Billet Aluminum PCV & Valve Cover Breather Kit W/ Grommet

This breather and PCV will fit all 1-1/4 Inch valve cover openings. Will not fit factory valve covers with 3/4 Inch openings

Included grommets reduce to accept 7/8 Inch stem

STOCK STYLE PUSH ROD TUBES KIT

Replacement quality stock style push rod tubes. Ideal for stock engine builds and rebuilds.

Fits all 1300 - 1600cc. Type 1 & 2 1963-1971

Hot Rod Oval Finned Polished Valve Cover Breather Kit W/ Grommet SBC BBC V8

This breather Kit will fit all 1-1/4 Inch valve cover openings. Will not fit factory valve covers with 3/4 Inch openings

Included grommets reduce to accept 7/8 Inch stem

Hot Rod Black Billet Aluminum Valve Cover Breather Kit W/ Grommet SBC BBC V8

This breather kit will fit all 1-1/4 Inch valve cover openings. Will not fit factory valve covers with 3/4 Inch openings

Included grommets reduce to accept 7/8 Inch stem

Compatible with GMC Many 2003-15 Truck Models with Original Steel Wheel Hubcap

Compatible with Chevy Many 2003-15 Truck Models with Original Steel Wheel Hubcap

Fits 7/8" Lug Nuts With Flange Without Hub Caps

Braided Stainless Steel & Aluminum Fuel Line

Fits Holley 4150 & 4160 Style Carburetors with 7/8" - 20 Fuel Bowl Fitting

Fits Holley Carbs With 8-21/32" to 9-5/16" Center To Center

Brand New Chrome Aluminum 90 Degree 3/4" Heater Hose Fitting

Made from aluminum then polished and triple chrome plated

Fits all 1/2" NPT Intake Or Water Pump Outlets, 3/4" Hose Barb

Brand new black radiator support panel

This panel fits 1968-73 Chevelle and 1968-79 Nova models with standard radiators

Measures 24 X 5-1/4 Inches

Chrome Saginaw Style Power Steering Pump Bolt On Pulley A-Can Style

Compatible with Chevy Early style 1965-79 pump with threaded and 5/8 keyed shaft

Pump has a 3/8" hose barb for return line

48" Blue Stainless Steel Flexible Radiator Hose Kit w/ Blue Coated Dress End Caps

Kit includes: (1) 48" Stainless Steel Hose - 1 3/4" O.D., (4) Blue Aluminum Cap Covers, (4) Rubber Hose Sleeve Adapters - 1 3/4" I.D., (4) 1 1/4" I.D. Rubber Reducers, (4) 1 1/2" I.D. Rubber Reducers, (8) Hose Clamps

The Hose Can Be Cut To Desired Length.

A pair of chrome push in valve cover breathers with matching grommets.

This Breather Cap is thick gauge steel with chrome steel finish and a 1" diameter stem size

Works great with most chrome steel or aluminum valve covers

Red And Blue Anodized Billet Aluminum Fuel Log For Holley Style Carbs

Fits Holley 4150 Style Carburetors with 7/8" - 20 Fuel Bowl Fitting

Fits Holley Carbs With 9-5/16" Center To Center

Flat mounting surface for easy and universal installation

Kit Contains: (2) Custom Red Glass lens, Red 7 LED Light, Polished Stainless Steel Bezel, Housing, Black Rubber Mounting Pad, (4) Mounting Nuts

LED / Voltage: 7 LEDs / 12V

New Chrome Black Face 1.5" Mechanical 0-15 PSI Gauge

Standard 1/8" NPT

Perfect for your Rat Rod, Hot Rod, Muscle Car, or Custom Car project

(2) 44" Stainless Steel Hoses - 3/4" O.D.

(4) Black Aluminum End Cap Covers

(4) Rubber Hose Sleeve Adapters 3/4" I.D.

German Push Rod Tube Seals

Ref P/N: 113 109 345AS

These High Temperature Push Rod Tube Seals will hold up to high heat without drying and cracking

1928-31 Ford Ignition Switch Plate (On & Off) w/ Stainless Steel Ring

Fits 1928-1931 Ford Model A

Replaces OEM Part: A-1156

Always Keep Your Baby in Sight: With a large mirror size of 7.4x11.8” and its convex shape, you’ll always be able to tell at a glance if your little one is doing okay. Plus, with a 360-degree joint it’s fully adjustable so you can angle it perfectly.

Safety Certified and Crash Tested: Design of Shatterproof Acrylic Glass, strongly tied up by heavy duty straps, full rotation with hinge, in the event of a Crash or Accident you can make sure of your baby’s safety.

Simple Installation: We’ve made installation a breeze. Simply fasten the straps to your car’s backseat head rest, adjust the viewing angle to your rearview mirror and you’re all set.

【360 Degree】2 pieces packaged, newest upgrade 360 degree rotate and sway adjustable, maximize your view with wide angle in car. All convex spot mirrors are equipped with tiny adjustable swivel mounting bracket for easy installation.

【More Safety】Convex mirrors increase safety by eliminating blind spots for safer driving when passing and changing lanes on any road. Perfect for any Car, Van, SUV and Trucks.

【HD Glass】Our 2" HD Glass Curved Blindspot Mirrors is frameless and has a slim design, IP65 waterproof, rust resistant, Convex ultra thin HD glass, no haze rear view side mirror.

Superior Quality - Dependable Direct replacement automotive side view mirrors are an economical and quality alternative to high priced OE mirror assemblies. All Dependable Direct parts are manufactured using high quality materials and designed to meet OEM specifications

Vehicle Compatibility - It is very common to have multiple variations of mirror styles & features for each year, make, & model. Please check the Partslink and OE Reference numbers to make sure you are getting the correct replacement side view mirror for your vehicle. Also make sure the mirror features are the same

Mirror Features - Location: Driver Side - Color Finish: Smooth Black - Operation Type: Power - Folding Type: Non-Folding - Base Type: Plastic

Universal Golf Cart Mirrors: Suitable for most golf carts, such as Club Car EZGO Yamaha, You will receive 1 Pair Golf Cart Side Mirror & 1 Golf Cart Rear View Mirror. SAVE $12 by purchasing these mirrors compared to buying individually.

Large Clear Vision: You can see just about everything behind your left and right hand shoulders since intall our golf cart mirrors! The best Christmas gift or Thanksgiving gift for golfer boss husband father boyfriend.

More Safety & High Quality: Our golf cart side mirrors and golf cart rear view mirror provide you non-distorted and ultra clear images, helping to reduce blind spots and ensure your driving safety, the high impact plastic construction of the housing resists damage for years to come.

Superior Quality - Dependable Direct replacement automotive side view mirrors are an economical and quality alternative to high priced OE mirror assemblies. All Dependable Direct parts are manufactured using high quality materials and designed to meet OEM specifications

Vehicle Compatibility - It is very common to have multiple variations of mirror styles & features for each year, make, & model. Please check the Partslink and OE Reference numbers to make sure you are getting the correct replacement side view mirror for your vehicle. Also make sure the mirror features are the same

Mirror Features - Location: Passenger Side - Color Finish: Textured - Operation Type: Manual - Folding Type: Folding - Base Type: Plastic