Best Pumpspy in 2026

CUTTING-EDGE TECHNOLOGY: The Primary Sump Pump Backup Power System provides overcharge prevention. Once fully charged, the battery is maintained with a "trickle charge" to ensure it remains fully powered and ready for use. This item also includes a smart cooling feature for enhanced safety and extended life expectancy.

HIGH PERFORMANCE: Never again worry about your basement during power outages! Our efficient backup unit generates a Pure Sine Wave 120 VAC voltage that is cleaner, quieter, and more stable. It has a 1500 Watt output and can power two primary sump pumps simultaneously with a combined current draw not exceeding 12.5 Amps.

EXCELLENT RELIABILITY: The Primary Sump Pump Backup Power System safely and effectively powers your sump pump during a power outage. When the AC power fails, it switches to battery power and instantly recharges when the power comes back on. For convenience, it has two grounded outlets.

CUTTING-EDGE TECHNOLOGY: The Primary Sump Pump Backup Power System provides overcharge prevention. Once fully charged, the battery is maintained with a "trickle charge" to ensure it remains fully powered and ready for use. This item also includes a smart cooling feature for enhanced safety and extended life expectancy.

HIGH PERFORMANCE: Never again worry about your basement during power outages! Our efficient backup unit generates a Pure Sine Wave 120 VAC voltage that is cleaner, quieter, and more stable. It has a 2000 Watt output and can power two primary sump pumps simultaneously with a combined current draw not exceeding 16.6 Amps.

EXCELLENT RELIABILITY: The Primary Sump Pump Backup Power System safely and effectively powers your sump pump during a power outage. When the AC power fails, it switches to battery power and instantly recharges when the power comes back on. For convenience, it has two grounded outlets and a USB Charge Port.

HIGH-PERFORMANCE FLOAT SWITCH: Designed for maximum dependability, PumpSpy's Tether Float Switch is made of gold-plated electrical connections that are resistant to accelerated pitting and wear. It detects changes in the water level and activates its automatic on/off function. 10 Amps @ 120VAC - Normally Open.

WIDE APPLICATION: This portable tool is a versatile float switch used with sump, sewage, or effluent pumps. It is intended for installation on the sump pump discharge pipe and helps provide a dependable and practical solution for automating your pump system.

UNIVERSAL REPLACEMENT: Have a replacement float switch ready when you need it the most! This universal replacement float switch will automatically activate your water pump. The float switch has a modular design and a 10-foot cord providing plenty of flexibility, while the piggyback plug helps to create a universal connection.

TURNS ANY 120V SUMP PUMP INTO A SMART DEVICE: PumpSpy WiFi Sump Pump Smart Outlet makes any sump pump into an internet-connected Smart Pump. This universal outlet is compatible with any 120VAC sump pump. PumpSpy sump pumps are recommended.

PUMPSPY 24/7 MONITORING: Download the PumpSpy app, connect the outlet to the Wi-Fi network, and then plug in your sump pump. Our computers automatically track incoming data from your pump and send detailed alerts via push notifications, text messages, or email. Your mobile device will receive alert details like power outages, high water levels, and blocked or frozen discharge lines.

WHAT YOU GET: You will get a Smart Outlet, a high water sensor, and a quick start guide. The Smart Outlet has a WiFi configuration button, two power outlets, and a connection for a high water sensor. The top outlet for the sump pump features a ring that glows to indicate the internet connection and pump status.

BATTERY POWERED WATER LEVEL SENSOR: Simply place our battery operated water sensor alarm on the floor, near the potential water source. Due to their ease of use and reliable functionality, they're the ideal water alarms for basements, laundry rooms, and so much more!

RELIABLE WATER DETECTOR ALARM: Water damage acts quickly and silently. Worry no more about hidden mildew or mold - Our water alarm leak detector protects your home from potentially costly water damage! Our water leak sensor minimizes the risk of water damage by providing an immediate warning when water is detected.

LOUD WATER LEAK ALARM: Our loud water leak detector features a 100 dB alarm alert that ensures you will be notified of unwanted moisture and wetness. Install our water sensor alarms near sump pumps, hot water heaters, dehumidifiers, washing machines, toilets, or under sinks!

SELF-STARTING PUMP: This Condensate pump from PumpSpy automatically detects and removes condensation from dehumidifiers, furnaces, or AC. Designed with a 1/20 HP high-performance motor that can create up to 18 feet of lift, this centrifugal pump can collect condensation liquid from heating systems and transfers it to appropriate drainage equipment.

QUALITY FEATURES: Like other water pumps and accessories we offer, this condensation pump also has fantastic features that make it very functional. Our condensate pump for air conditioner, dehumidifier, or furnace was designed with synchronous motor technology for quiet operation and durability. Meant to withstand water and moisture exposure, we encapsulated its motor with epoxy.

BUILT-IN SAFETY SWITCH: This unit contains a built-in safety switch that can be optionally wired into a connected air conditioner, furnace, or dehumidifier. If the connected unit is producing too much condensation, the safety switch will shut the connected unit's power off. This prevents water damage from excess condensation.

FAST AND EASY TO SET UP: PumpSpy PS2000C SmartPump Combination System with check valves comes pre-assembled. Homeowners who have a knack for DIY projects will appreciate the easy installation of its components. In 15 minutes, the system will be ready to use. Designed to connect to an existing 1.5" discharge line. This efficient installation requires a 15-inch diameter or a larger sump basin and 1.5" discharge pipe.

WITH REMOTE MONITORING & ALERTS: With Wi-Fi connectivity, PumpSpy remotely monitors the primary sump pump & backup pump performance and battery status 24/7. Every two days, there will be system & battery tests performed to ensure that the system is in good condition and ready for the next storm. Setting it up with the PumpSpy app allows you to view real-time data of your pump system's activities anywhere, anytime.

POWERFUL BASEMENT PROTECTION SYSTEM: This SmartPump combination consists of a primary ½ HP pump with a 7-Amp split capacitor motor that can pump up to 4,320 gallons/hour, 3,780 gallons/hour at 10 feet of lift, and has a maximum lift of 30 feet. Its 12V backup sump pump can pump up to 3,600 gallons/hour, 2,400 gallons/hour at 10 feet of lift. Pump switches are rated for 1 million cycles. Dual backup pump switches for extra protection.

HIGH PERFORMANCE: Protect your basement from water with the high-performing and efficient PS500 1/2 HP sump pump. This submersible pump has strong suction and a powerful 7-amp split capacitor motor. It pumps up to 4,320 gallons/hour, 3,780 gallons/hour at 10 feet of lift, and has a maximum lift of 30 feet. This pump is ideal for removing large amounts of water from the basin inside your basement or crawlspace.

STURDY CONSTRUCTION: Drain water from your basement's basin and prevent flooding with our 1/2 HP cast iron sump pump. It was reinforced for durability and enabled to withstand many years of performance. Our submersible water pump has a corrosion and rust-resistant housing for extreme resistance to cracking, peeling, or flaking. The solid build provides added strength and toughness, removing any water coming into your basement or any crawl space.

RELIABLE: Our 1/2 HP sump pump is a fast and efficient way to reliably keep water out of your basement. Its powerful motor makes it an ideal choice for submersible operation, draining water to prevent a flooded basement or crawlspace. Whether it's rain, snow melt, or springtime showers, our 1/2 sump pump will keep your basement dry.

1/4 HP Utility pump moves up to 1,800 gallons per hour; pump will lift water up to 25' of vertical height

Tough thermoplastic construction; 10' cord length

1-1/4 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter

1/3 HP Utility pump moves up to 2,400 gallons per hour; pump will lift water up to 25' of vertical height

Tough thermoplastic construction; 10' cord length

1-1/4 inch NPT discharge for hight capacity pumping; includes 3/4 inch garden hose adapter

✔ HYDRO AERATION TECHNOLOGY BY INTEX – Transforming the Above Ground Pool industry, by bringing revolutionary water aeration benefits such as improved circulation and filtration, improved water clarity, and increased negative ions at the water surface

✔ EASY INSTALLATION – Just hook up hoses and plug in! This pump is a must have for any above ground pool up to 19,600 gal (Partial assembly required)

✔ 24 HOUR TIMER – The SX3000 has a built-in 24-hour timer with 2 to 12 hour pre-set cycles for automatic operation; the timer adds to the hassle-free experience with maintaining a cleaner pool

AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers

230 VOLT HIGH PERFORMANCE MOTOR: 1/30 HP, 0.5 Amps, 75 Watts, 60 Hz, thermally protected, fan-cooled motor; CSA listed in the USA and Canada

230 VOLT PLUG: This unit is 230 Volts and comes with a 6-ft. cord and plug; the plug does not fit standard 115-Volt wall outlets

AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers

HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor; CSA listed in the USA and Canada

BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor; CSA certified to US and Canadian standards

AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers

THERMALLY PROTECTED MOTOR: 1/50 HP, 1 Amp, 60 Watts, 115 Volts, 60 Hz, fan-cooled motor; CSA listed in the USA and Canada

BUILT TO LAST: stainless steel motor shaft, thermal overload protected motor; CSA certified to US and Canadian standards

INDOOR USE ONLY - This 3/4 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU980E can pump up to 5,490 GPH to keep your basement dry.

TOUGH AND DURABLE - Corrosion-resistant stainless steel motor housing and fasteners come with a cast-iron volute that provides long life in tough sump pump applications.

EFFICIENT DESIGN - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!

Indoor Use Only - This 1/2 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU800 can pump up to 5,100 GPH to keep your basement dry.

Tough And Durable - Corrosion-resistant epoxy coated steel motor housing and stainless steel fasteners come with a cast-iron volute that provides long life in tough sump pump applications.

Efficient Design - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!

Professional-grade, 3/10 HP submersible pump for residential dewatering (sump) or effluent (septic tank systems) use.

AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers

THERMALLY PROTECTED MOTOR: 1/50 HP, 1 Amp, 60 Watts, 115 Volts, 60 Hz, fan-cooled motor; CSA listed in the USA and Canada

BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor; CSA certified to US and Canadian standards

Indoor Use Only - This 1/3 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU790 can pump up to 4,600 GPH to keep your basement dry.

Tough And Durable - Corrosion-resistant epoxy coated steel motor housing and stainless steel fasteners come with a cast-iron volute that provides long life in tough sump pump applications.

Efficient Design - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!

AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers

HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor; CSA listed in the USA and Canada

BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor; CSA certified to US and Canadian standards

DON’T LET STANDING WATER BUG YOU - The WAYNE WaterBUG is your new ultimate multi-purpose water removal tool. The WWB model is easy to use in tight spaces like window wells, or big spaces like basements thanks to patented Multi-Flo Technology.

GET RID OF WATER QUICKLY - Multi-Flo technology allows for easy selection of the best water removal option. This WWB water pump will get your basement or yard virtually dry by pumping up to 1350 GPH and removing water down to 1/16”.

REMOVAL OPTIONS - Top discharge is perfect for removing water from small or tight spaces: window wells, buckets, etc. Side discharge is ideal for easy water removal from flat open surfaces: flat roofs, flooded basements, standing water in yard, etc.

1/3 HP Sump pump moves up to 2,760 gallons per hour; pump will lift water up to 25' of vertical height

Rugged cast iron construction; 10-foot cord length

Vertical float switch to automatically turn the pump on/off. Switch on and off point is 6 and 2 inches

APPLICATIONS: designed for automatic removal of water from pool covers, boat covers or rooftops - pump activates in 2-inches of water and shuts off when water drops to 1-inch

EASY MAINTENANCE: access to pump float and air lock for cleaning; requires no tools or screws; see video for demonstration

WELL DESIGNED: ergonomically built-in handle for portability and ease of placement and removal; compact weighted design for stability

AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers

THERMALLY PROTECTED MOTOR: 1/50 HP, 1 Amp, 60 Watts, 115 Volts, 60 Hz, fan-cooled motor; CSA listed in the USA and Canada

BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor; CSA certified to US and Canadian standards

Product 1: MANUAL UTILITY PUMP:

Product 1: SUBMERSIBLE PUMP: Typical applications

Product 1: BUILT TO LAST: constructed of epoxy coated die-cast aluminum with a 1/6 HP permanently lubricated shaded pole motor with thermal overload protection;

Indoor Use Only: This 1/2 HP WAYNE indoor sump system is perfect to keep your basement or indoor area dry during heavy water flow, even if you lose electricity; whether it’s rain, snow melting or more, WAYNE model WSS30VN can keep your basement dry

Back-Up Ready: WSS30VN will pump up to 5,100 GPH and remove/evacuate/expel/get rid of up to 10,000 gallons on a single battery backup charge; WAYNE WSB1275 75 AH Battery is required for back-up but not included

Efficient Design: Comes preassembled and ready for drop-in for easy installation in 15 minutes or less with no need to drill a weep hole; fits in 16” diameter or larger sump basins

Product 1: CONDENSATE REMOVAL PUMP: Little Giant Automatic Condensate Pump features safety switch, 1/3-gallon ABS plastic tank, 6 ft. power cord, 1/30 HP pumps 84 gallons of water per hour

Product 1: AUTOMATIC HVAC PUMP: Ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment where automatic drain pump is required

Product 1: STAINLESS STEEL MOTOR SHAFT: Vertical-type pump features stainless steel motor shaft and galvanized steel tank cover; Thermally protected motor is UL and CSA listed; Includes three 1-1/8” diameter inlet openings; Maximum water temperature: 140°F

Made In America

MECHANICAL COMPONENTS

Commercial Brand: Liberty

Variable speed technology costs significantly less to operate. Savings based on variable speed pump compared to a single-speed pump running 12 hours per day at an average of $0. 16 per kWh in a 20, 000 gallon.

Ideal for standard pools requiring up to 1. 5 hp pump; 110-230v and 50 and 60 Hz capability

Real-Time clock with 24-hour memory retention

3/8-Inch solids handling

Pumps up to 37 GPM with a discharge head of 5-Foot

Maximum discharge head of 21-Foot