Best Qjz2K in 2026

HCT207-20-x2

2205-2RS-x2 Ball Bearing

2205-2RS-x10 Ball Bearing

HCT207-23-x2

HCT204-12-x2

2208-2RS-x2 Ball Bearing

2205-2RS Ball Bearing

2200-2RS-x2 Ball Bearing

Ideal for use in myriad mechanical applications

Flanged construction

Oil-impregnated

👍Package Content:4Pcs Pillow Block Bearings.Bore Diameter:10mm/0.39".Total Size:67mm*15mm*347mm/2.64"*0.59"*1.34"(L*W*H).Mounting Hole Distance:52mm/2.05".Mounting Hole Size:7mm/0.28''.

👍Two-bolt housing with ball bearing insert for ready-to-mount installation.

👍Self-aligning pillow block bearing. You can adjust or replace the bearing easily.

✅Package Content:4Pcs KFL08 Pillow Block Bearing Flanges.

✅Bore Size:8mm/0.31''.Mounting Hole Diameter: 5mm/0.2".Mounting Hole Distance: 37mm/1.46''.Bearing Inner Dia.: 8mm/0.31''.Total Size:48mmx27mmx11mm/1.88"x1.06"x 0.43"(L*W*H).

✅Made of high-quality zinc alloy with high strength, which is durable. The high-strength rolling body with better load carrying capacity is more abrasion-resistant. Polished by high precision CNC machine tool. It produces low noise and high speed. It is not easy to get hot so the use period is long.

Material:Zinc Alloy

Color:Silver

Package Content:4pcs Pillow Block Bearing

Two-bolt housing with ball bearing insert for a ready to mount installation

Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads

Relubricatable solid one-piece housing pillow block for maximum strength and rigidity

Ductile iron flanged housing for higher tensile strength and lighter weight than standard cast iron

Intermediate-duty, double-sealed ball bearing insert for applications with moderate radial loads and light thrust or combination loads

Contact seals on both sides of the bearing keep lubricant in and contaminants out

Cast iron flanged housing for vibration damping and structural rigidity

Normal-duty, double-sealed ball bearing insert for applications with moderate radial loads and thrust or combination loads

Contact seals keep lubricant in and contaminants out and flingers provide extra sealing protection

Cast iron flanged housing for vibration damping and structural rigidity

Normal-duty, double-sealed ball bearing insert for applications with moderate radial loads and thrust or combination loads

Contact seals keep lubricant in and contaminants out and flingers provide extra sealing protection

HCT207-20-x2

Material: Zinc Alloy, Bearing Steel.

Color: Gray; Inside Diameter: 8mm/0.31".

Model: KFL08; Overall Size: 48(+/-1) x 27(+/-1) x 8(+/-1)mm/1.9" x 1.06" x 0.31"(L*W*H)

UCT205-16 Pillow Block ( ISO 9001:2000 )

Bearing Material: Chromium Steel ( Gcr15 )

Housing Material: Cast Iron

Cast iron flanged housing for vibration damping and structural rigidity

Double-sealed, deep-groove ball bearing insert with an extended inner ring on both sides for applications with radial, thrust, and combined loads

Acrylonitrile-butadiene rubber (NBR) seals keep lubricant in and contaminants out and flingers provide extra sealing protection

Design: UCF flanged series has four-bolt mounting with set screw locking.

Self-Aligning Feature: These bearings use wide inner ring ball bearings with self-aligning spherical outside diameters that compensate for shaft misalignment.

Pre-lubricated: Bearings come pre-lubricated and ready for immediate installation. A grease fitting is supplied for re-lubrication.

Design: UCP pillow block series has two-bolt mounting with set screw locking.

Solid Base Housing: Jeremywell pillow blocks are manufactured without cavities and fillers, their solid base makes the bearings stronger and more durable. A solid base helps eliminate material build-up and is easy to maintain unlike a hollow base housing.

Self-Aligning Feature: These bearings use wide inner ring ball bearings with self-aligning spherical outside diameters that compensate for shaft misalignment.

Size: 35mm Inner Diameter, Model: UCT207

Material: Cast iron housing, chrome steel insert bearing. Smooth and low noise, easy to install.

Feature: Can slide on a fixed track, so that the center of the shaft can be changed. Can be filled with fresh grease at the grease nozzle.

Take-up Unit UCT 208

Set Screw Collar

cast iron Housing

HCT207-23-x2

Item: UCT205E Bearing

Type: Take Up Mounted Bearing

Basic Load (Cr): 14.0 KN

✔️ [Bearing Type] - Insert Bearing UC206-19, Cast Iron Housing T206, UCT206-19

✔️ [Bore Shaft Diameter] - 1.187 in | 30.16 mm

✔️ [Height] - 4.016 in | 102 mm

UCT208-24

HCT204-12-x2

126173 - DODGE 126173 FC-SCM-112 126173