Last Updated: Sep 27, 2023
* PickSmartly editors independently research, review, and endorse the top products through comprehensive data analysis. We may earn a commission for qualifying purchases made through our product links.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.38 | ✅ | ✅ | ✅ |
Cooperate with open linear bearing to ensure excellent sports performance
The external material :Aluminum Alloy
100% Brand new and high quality
Supports performance under high load or long stroke
Smooth moving,low friction,high performance and long life
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.37 | ✅ | ✅ | ✅ |
【Technical Parameters】- Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 110V 0-50Hz/60Hz. Output：3phase 110V 0-400Hz. Communication Control: RS-485. Vibration: below 0.5G. Operation Temperature: -10 ～40℃. Five-Digits Display and Status Indicator Lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect.
【General Control】- In addition to 4 segment reduction time (0.1-6500 seconds) can be arbitrarily selected, not only can set a V / F curve, but also set torque, up to 10.0% start torque can reach 150%. There are also other functions, like an automatic voltage regulator (AVR), deceleration stop or free stop, DC brake, automatic reset reset, frequency tracking, PLC program control, transverse control, carrier adjustable by max 20kHz, ect.
【Input/Output Terminals】- 6 Multi-function input terminals can implement 8 speed control, program operation, 4 segment reduction switching, UP/DOWN functions, counter, external emergency stop function. There are 5 multi-function output terminals for displaying running, zero speed, counter, external abnormity, program operation and other information and warnings.
【Multi-Protection Functions】Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection, restarted by frequency track after instantaneous stop, anti-stall during acceleration/deceleration operation, electronic circuit protection. And many other protection functions, such as over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, ect.
【Installation/use environment】In order to make the cooling effect, the frequency converter must be installed vertically and ensure that the air is flowing smoothly. Before installing and using the product, please read the instruction manual (included in the package) of the inverter carefully to give full play to its functions and ensure safety.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.53 | ✅ | ✅ | ✅ |
【Technical Parameters】- Control Model: SPWN. Power: 3KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3phase 220V 0-400Hz. Communication Control: RS-485. Vibration: below 0.5G. Operation Temperature: -10 ～40℃. Five-Digits Display and Status Indicator Lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect.
【General Control】- In addition to 4 segment reduction time (0.1-6500 seconds) can be arbitrarily selected, not only can set a V / F curve, but also set torque, up to 10.0% start torque can reach 150%. There are also other functions, like an automatic voltage regulator (AVR), deceleration stop or free stop, DC brake, automatic reset reset, frequency tracking, PLC program control, transverse control, carrier adjustable by max 20kHz, ect.
【Input/Output Terminals】- 6 Multi-function input terminals can implement 8 speed control, program operation, 4 segment reduction switching, UP/DOWN functions, counter, external emergency stop function. There are 5 multi-function output terminals for displaying running, zero speed, counter, external abnormity, program operation and other information and warnings.
【Multi-Protection Functions】Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection, restarted by frequency track after instantaneous stop, anti-stall during acceleration/deceleration operation, electronic circuit protection. And many other protection functions, such as over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, ect.
【Installation/use environment】In order to make the cooling effect, the frequency converter must be installed vertically and ensure that the air is flowing smoothly. Before installing and using the product, please read the instruction manual (included in the package) of the inverter carefully to give full play to its functions and ensure safety.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.58 | ✅ | ✅ | ✅ |
【Technical Parameters】- Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3phase 220V 0-400Hz. Communication Control: RS-485. Vibration: below 0.5G. Operation Temperature: -10 ～40℃. Five-Digits Display and Status Indicator Lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect.
【General Control】- In addition to 4 segment reduction time (0.1-6500 seconds) can be arbitrarily selected, not only can set a V / F curve, but also set torque, up to 10.0% start torque can reach 150%. There are also other functions, like an automatic voltage regulator (AVR), deceleration stop or free stop, DC brake, automatic reset reset, frequency tracking, PLC program control, transverse control, carrier adjustable by max 20kHz, ect.
【Input/Output Terminals】- 6 Multi-function input terminals can implement 8 speed control, program operation, 4 segment reduction switching, UP/DOWN functions, counter, external emergency stop function. There are 5 multi-function output terminals for displaying running, zero speed, counter, external abnormity, program operation and other information and warnings.
【Multi-Protection Functions】Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection, restarted by frequency track after instantaneous stop, anti-stall during acceleration/deceleration operation, electronic circuit protection. And many other protection functions, such as over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, ect.
【Installation/use environment】In order to make the cooling effect, the frequency converter must be installed vertically and ensure that the air is flowing smoothly. Before installing and using the product, please read the instruction manual (included in the package) of the inverter carefully to give full play to its functions and ensure safety.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.37 | ✅ | ✅ | ✅ |
Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform
0.8kw 800W 1.5kw Spindle motor mount bracket clamp
Material: Aluminum,Surface sandblasted. weigth is 1.01kgs
Fit for : CNC 65mm Diameter High-speed Spindle Motor
Cast aluminium fixture is much heavier than aluminium profile fixture
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.48 | ✅ | ✅ | ✅ |
【Upgrade Version CNC 3018 PRO】※ Frame size: 30x26x25CM. Working area:18x10x4.5CM. Material: Aluminum Alloy. Spindle: 775 spindle motor (12-24V) 24V:10000r/min. Stepper motor: 42 stepper motor, 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m
【Material/Dimensions】※ The fixed external frame is made of black injection molding material, working table is aluminum alloy material. Screw rods uses stainless steel quality. It can able to engraving in plane by moving X/Y/Zaxis. High precision and durability and good appearance.
【Simple Assembly/Use】※ This mini cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and USB flash drive of all the files.
【Update GRBL Board】※ The updated control board has added the functions of supporting emergency stop button and X/Y/Z axis limit, and the functions are more complete. Users can design and equip those DIY accessories suitable for this mini engraving machine according to their own needs. Equipped with a silent cooling fan, which can dissipate heat quickly during operation, with low noise and good quality. Also, the control board can automatically identify the offline controller, support PWM.
【Applicable Engraving Material】※ CNC 3018 PRO machine can not only engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and so on, but also soft metal like copper, aluminum and the similar materials. Howerever, harder materials cannot be engraved such as glass, hard metal, jade, ect.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| L-STAR MOTOR | 7.62 | ✅ | ✅ | ✅ |
♞【Product】6.35x10mm-25x30mm flexible plum coupler,inner diameter 6.35mm to 10mm,D25 to L30mm.Structure:Jaw / Spider
♞【Advantags】 With high rigidity,high flexibility,vibration absorption,high torque and low inertia,with zero back clearance,easy disassembly and assembly,same rotation clockwise and counterclockwise.
♞【Material】The high-quality material is made of aluminum alloy and polyurethane
♞【Applications】Widely used to connect servo motors, stepper motors, spindle,encoders, screw drives, machine tool platforms, etc. Compatible with Nema23 stepper motor (inner diameter 6.35mm to 10mm)
♞【Package includes】3pcs 6.35x10mm-25x30mm flexible plum couplers
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| L-STAR MOTOR | 7.87 | ❌ | ❌ | ❌ |
Model Number:For Nema23
Usage:Stepper Motor Bracket
Material:Aluminum
Standard or Nonstandard:Standard
Name:NEMA 23/57 Stepper Motor bracket
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.38 | ✅ | ✅ | ✅ |
Material: Aluminum Alloy; Effective Stroke: 200mm; Horizontally loadable: 80kg; Vertical carrying: 20kg; Width: 80mm.
Standard motor: 57 stepper motor 1.8° 2.8A 1.26N.m; Screw: Ballscrew drive 1605-diameter 16 pitch 5mm.
Total length of the linear Motion Actuator including the stepper motor : 430mm; Total length of the base plate without: 319mm.
Standard M5 mounting hole: M5 movable nuts are used on the sides and bottom to make the installation of the sliding table more flexible and changeable.
High speed slient, smooth running; SFU1605 ball screw, accuracy up to 0.03mm.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.52 | ✅ | ✅ | ✅ |
Material: Aluminum Alloy; Effective Stroke: 400mm; Horizontally loadable: 80kg; Vertical carrying: 20kg; Width: 80mm.
Standard motor: 57 stepper motor 1.8° 2.8A 1.26N.m; Screw: Ballscrew drive 1605-diameter 16 pitch 5mm.
Total length of the linear Motion Actuator including the stepper motor : 630mm; Total length of the base plate without: 519mm.
Standard M5 mounting hole: M5 movable nuts are used on the sides and bottom to make the installation of the sliding table more flexible and changeable.
High speed slient, smooth running; SFU1605 ball screw, accuracy up to 0.03.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.48 | ✅ | ✅ | ✅ |
Material: Aluminum Alloy; Effective Stroke: 100mm; Horizontally loadable: 80kg; Vertical carrying: 20kg; Width: 80mm.
Standard motor: 57 stepper motor 1.8° 2.8A 1.26N.m; Screw: Ballscrew drive 1605-diameter 16 pitch 5mm.
Total length of the linear Motion Actuator including the stepper motor : 330mm; Total length of the base plate without: 219mm.
Standard M5 mounting hole: M5 movable nuts are used on the sides and bottom to make the installation of the sliding table more flexible and changeable.
High speed slient, smooth running; SFU1605 ball screw, accuracy up to 0.03.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.48 | ✅ | ✅ | ✅ |
【Upgrade Version CNC 3018 PRO MAX 】Frame size: 40x33x24CM. Working area: 30x18x4.5CM. Material: Aluminum Alloy. Spindle: 775 spindle motor (12-24V) 24V:10000r/min. Stepper motor: 42 stepper motor, 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m
【Simple Assembly/Use】This mini cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and USB flash drive of all the files. It comes with 14pcs ER11 collets, size is : 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 3.175mm(1/8")
【Applicable Engraving Material】CNC 3018 PRO MAX machine can not only engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and so on, but also soft metal like copper, aluminum and the similar materials. Howerever, harder materials cannot be engraved such as glass, hard metal, jade, ect.
【Update GRBL1.1 Control Board】 ①The GRBL board supports emergency stop and X/Y/Z axis limit functions, which can be used together with the emergency stop button and limit switch on the engraving machine to ensure a safe and simple working environment. ②Other functions and features such as: maximum support for 20000RPM spindle, tool setting(probe) , offline controller, with a power switch button and a silent fan cooling.
【CNC Offline Controller】This machine can be controlled simply by the offline controller without connecting it to a computer. Support SD card and TF card at the same time, standard capacity 1G. After inserting the file into the SD card,the engraving file can be directly identified.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| L-STAR MOTOR | 8.12 | ✅ | ✅ | ✅ |
Holding Torque:3N.m;Current:5A;Phase:2
Servo Driver:HSS60 2-Phase Hybrid Stepper Servo Driver
Size:60x60x88mm;Step Angle(degrees):1.8deg
Voltage:DC24~50V;Insulation resistance:100MOhm(500V)
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| L-STAR MOTOR | 8.12 | ✅ | ✅ | ✅ |
♞【Fit for 】57mm Nema23 Stepper Motor
♞【Material】Alloy steel.Durable steel construction. thickness 3mm, exquisite workmanship, surface paint treatment
♞【Advantage】Durable alloy steel provide strong bearing pressure when printing.
♞【Product weight】170 G / 6.00 Ounces
♞【Package Included】1x Nema23 Mounting Bracket & 4x Fastener Screws
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| L-STAR MOTOR | 7.92 | ✅ | ✅ | ✅ |
♞【Nema23 Stepper Motor】Step Angle: 1.8°; Current: 3.0A; Holding torque: 425oz-in/ 280Ncm; Shaft: Dual Shaft,Shat diameter: 8mm; Wirings: "A+"=Red / "A-"=Green / "B+"=Yellow / "B-"=Blue
♞【FMD2740C Driver】Input Voltage: DC18-50V; Current: 1.4A-5.6A;Subdivision precision: 400,800,1600,3200,6400,12800,25600,1000,2000,4000,5000,8000,10000,20000 and 25000 optional
♞【4 Axis USB CNC Breakout Board】Card input voltage: 15-36VDC; With remote hand control; USB port,only support USBCNC Software,with a CD,you can download the manual,software and registration code.Support limit switch;0-10V speed control signal,external pause and reset interface etc
♞【400W 36V 11A DC switching power supply】Please flip the side input voltage selector switch to choose the input power supply,support input voltage : AC110V-120V or AC220V-240V;
♞【Support computer system 】Support Win XP/7/8/10 system,if you can not get the activation code on Win 10 or can not get the registration code from the CD,pls let us know,we will help you to solve it and send you the registration code.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.42 | ✅ | ✅ | ✅ |
This product has obtained the national patent, widely used in CNC lathe, general lathe, drilling machine, tapping machine, grinding machine, tool grinding machine, NC, CNC machine, punching machine, sawing machine, milling machine
Cooling the processing solution can save more than 80%, the cooling effect is no less than the conventional water-cooled.
Gas processing debris was blown away, processing more secure.
The spray coolant gas and cooling liquid is adjustable, easy to use on different processing conditions.
Metal hose, long life.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| L-STAR MOTOR | 7.87 | ✅ | ✅ | ✅ |
Nema23 stepper motor 23HS8430B
holding torque:1.8Nm (270oz.in)
Size:57x57x76mm ; 1.8 deg ; Rated current 3A
Shaft:Dual Shaft ; Lead wire:4pcs ; Phase:2 ; Type:Hybrid
Application 1:Semiconductor Equipment;Application 2:Milling Machine, Engraver Machine ; Application 3:CNC Routers
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.48 | ✅ | ✅ | ✅ |
CNC Router Mill: Z-Axis Tool Setting Touch Plate works w/ Mach3
Cnc Z Axis Router Mill Touch Plate Mach3 Tool Setting Probe New Milling Hot Kit.
Milling Tools CNC Z-Axis Tool Setting Touch Plate Probe Mach3 Router Mill
Effective Surface Diameter: 30mm.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.37 | ✅ | ✅ | ✅ |
Product name: BK10 + BF10 Ball Screw End Support, suitable for SFU/RM 1204 ballscrew
Support unit such as BK type bearing into the proper amount of lithium soap grease, with special sealing gasket for seal, can direct installation, use for a long time.
The surface blackening process, high precision support.
Material: Carbon steel, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance.
High rigidity, high precision and stable performance of rotation.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.38 | ✅ | ✅ | ✅ |
【Package Include】: ①1 x 0.8KW Water Cooled Spindle Motor ER11 ②1 x 1.5KW VFD 110V③1 x 65mm Spindle Motor Mount ④1 x 80W Water Pump ⑤1 x 5m Pipe ⑥14 x ER11 Collet（1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 3.175mm）
【0.8KW Spindle Motor】: ①This is a 110V-0.8KW water-cooled 4A Φ 65x158mm spindle motor come with a ER11 nut and collet, and equipped with a 65mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.02mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the main shaft cannot only rotate clockwise or counter clockwise.
【VFD Inverter Parameters】The 1.5KW variable frequency drive inverter has five-digits display and status indicator lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect. Input Voltage: 110V(+/-15%) ,Output Voltage 110V, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 phase, Output Phase: 3 phase.
【How to Connect Spindle Motor and VFD Inverter】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
【80W 110V Water Pump】Power: 80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V/50HZ. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.37 | ✅ | ✅ | ✅ |
【2.2KW Spindle Motor】: ①This is a 220V-2.2KW water-cooled 8A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Under normal circumstances, the parameters of the inverter have been set and can be directly connected for use. (Or please follow the instructions to set the parameters).
【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
【80W 220V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 220V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
【1 Year Warranty】We offer 1 year warranty, if you have any questions about the product, please contact the seller for a satisfactory solution.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.48 | ✅ | ✅ | ✅ |
【Upgrade Version CNC 1610 PRO】Frame size: 30x26x25CM. Working area:18x10x4.5CM. Material: Aluminum Alloy. Spindle: 775 spindle motor (12-24V) 24V:10000r/min（with14pcs ER11 collets）. Stepper motor: 42 stepper motor, 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m
【Simple Assembly/Use】This mini cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and USB flash drive of all the files.
【Applicable Engraving Material】CNC 1610 PRO machine can not only engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and so on, but also soft metal like copper, aluminum and the similar materials. Howerever, harder materials cannot be engraved such as glass, hard metal, jade, ect.
【GRBL Control Board/Software】This machine can be controlled by Grblcontrol/Candle software after connecting the control board to a coumpter via USB port. The control board is equipped with a fan to force heat dissipation, also has more fuctions such as support spindle PWM speed, limit switch, tool setting, steering gear.
【CNC Offline Controller】This machine can be controlled simply by the offline controller without connecting it to a computer. Support SD card and TF card at the same time, standard capacity 1G. After inserting the file into the SD card,the engraving file can be directly identified.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.38 | ✅ | ✅ | ✅ |
【2.2KW Spindle Motor】: ①This is a 110V-2.2KW water-cooled 15A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 110V 0-50Hz/60Hz. Output：3 phase 110V 0-400Hz.Under normal circumstances, the parameters of the inverter have been set and can be directly connected for use. (Or please follow the instructions to set the parameters).
【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
【80W 110V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.48 | ✅ | ✅ | ✅ |
【Update CNC 3018PRO-N】The two sides of the Y-axis of the engraving machine are replaced with orange bakelite resin boards, which makes the engraving machine look brighter and more novel. The fixed external frame is made of resin, the work stable is made of aluminum alloy, and the screw rod is made of stainless steel, all of those makes the machine lightweight but more durable, more good apperance.
【Detailed installation and operating instructions】With the English instruction manual from the engraving machine installation to engraving, there are detailed instructions for the X-axis-Y-axis-Z-axis to the overall assembly of the engraving machine, and each installation step parts which is needed has been remarked; With detailed assembly and use videos, even novices don't have to worry about the assembly and use of the machine.
【Added new function】 Added an emergency stop button, during the engraving process, if the user encounters an emergency and needs to stop the engraving immediately, user can press the button to stop the operation. Added X/Y/Z axis limit switch, when the engraving machine moves up and down or left and right, it will stop immediately if it exceeds the forming range.
【GRBL Control Board and Offline Controller】 ①The GRBL board supports emergency stop and X/Y/Z axis limit functions, which can be used together with the emergency stop button and limit switch on the engraving machine to ensure a safe and simple working environment.② Other functions and features: maximum support for 2000RPM spindle, tool setting(probe) , a power switch button and a silent fan cooling. And equipped with a CNC GRBL offline controller.
【Supported engraving materials】Wood, plastic, acrylic, pvc, pcb, carbon fiber, density board, plastic phone cases, rubber stamps, copper , aluminum and other soft materials. It should be noted that materials such as jewelry, jade, stainless steel, stone, ceramics and other similar materials are not supported.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| L-STAR MOTOR | 7.92 | ✅ | ✅ | ✅ |
Holding Torque:12N.m;Current:6A;Phase:2;Peak current:8A
HSS86 2-Phase Hybrid Stepper Servo Driver;Type:Hybrid;Frequency:0~200KHz;
Size:86x86x154mm;Step Angle(degrees):1.8deg;Insulation class:B
Voltage:AC24~70V or DC30~100V;Insulation resistance:100MOhm(500V)
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.53 | ✅ | ✅ | ✅ |
Bearing: 4PCS C7005x2 + C7002x2, 3pcs high quality bearings.
Frequency: 400Hz; Runout off: Less than 0.02mm.The Spindle motor Mainly suitable for non-metallic engraving.
This spindle only supports clockwise rotation, not reverse rotation. Notice: The spindle speed can't lower than 9000rpm !!!!
ISO9001 quality certifications which means this item is the top quality item.
In extremely high speed working environment, ordinary bearing can not ensure this high rotate speed for using for long time.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.38 | ✅ | ✅ | ✅ |
【Nema23 Stepper Motor & Bracket】Step Angle: 1.8°; Current: 3.0A; Holding torque: 180N.cm/18kg-cm 270 oz-in; Shaft : single shaft,8mm diameter.
【TB6600 Driver】(1) Voltage: DC 10V-45V; It is recommended that customers should not input more than 36VDC, otherwise the chip will burst easily；(2)There are two input terminals, both of which adopt the common anode input mode.
【USB Mach3 Motion Control Card】 (1) This USB motion card does not need install any USB driver, Windows2000/XP/Windows7,can directly identify (Notice: Doesn't support Win8/win10/macOS system !!!) .
(2)4-axis linkage, Maximum step-pulse frequency: 100KHz, support connect four stepper motor drives or servo drives; (3) Signal Output:0-10V, it can control the spindle motor speed through using mach3 software.
【DC Switching Power Supply】350W 24V; 0-14.5A; AC input voltage range: 115VAC/6.5A/50HZ--230VAC/3.4A/60HZ; Selected by switch.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Kuku Tech | 7.58 | ✅ | ✅ | ✅ |
【Simple discreption】This is a 220V 2.2KW Square air-cooled spindle motor come with a ER20 nut and collet. Current is 6A, frequency is 400HZ, precision tapered bore is less than 0.005mm and runout off is Less than 0.01mm.
【Spindle speed】The speed of the spindle motor is 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lowered than 9000 rpm during the use of the spindle. Also ,it should be noted that the spindle only can rotate clockwise but not counter-clockwise.
【How to wring it to Inverter】The spindle’s terminal U1, V1, W1 are connected separately to inverter’s terminal U, V,W. Connect any 2pin terminal "R", "S" or "T" of the inverter to "220VAC".
【Note】Before driving, turn the shaft by hand first. The temperature's rise caused by the high-speed rotation of the spindle motor can be eliminated by the coolant circulation system.
【Main application】Wood, Aluminum, Glass, PVC industry.The Spindle motor is mainly suitable for NON-metallic engraving.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| L-STAR MOTOR | 7.92 | ✅ | ✅ | ✅ |
♞【Nema23 Stepper Motor】Step Angle: 1.8°; Current: 3.0A; Holding torque: 425oz-in/ 280Ncm; Shaft: Dual Shaft,Shat diameter: 8mm; Wirings: "A+"=Red / "A-"=Green / "B+"=Yellow / "B-"=Blue
♞【FMD2740C Driver】Input Voltage: DC18-50V; Current: 1.4A-5.6A;Subdivision precision: 400,800,1600,3200,6400,12800,25600,1000,2000,4000,5000,8000,10000,20000 and 25000 optional
♞【4 Axis USB CNC Breakout Board】Card input voltage: 15-36VDC; With remote hand control; USB port,only support USBCNC Software,with a CD,you can download the manual,software and registration code.Support limit switch;0-10V speed control signal,external pause and reset interface etc
♞【400W 36V 11A DC switching power supply】Please flip the side input voltage selector switch to choose the input power supply,support input voltage : AC110V-120V or AC220V-240V;
♞【Support computer system 】Support Win XP/7/8/10 system,if you can not get the activation code on Win 10 or can not get the registration code from the CD,pls let us know,we will help you to solve it and send you the registration code.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| L-STAR MOTOR | 8.12 | ✅ | ✅ | ✅ |
♞【5V input】This breakout board needs to be connected to the parallel port and USB port of the computer at the same time.but you can choose USB of PC to supply 5V or external power supply 5V;
♞【5 Axis】The maximum control five stepper motor driver
♞【Relay output control interface】Can be accessed by the spindle motor or the air pump, water pump, etc
♞【Support Software】Support MACH3, KCAM4, EMC2 and other software；
♞【Input interface】5-way input interface, you can connect limit switch and emergency stop switch,reset,knife signal;
As an online shopper, it's crucial to make informed decisions. This review will focus on Rattmmotor, a brand that has made its presence felt on Amazon. With its wide range of products in Power Milling Machines, Rattmmotor has become a go-to for many shoppers.
Rattmmotor offers a vast product count of 38 items. This diverse selection caters to a wide array of needs and preferences, making it a versatile brand for consumers.
Quality is a defining factor for any brand. Based on customer feedback and ratings, Rattmmotor's products have an average rating of 5.1 out of 10, indicating a high level of customer satisfaction.
When it comes to pricing, Rattmmotor has products ranging from a minimum price of $8.90 to a maximum of $365.00, with an average price of $132.96. This pricing structure caters to a wide range of budgets, making Rattmmotor an accessible choice for many shoppers.
Customer service is the backbone of any successful online brand. Rattmmotor is sold by kuku tech and l-star motor, who are known for their commitment to customer satisfaction. They have been responsive and helpful, according to customer reviews and feedback.
The shopping experience on Amazon with Rattmmotor has been largely positive. The brand's wide range of products, combined with the ease of navigation on Amazon, has made shopping a breeze for many customers.
Delivery and packaging are yet another aspect where Rattmmotor shines. Items are delivered in a timely manner and the packaging ensures the products reach the customers in pristine condition.
In conclusion, Rattmmotor offers a wide range of quality products at varying price points, making it a brand worth considering for your next Amazon purchase. Their commitment to customer service, combined with a seamless shopping experience, makes Rattmmotor stand out in the crowded Amazon marketplace.
Based on the analysis of product range, quality, pricing, customer service, shopping experience, and delivery, we rate Rattmmotor [5.1 out of 10 stars].
PickSmartly is dedicated to creating a platform designed to streamline your shopping experience, empowering you to make well-informed purchasing decisions with minimal time and effort. At the heart of our mission is the commitment to earning and maintaining the trust of our users, as we believe this to be fundamental to the services we provide.
When you engage with our websites, services, or tools, we or our approved service providers may utilize cookies to store information. This is done to enhance your user experience by making it more efficient, secure, and tailored to your preferences, as well as for marketing objectives.
We are an Amazon Associate and earn commissions from qualifying purchases. Our participation in the Amazon Services LLC Associates Program, an affiliate advertising initiative, provides us with a means to generate income through links to Amazon.com and its affiliated websites. Please note that Amazon, Amazon Prime, their logos, and the Amazon Prime logo are registered trademarks of Amazon.com, Inc., or its associated companies.
