Best Red Lion in 2025

VCM CONTROL BOX: Designed for 1/2 HP, 115 Volt deep well submersible pumps

Indoor/outdoor Use (NEMA Encl. 3 rating)

Four 7/8-inch knockouts; three 1-1/8-inch knockouts; drain hole, and two mounting holes

SHALLOW WELL JET PUMP: Red Lion Premium Cast Iron Shallow Well Jet Pump features a 1-1/4” FNPT suction intake and 1” FNPT outlet discharge; 3/4 HP pump can draw up to 16 gallons per minute

BUILT TO LAST: Rugged cast iron casing and volute for long life and high-efficiency; glass-filled thermoplastic impeller and diffuser for durability

HEAVY DUTY MOTOR: runs on either 115 or 230 volts; voltage must be selected to match incoming power source; Includes a capacitor for increased starting power; CSA listed in USA and Canada

SHALLOW WELL JET PUMP: Red Lion Premium Cast Iron Shallow Well Jet Pump features a 1-1/4” FNPT suction intake and 1” FNPT outlet discharge; 1 HP pump can draw up to 23 gallons per minute

BUILT TO LAST: Rugged cast iron casing and volute for long life and high-efficiency; glass-filled thermoplastic impeller and diffuser for durability

HEAVY DUTY MOTOR: runs on either 115 or 230 volts; voltage must be selected to match incoming power source; Includes a capacitor for increased starting power; CSA listed in USA and Canada

SHALLOW WELL JET PUMP: Red Lion Premium Cast Iron Shallow Well Jet Pump features a 1-1/4” FNPT suction intake and 1” FNPT outlet discharge; 1/2 HP pump can draw up to 12 gallons per minute

BUILT TO LAST: Rugged cast iron casing and volute for long life and high-efficiency; glass-filled thermoplastic impeller and diffuser for durability

HEAVY DUTY MOTOR: runs on either 115 or 230 volts; voltage must be selected to match incoming power source; Includes a capacitor for increased starting power; CSA listed in USA and Canada

SUBMERSIBLE DEEP WELL PUMP: 3.9-inch diameter well pump fits 4-inch diameter driven wells or larger wells with depths down to 333 feet; NSF/ANSI 372 certified for potable water

BUILT-INS: built-in check valve help keep pump from rapid cycling and extends the motor life; built-in suction screen helps keep debris out protecting the impellers

3/4 HP MOTOR: 2-wire, 230-volt motor (not including the ground wire) delivers up to 12 GPM and draws water from 333 ft. (at 50 PSI delivers 12 GPM at a draw down of 293 ft.)

SUBMERSIBLE DEEP WELL PUMP: 3.9-inch diameter well pump fits 4-inch diameter driven wells or larger wells with depths down to 434 feet; NSF/ANSI 372 certified for potable water

BUILT-INS: built-in check valve help keep pump from rapid cycling and extends the motor life; built-in suction screen helps keep debris out protecting the impellers

1 HP MOTOR: 2-wire, 230-volt motor (not including the ground wire) rated for 12 GPM and draws water from 434 ft. (at 50 PSI delivers 12 GPM at a draw down of 334 ft.)

SUBMERSIBLE DEEP WELL PUMP: 3.9-inch diameter well pump fits 4-inch diameter driven wells or larger wells with depths down to 212 feet; NSF/ANSI 372 certified for potable water

BUILT-INS: built-in check valve help keep pump from rapid cycling and extends the motor life; built-in suction screen helps keep debris out protecting the impellers

1/2 HP MOTOR: 2-wire, 230-volt motor (not including the ground wire) delivers up to 12 GPM and draws water from 212 ft. (at 50 PSI delivers 12 GPM at a draw down of 212 ft.)

SUBMERSIBLE DEEP WELL PUMP: 4″ submersible deep well pump is ideal for use in 4″ i.d. or larger wells from depths of 100 feet and it is powered by 3-wire, franklin electric motor.

DEEP WELL PUMP: Hex rubber bearing with extra large surface assures shaft stability and multiple flow channels keep small particles such as sand away from bearing surfaces.

½ HP WELL PUMP: Built-in check valve prevents backflow and ensures system pressure. built-in suction screen and 1-1/4″ npt thermoplastic discharge head helps to prevent debris from clogging impellers and provides full.

BUILT TO LAST: Rugged cast iron pump housing and glass-filled thermoplastic impeller for well water and lake water

DUAL VOLTAGE MOTOR: 115/230 Volts; pump is factory set at 230 Volts but can be easily switched to 115 Volts; always match the pump's voltage to the source voltage

ONE-TIME PRIMING: No additional priming is required after initial fill; follow the priming instructions in the owner's manual

SUBMERSIBLE DEEP WELL PUMP: 3.9-inch diameter well pump fits 4-inch diameter driven wells or larger wells with depths down to 333 feet; NSF/ANSI 372 certified for potable water

BUILT-INS built-in check valve help keep pump from rapid cycling and extends the motor life; built-in suction screen helps keep debris out protecting the impellers

3/4 HP MOTOR: 3-wire, 230-volt motor (not including the ground wire) delivers up to 12 GPM and draws water from 333 ft. (at 50 PSI delivers 12 GPM at a draw down of 293 ft.)

Red Lion repair kit

Gasket/hardware kit

See illustration for parts

SUBMERSIBLE DEEP WELL PUMP: 3.9-inch diameter well pump fits 4-inch diameter driven wells or larger wells with depths down to 260 feet; NSF/ANSI 372 certified for potable water

BUILT-INS built-in check valve help keep pump from rapid cycling and extends the motor life; built-in suction screen helps keep debris out protecting the impellers

1 HP MOTOR: 3-wire, 230-volt motor (not including the ground wire) delivers up to 22 GPM and draws water from 260 ft. (at 50 PSI delivers 22 GPM at a draw down of 219 ft.)

1/2 HP SHALLOW WELL JET PUMP: can draw up to 7.4 GPM; ideal for cottages or homes with one bathroom; design for wells down to 25 feet

BUILT TO LAST: RUGGED cast iron casing and volute for long life; glass-filled thermoplastic impeller and diffuser for durability

DUAL VOLTAGE: runs on either 115 or 230 volts; voltage must be selected to match incoming power source; CSA listed in the USA and Canada; certified for potable water

ALL-IN-ONE WELL PUMP SYSTEM: jet pump and pre-charged pressure tank are factory assembled and ready to install

BUILT TO LAST: heavy-duty cast iron casing and volute; glass-filled thermoplastic impeller and diffuser; steel tank with high-grade diaphragm water chamber

INCLUDES: 30/50 pressure switch, pressure gauge, stainless steel hose

SHALLOW WELL JET PUMP: for wells less than 25-feet deep; includes 30/50 pressure switch; self-priming after initial prime; 3/4 HP pump can draw up to 13 GPH

DUAL VOLTAGE: 115/230 Volt heavy-duty motor, comes factory-set for 230 Volts but can easily be switched to 115 Volts; voltage must be selected to match incoming power source

BUILT TO LAST: Heavy-duty cast iron construction for years of service and reliability; impeller and volute made of glass-filled polyester

SHALLOW WELL JET PUMP: for wells less than 25-feet deep; includes 30/50 pressure switch; self-priming after initial prime; 1/2 HP pump can draw up to 12.6 GPH

DUAL VOLTAGE: 115/230 Volt heavy-duty motor, comes factory-set for 230 Volts but can easily be switched to 115 Volts; voltage must be selected to match incoming power source

BUILT TO LAST: Heavy-duty cast iron construction for years of service and reliability; impeller and volute made of glass-filled polyester

SHALLOW WELL JET PUMP: for wells less than 25-feet deep; includes 30/50 pressure switch; self-priming after initial prime; 1 HP pump can draw up to 17 GPH

DUAL VOLTAGE: 115/230 Volt heavy-duty motor, comes factory-set for 230 Volts but can easily be switched to 115 Volts; voltage must be selected to match incoming power source

BUILT TO LAST: Heavy-duty cast iron construction for years of service and reliability; impeller and volute made of glass-filled polyester

APPLICATIONS: manual water pump for in and around the home such as flood removal, emptying aquariums, transferring water from rain barrels, and removing standing water

PORTABLE DESIGN: lightweight engineered thermoplastic design, and built-in handle makes this pump very portable; 5.5 inches in diameter; 10-inches tall; 6 lbs

CONNECTS TO STANDARD 3/4-inch GARDEN HOSE: 1-inch MNPT discharge and comes with a 3/4-inch GHT adapter which fits standard 3/4-inch garden hoses

APPLICATIONS: manual water pump for in and around the home such as flood removal, emptying aquariums, transferring water from rain barrels, and removing standing water

PORTABLE DESIGN: lightweight engineered thermoplastic design, and built-in handle makes this pump very portable; 5.5 inches in diameter; 10-inches tall; 7 lbs

CONNECTS TO STANDARD 3/4-inch GARDEN HOSE: 1-inch MNPT discharge and comes with a 3/4-inch GHT adapter which fits standard 3/4-inch garden hoses

BUILT TO LAST: Premium stainless steel and cast iron sump pump built for aggressive water conditions

CLOG-RESISTANT DESIGN: capable of passing 3/4-inch semi solids; for sump or effluent use

PIGGY-BACK TETHERED FLOAT SWITCH: allows pump to easily be switched to manual mode for testing or emergency water removal

VERSATILE: The Red Lion SCV114 check valve can be used on 1-1/4-inch OR 1-1/2-inch PVC or ABS pipe; must be installed vertically

REVERSABLE ADAPTERS: Two reversable adapters included; each has 1-1/4-inch slip fitting on one end and 1-1/2-inch slip fitting on the other end

DURABLE: Made of ABS; clamps are stainless steel; flow direction is etched into check valve

Dual automatic submersible sump pumps

Pre-assembled piping and check valves included

Maximum head of 25',010' power cord

BUILT FOR AGGRESSIVE WATER CONDITIONS: Stainless steel pump housing is corrosion-resistant

SHALLOW WELL JET PUMP: ideal for the supply of fresh water to rural homes, farms and cabins with suction lifts less than 25-ft

Includes factory pre-set 30/50 pressure switch - produces up to 50 PSI with automatic shut-off

APPLICATIONS: automatic submersible pump designed for basement sump systems and light effluent applications

BUILT TO LAST: heavy-duty cast iron construction for rapid heat dissipation and extended life; clog-resistant design capable of passing 1/2-inch semi-solids; CSA listed in USA and Canada

AUTOMATIC OPERATION: snap action switch comes on when water reaches 8 to 11 inches and shuts off when water falls between 2 and 5 inches; steel rod protects switch from hitting side of basin

APPLICATIONS: Convertible jet pump with deep well injector designed for shallow wells down to 25-feet or deep wells down to 90 feet; perfectly suited for cottage or small home

BUILT TO LAST: rugged cast iron casing and injector (included); glass-filled thermoplastic impeller and diffuser

DUAL VOLTAGE: Heavy-duty motor, runs on either 115 or 230 volts; factory set to 230 Volts, voltage on pump must be selected to match incoming power source; CSA listed in USA and Canada

79% ACRYLIC

Heel and Toe Construction

Sporty, Comfortable Design Great for Many Sports

AUTOMATIC OPERATION: built in switch checks for water every 3 minutes, when water exists pump turns on otherwise pump will wait another 3 minutes and check for water again

APPLICATIONS: manual water pump for in and around the home such as flood removal, emptying aquariums, transferring water from rain barrels, and removing standing water

PORTABLE DESIGN: lightweight engineered thermoplastic design, and built-in handle makes this pump very portable; 5.5 inches in diameter; 10-inches tall; 7 lbs

APPLICATIONS: removal of effluent water (grey water) in effluent or septic systems, emergency water removal, irrigation, or general dewatering

BUILT-IN CHECK VALVE: keeps pump primed after initial prime; see owner's manual for priming instructions

HEAVY-DUTY MOTOR: 115/230 volts, comes factory set to 115 volts but can easily be changed to 230 volts; voltage selector must be changed to match incoming voltage; CSA listed in the USA and Canada

SUBMERSIBLE DEEP WELL PUMP: 3.9-inch diameter well pump fits 4-inch diameter driven wells or larger wells with depths down to 434 feet; NSF/ANSI 372 certified for potable water

BUILT-INS built-in check valve help keep pump from rapid cycling and extends the motor life; built-in suction screen helps keep debris out protecting the impellers

1 HP MOTOR: 3-wire, 230-volt motor (not including the ground wire) rated for up to 12 GPM and draws water from 434 ft. (at 50 PSI delivers 12 GPM at a draw down of 334 ft.)