Best Reliance Controls in 2026

Material Type: Powder Coated Steel

Convenient transfer switch kit, ideal for your circuitry and multi-wiring needs, is also made for reliably-fast installation in both residential and commercial applications

Designed specifically for generators up to 7,500 maximum running watts

18-inch flexible conduit whip attaches easily to the load center

For indoor or outdoor use with specific transfer switches, manual transfer panels and generator-ready load centers

Outdoor, raintight NEMA 3R non-metallic power inlet box

Maximum generator running watts: 12,500

Reliable heavy-duty cord set with molded ends

Thick cord designed specifically for generators up to 7,500 maximum running watts

Transfer switch accessory also for use with Reliance Controls transfer panels and power inlet boxes

Heavy-duty, 20-foot product

Perfect for connecting a generator and a transfer switch with a single cord

Sets with molded ends

Durable power cord

Ideal for connecting a generator and a transfer switch with one single cord

Maximum generator running watts: 12,500

Power transfer kit, create a back up power panel inside your home, connected to your portable generator outside your home, to keep you safe from storm weather & toxic generator exhaust

Includes 6 circuit power panel, 30a outdoor power cord inlet box, NM PVC Conduit

Fittings & PVC cement, 12 inch x 1 inch flat head drill & all mounting accessories

Includes full manufacturer warranty

4 gallon (15 liter) Aqua-Trainer rectangular rigid water container that is BPA free

Space-saving rectangular design for each storing and stacking.

Molded contour grip

Outdoor, NEMA 3R transfer switch

Easy to install, easy to use. MAX. COMBINED LOAD @ 125 VAC - 40

Maximum generator running watts: 5,000. Power inlet, NEMA is L14-20

Reliable 120-volt outlet power failure alarm

8-hour LED backup light

Alarm sounds when power fails

Designed to allow you to program up to 7 On/Off events and repeat them weekly (for loading control of lights, fans, pumps, and other medium-duty loads)

Has a built-in rechargeable battery and a single throw pole switch

Incandescent and fluorescent, with a motor running at: 1/4 HP, 60Hz, 125 VAC

Energy-efficient, mechanical timer designed to replace any standard wall switch

Automatically limits the ON time to fifteen minutes for fans, lighting and other appliances

Single-pole, single-throw switch requires no neutral wire for operation

Energy-efficient, mechanical timer designed to replace any standard wall switch

Automatically limits the ON time to fifteen minutes for fans, lighting and other appliances

Single-pole, single-throw switch requires no neutral wire for operation

Intuitive LED safety light operates only when motion is detected and the ambient light level is low

Perfect for bathrooms, basements, stairways, closets and any area you wish to instantly illuminate

Battery-efficient operation for up to 30,000 on/off cycles or 250 hours of cumulative light

Transfer switch made for reliably-fast installation in both residential and commercial applications

Designed specifically for generators up to 7,500 maximum running watts

18-inch flexible conduit whip attaches easily to the load center

Hose Length: 10.00 Feet

Power Source Type: Corded-Electric

Weather Resistant – Protect your generator from sun and UV damage, rain, snow, dirt and more with this cover’s tough vinyl exterior

Secure – The strong elastic base provides a secure, custom-like fit for your generator

Versatile – This cover is designed for 4800-11,500-watt generators, but will also fit generators up to 30.7 x 23.6 x 23.6-inches in size

Material Type: Powder Coated Steel

For indoor or outdoor use with specific transfer switches, manual transfer panels and generator-ready load centers

Outdoor, raintight NEMA 3R non-metallic power inlet box

Maximum generator running watts: 12,500

Powerful - Converts a 30-amp locking outlet to three 15-amp household outlets and extends your power up to 25 feet

Weather Resistant - Service grade, abrasion and weather-resistant insulation, plus the included dust covers keep your outlets clean and clear

Flexible - The cold and heat resistant, 10-gauge wire stays flexible in extreme temperatures and is rated for 125-volt use

SURGE PROTECTOR BREAKER Will not burn your device,and keep your appliance safe with over-voltage surge protector breaker.

HEAVY DUTY 4 x10 SJTW gauge cable can run the max wattage of 7500 watts,power of 30 Amp 125/250 volts,a good generator adapter for emergency using.

CABLE SPLITTER L14-30P to 4 NEMA5-20R socket,1 cable to 4 way.

Reliable heavy-duty cord set with molded ends

Thick cord designed specifically for generators up to 7,500 maximum running watts

Transfer switch accessory also for use with Reliance Controls transfer panels and power inlet boxes

30 amp Inlet Box:NEMA L14-30 twist-lock style power generator inlet box working at 125/250V,rating to 7,500 watts,equipped with enough wiring space and the face cover of the inlet box is removable for fast wiring access and installion.

Pre-drilling 4 Way Connection Options:There are knockouts on the back,bottom,left side and right side.It can be removed easily without damaging the box.Run the wiring to transfer switch or electric panel.

Weatherproof & Durable:Raintight and rustproof metal cover is suitable for outdoor mounting.

Generator Power Inlet Box: Power inlet box is an outdoor/watertight electrical inlet for a 50 Amp SS2-50 generator cord. 125/250V, 12500W. It is designed to be installed outdoors in an open area where the generator is being used and perfect for backup power during a power outage.

Safety Assurance: It is designed to be located outdoors where the generator is running to prevent dangerous carbon monoxide fumes from the generator from entering your house. This inlet box is then safely hardwired through an outside wall directly to the transfer switch or panel, eliminating the need for cords running through windows or doors. Our generator power inlet box passed the certifications of ETL.

Best Space Design & Easy to Install: Compared with ordinary boxes, we have increased the wiring space by 50%. There are generous wiring space and facilitates through-in. The front of the box is removable for easy placement and wiring.

HIGH QUALITY: Durable PPO Material.It is light, portable and easy to use.

EXCELLENT WATERPROOF FUNCTION: Degree itself of protection: IP67.

CONVENIENT: It does not need extra instruments for the removal of plugs and removal will not cause any harm to plugs.

The IGAN Advantage: Run your generator safely, whether in the rain, snow, high winds, or wet weather.

Patented Design: Ensure the sensitive sections of the machine are 100% well-protected. Easy to assemble and won't take up too much space.

Ultra heavy duty: 100% waterproof tarp, weighing up to 9 pounds, can be used as storage and running cover.

Made of durable 600D polyester fabric with a PVC coating.Fit generators measuring up to 31" Lx 29" Wx 28" H

Elastic adjustable cord in bottom hem for slip-on fit

Covered air vents let air circulate, reducing inside condensation and wind lofting

1.The IGAN Advantage: Run your inverter generator safely whether in rain, snow, high winds or wet weather.

2.Patented Design: Ensure the sensitive sections of the machine are 100% well-protected and maintain its natural cooling airflow & mobility.

3.Easy to assemble, no tools needed, fits for most 1000~2300 watt inverter generator.

🛡️This Rain-Tight, Rust-Proof Unit Includes An NEMA L14-30P Inlet Plug, Six Knockout Holes, And Push-In Wire Connections

🛡️Power Inlet Box Is An Outdoor/Watertight Electrical Inlet For A 30 Amp L14-30 Generator Cord

🛡️The Rain Tight NEMA 3R PBN-Series Steel Power Inlet Box Is Designed For Use With Pro/Tran Transfer Switches, Panel/Link Transfer Panels And Generator-Ready Load Centers