Best Remflex in 2026

1-7/8" Diameter Round Port; Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set

Port configuration comparable to Fel-Pro 1440

Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite

3" Pipe; Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set

Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite

Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch

1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port; Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set

Port configuration comparable to Fel-Pro 1404

There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts

Matches the Stock Cylinder Head Port; AMC V8 - 304('70-'79), 360('70-'93), 390('70), 401('71-'76), Dog Leg Stock Port, Manifold or Headers, 2/Set

Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite

Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch

1-1/8 inch width x 1-1/2" height Stock Square Port; Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set

Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite

Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch

Remflex’s unique flexible graphite material has been proven for more than 30 years

1-7/32 inch width x 1-25/32 inch height Square End Ports; Mopar V8 - Magnum 318 ('92-'02), 360 ('93+), Square End Ports, Manifold or Headers, 2/Set

Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch

1-9/16 inch width x 2-5/16 inch height Square Port; Ford V8 - FE 352, 390, 410, 428 (includes Tbird and Cobra Jet), Manifold and Some Headers, 2/Set

Includes Thunderbird 1961 - 1964

There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts

2-1/2" Pipe; Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set

Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite

Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch

Remflex’s unique flexible graphite material has been proven for more than 30 years

1-7/8 inch width x 1-3/8 inch height Square Port; Mopar V8 - 361, 383, 400, 413, 426 Wedge, 440, 1-7/8" x 1-3/8" square Port, Manifold or Headers, 2/Set

Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch

See Part Number 6006 for 2-1/4" Pipe Flange; Mopar Exhaust Collector Gasket 2-1/2" Pipe, 2 Bolt Holes (One slotted) 3-29/32" Bolt Hole Spacing, 2/set

Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite

Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch

1-1/2" Diameter Round Port; Ford V10 - Triton, 6.8L ('97-'12), 1-1/2" Round Port, Manifold or Headers, 2/Set

Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite

Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch

Remflex’s unique flexible graphite material has been proven for more than 30 years

1-15/16 inch width x 1-3/8 inch height D-Shaped Port; Mopar V8 - Hemi 370/6.1L ('05-'10), D-Shaped Port 1-15/16" x 1-3/8", 2/Set

Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch

See Part Number 6005 for 2-1/2" Pipe Flange; Mopar Exhaust Collector Gasket 2-1/4" Pipe, 2 Bolt Holes, 3-1/2" Bolt Hole Spacing, 2/set

Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite

Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch

Reflex's unique flexible graphite material has been proven for more than 30 years

Package Dimension : 11 inches L x 6.5 inches W x 0.3 inches H

Country of Origin: UNITED STATES

1-13 inch width x 1-7/8 inch height Square Port; Chevy V8 - BB 396/6.5L, 402/6.6L, 427/7.0L, 454/7.4L ('65-'90), Stock Port, Manifold or Headers, 2/Set

Port configuration comparable to Fel-Pro 1410

There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts

1-1/8 inch width x 1-3/4 inch height D Shaped Center Ports; Pontiac V8 - 326, 350, 370, 389, 400, 421, 428, 455, Port Match to Head, Manifold or Headers, 2/Set

1-3/8 inch width x 1-13-16 inch height Oval End Ports

There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts

Two 1-1/2 inch width x 1-29/32 inch height Divided Center Ports; Oldsmobile V8 - 260, 307, 330, 350, 350, 400, 403, 425, 455 ('64-'90), Headers Only, 2/Set

1-7/16" wide x 1-15/16" high Square End Ports

There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts

1-1/4 inch width x 1-5/8 inch height Large Square Port; Ford V8 - 289-351 Windsor, Large Square Port, (Aftermarket Cylinder Heads - 2" BH Spacing), 2/Set

For use with Aftermarket Cylinder Heads with 2" Bolt Hole Spacing on each port

There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts

Remflex’s unique flexible graphite material has been proven for more than 30 years

4.0L (1990-1998) plus (Cherokee, Comanche and Wagoneer 1987-1990), 1(each), Heating and cooling of the exhaust system causes header and manifold flanges to warp

Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch

Reflex's unique flexible graphite material has been proven for more than 30 years

Fits Edelbrock Performance RPM Heads and Others

1-1/4 inch width x 1-3/4 inch height Square End Ports; Mopar V8 (Pre Magnum), 318, 340, 360 ('68-'92), Headers, 2/Set

1-1/4 inch width x 2-3/32 inch height Oval Port; Ford V8 - 429 ('68-'73), 460 ('68-'87), (Except Cobra Jet) Oval Port, For Carbureted Engines, 2/Set

Not for fuel injected engines

Manifold or headers

Remflex’s unique flexible graphite material has been proven for more than 30 years

Port configuration comparable to Fel-Pro 1404/1405

Popular for aftermarket aluminum heads AFR, Dart and others

Driver Side (Part A) Only; GM GMC truck/SUV/Hummer LS ('99-'12), Header/Manifold -to-Exhaust Pipe, Driver Side, 1(each)

There are no rubber binders or composite materials in Remflex Exhaust Gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts

Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite

Fit type: Universal Fit

1-1/2" Round Port; Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6/6.0L- LS1, LS2 Vortec, 1-1/2" RP, For Weld Bead Headers, 2/Set

For use with raised weld bead headers; additional sealing material is provided around the weld bead to provide a better seal

1-3/4" Round Port; Chevy V8 - 396, 402, 427, 454 ('65-'90), 1-3/4" Round Port, For Raised Weld Bead Headers, 2/Set

There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts

For use with raised weld bead headers; additional sealing material is provided around the weld bead to provide a better seal

Both Driver Side (Part A) and Passenger Side (Part B) Gaskets; GM - GMC truck/SUV/Hummer LS ('99-'12), Header/Manifold -to-Exhaust Pipe Flange, 2 Piece Set

There are no rubber binders or composite materials in Remflex Exhaust Gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts

Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite

Stock Port; Chevy L6 - OHV 216.5 ('37-'53), 235 ('50-'63), 261 ('55-'62), One Piece, Manifold or Headers, 1 (each)

Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite

Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch

1-9/16" Diameter Round Port; Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, ('55 - '00), Round Port, Headers, 2/Set

Port configuration comparable to Fel-Pro 1426

There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts

2 inch width x 1-7/8 inch height Irregular Shape Stock Sport; Chevy V8 - GMC BB 454/496/502 Gen. Mark (IV,V,VI),('91 and Newer), Manifold or Headers, 2/Set

For use with stock cast iron and GM Performance aluminum cylinder heads

There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts

Remflex’s unique flexible graphite material has been proven for more than 30 years

1-1/8 inch width x 1-27 inch height Oval Port; Ford V8 - 289 ('63-'68), 302 ('69-'80), 1-1/8" x 1-27/32" Oval Port, Manifold or Headers, 2/Set

Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch