Best Replacementscrews in 2026

STAINLESS STEEL: No Rust, No Oxidation with these Grade 18-8 / A2 Stainless Steel Bolts. Black Oxide Finish for a Great Look. These Screws will Outlast Your Car.

MEDIUM LENGTH: These 8mm long M5 Screws are 2mm Longer than the OEM Screws to Account for a Frame. For Frameless Installation, Take Care Not to Damage the Paint When Installing if the Screw Protrudes Behind The Bracket.

PHILLIPS PAN HEAD: Installs with a Regular Phillips Screwdriver. No Special Tools Needed.

STAINLESS STEEL: No Rust, No Oxidation with these Grade 18-8 / A2 Stainless Steel Bolts. Black Oxide Finish for a Great Look. These Screws will Outlast Your Car.

MEDIUM LENGTH: These 8mm long M5 Screws are 2mm Longer than the OEM Screws to Account for a Frame. For Frameless Installation, Take Care Not to Damage the Paint When Installing if the Screw Protrudes Behind The Bracket.

PHILLIPS PAN HEAD: Installs with a Regular Phillips Screwdriver. No Special Tools Needed.

M4 10mm Length is Standard for Mounting Most Monitors and Many Small LCD/LED TVs (Usually 32" and Below). Consult your manual prior to purchase for correct length information.

Compatible with most 75x75mm and 100x100mm wall mount hole patterns. Any TV / Monitor Brand.

One set of metric screws.

COMPLETE SET: One set of 4 metric M8 x 43mm screws (Behind bracket length, per specs. Actual length 50mm). Nylon spacers, flat and spring lock washers, are all included in purchase.

CORRECT SPACERS: Extra long spacers that substitutes for BN61-13518A / BN96-43169A. These spacers are of the exact same length, and full compatible with the Samsung OEM adapters.

SPECIFICATION: Exact C-Measure of 43 ~ 45 mm (Check your TV manual). These bolts are designed to give you the correct C-Measure once installed. The C-Measure is the insertion depth behind the TV mount bracket into the TV.

Fully compatible replacements plastic inserts and screws for IKEA #102267 & #105163

These will fit your furniture if your assembly manual calls for IKEA part #102267 and #105163.

Fits many MALM beframes, SONGESAND, HEMNES and more

Fully compatible replacements plastic inserts for IKEA #102267

These will fit your furniture if your assembly manual calls for IKEA part #102267.

Fits many MALM beframes, SONGESAND, and more

Four Strong Black Nylon Machine Screws For attaching the REAR license plate. The Screws are Long enough for thick frames.

Will Fit if Your Car has threaded M6 License Plate Screw Holes About 3/4" deep.

Fits Toyota RAV4, Camry, 4Runner, Corolla, Prius, Highlander, Sienna, Land Cruiser, Avalon, Matrix, MR2, Spyder, FJ Cruiser, Tacoma, Venza, Yaris, Sequoia And More.

COMPLETE SCREW SET: This versatile kit includes all 4 screws, split lock washers and extra large flat washers needed to mount your TV.

CORRECT SIZE: The length and thread of the screws / bolts are designed to be compatible with securely mounting a Vizio V505-G9. However, it's important to consult your manual prior to purchase to ensure the correct length for your specific equipment.

SAFE INSTALLATION: Flat washers and split lock washers provide the right amount of grip. The split lock washers exert pressure against the mounting surface and screw, preventing them from backing out or becoming loose over time due to vibrations.

COMPLETE SET: One set containing 4 metric VESA compatible M8-1.25mm pitch screws, 4 nylon spacers, flat and spring lock washers. You will receive exactly what's shown in the product photos.

CORRECT LENGTH: 18-20mm is length BEHIND bracket, NOT length of bolt/screw. This kit is designed to give you the correct C-Measure once installed. The C-Measure is the insertion depth behind the TV mount bracket into the TV.

COMPATIBLE: Compatible with all Samsung TVs specifying M8 18-20mm 1.25mm pitch. For non-standard bracket thickness, the included washers and spacers provide multiple options.

COMPLETE SCREW SET: The kit contains all the screws needed to attach the original factory legs/stand to your TV and to assemble the stand itself, if applicable. You will receive One set of metric screws, four screws in total. Four black self-tapping screws. Please verify the model number 55UN7000PUB on the TV's back label for compatibility.

CORRECT SIZE / THREAD: The screws are perfectly sized and threaded to ensure full compatibility with your LG 55UN7000PUB base stand / legs. The coarse self-tapping screws are designed to go into plastic holes or receivers using minimal torque.

BLACK OXIDE PLATING: Like the OEM screws, these screws are black oxide plated, which not only makes them resistant to corrosion but also gives them a sleek, modern appearance. It matches the color of the TV, creating a professional appearance.

One set of metric screws.

Four screws in total.

For attaching the TV to a wall mount bracket.

COMPLETE SCREW SET: This versatile kit includes all 4 screws, split lock washers and extra large flat washers needed to mount your TV.

CORRECT SIZE: The length and thread of the screws / bolts are designed to be compatible with securely mounting a Vizio D32h-G9. However, it's important to consult your manual prior to purchase to ensure the correct length for your specific equipment.

SAFE INSTALLATION: Flat washers and split lock washers provide the right amount of grip. The split lock washers exert pressure against the mounting surface and screw, preventing them from backing out or becoming loose over time due to vibrations.

Desktop office stapler that holds up to 210 staples; 25 sheet stapling capacity

1250 staples included in the package; the staples have a standard 1/4 inch leg length

Can be opened 180° for tacking info to a bulletin board; rotatable anvil provides two stapling models: Temporary Stapling and Permanent Stapling

UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 12 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.

SAVE TIME AND MONEY - You can find 240PCS automotive push type retainer kit in the box and no need to go to a auto parts store to look for different fasteners. You can remove the old clips using free fastener remover.

HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.

FOR TOUGH APPLICATIONS: Heavy duty VELCRO Brand strips with adhesive securely fasten to smooth surfaces including plastic, metal, painted wallboard

LONG LASTING DURABILITY: Industrial strength VELCRO Brand strips feature a special sticky back adhesive to provide a secure and long-lasting hold

NO TOOLS REQUIRED: No hammer, drilling or nails necessary, industrial strength VELCRO Brand fasteners feature an easy peel and stick application

Frosted finish, unreflective surface.

4 hole sizes from 6.3mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).

6 different push pin rivet for ATV & many brand vehicles.

UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 6 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.

SAVE TIME AND MONEY - You can find 200PCS automotive push type retainer kit in the box and no need to go to a auto parts store to look for different fasteners.

HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.

Brand New Engine Splash Shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment.Fit Type: Universal

The extruded U-nuts can be used to replace/fix to the bumper

The clips are widely used for radiator yoke trim panel door trim door panel bumper car fender flare side skirt grille wheel well air intake engine cover mud flap and splash guard shield retainers rivet clips replacement

CLASSIC BRASS FASTENERS – Fasteners provide an effective, easy way to hold your documents together. They're brass plated to extend life, protect against corrosion and add an attractive shine.

1/2" PRONGS – Strong, 1/2" brass-plated prongs with self-piercing points easily penetrate paper to hold securely. Attractive, circular heads with a 5/16" diameter provide a neat presentation.

SECURE FASTENING – Sleek, sturdy fasteners are sure to become an office staple. They neatly and securely hold papers. Larger heads make them easy to use, and brass gives them an appealing shine.

WHAT’S IN THE PACKAGE: The United Pacific Chrome Bullet License Plate Fastener set includes 4 bullet fasteners and matching thread size nut, split lock washers, and flat washers. This is for a set of 4 of our Bullet License Plate Fastener screws. (NOTE: These are universal and can fit motorcycles but modifications to the bolt (cutting) may be necessary).

SPECIFICATIONS: Our United Pacific Chrome Bullet License Plate Fastener screw pack consist of 1 set (4 units) of license plate fastener with your order. Each of the chrome bullet fastener screws measures at 2 inches (overall length) with a 1-inch-long stud measuring Metric M6 x 1.0 treads. The bullet section measures at 3/4” x .3/4”.

EXTRA INFORMATION: The United Pacific Chrome Bullet License Plate Fastener installation is quite simple. It should be able to fit all standard US license plate screw holes on your vehicle. The chrome fastener screws have gone through our triple chrome plating process giving you that beautiful shine.

10-pack of sturdy classification file folders with fasteners and 2 dividers

Fits letter size 8.5-inch x 11-inch paper; 2-inch expansion allows bulky documents or file collections

2/5-cut tab right of center for easy folder labeling; 2 internal tabbed dividers help classify and organize documents

Simplistic yet powerful, say it with a Daisy

Hand painted to show off the detail of a yellow and white daisy

Durable zinc die cast metal frame is chrome plated, carefully hand polished and hand painted

25 twin-pocket folders made of standard-grade paper for durability

Built-in, 2-prong fasteners hold 3-hole punched sheets; folders hold up to 135 sheets of letter-size paper

Inside business-card holder keeps contact info close at hand

50 letter-size fastener file folders

2 secured fasteners to keep you paper secure and organized

1/3 cut reinforced tab for clear identification

Complete 2-piece fastener includes prong base and compressor

Ideal for use in file folders that need to be modified or added to frequently

Both bases and compressors are made of brightly finished, corrosion-resistant steel

4 Custom Knurled Billet Aluminum Custom Logo Motorcycle License Plate Frame Tag Bolts For Most Motorcycle Models With Through Hole Mounting Brackets Like Harley, Honda, Ducati, Kawasaki, Victory,Indian & Many More Makes

Features: Black Anodized Aluminum Finish Knurled Sides Large 1/4" Tall By .8" Round Billet Aluminum Head Custom Graphic Logo Steal Treaded Stud x 3/4" Long . No tools required to install with included wing nut fastener. MADE IN THE U S A

Logo Features: High Resolution Graphics Printed on 3M Automotive Grade Vinyl Gel Top Polyeurethane Domed Sealed Graphics UV & Fade Resistant Graphics Scratch & Water Resistant Graphics Logo Size 3/4" Pre-installed for you by us

CUSTOM FIT - License plate bracket is suitable for following vehicle models: for Mercedes-Benz 2007-2023. Save money on fines! Bracket size (6" x 12") fits US & Canada license plates & won't cover license plate or registration sticker.100% street legal

HIGHEST QUALITY - The license tag holder is made of premium & heavy-duty plastic, which is totally rust-proof, anti-wear, & corrosion-resistant. The metal license plate doesn't directly contact the car paint surface, so it won't lead to scratches!

KIT INCLUDES- 8 secure screw bolts. Bracket has 4 mounting holes, one in each corner to hold plate secured. May require drilling holes in bumper if existing holes far apart from each other. NO EXTRA TOOLS REQUIRED! Wrench is included w every bracket!

[No drilling or adhesives] No need to drill into your Model Y bumper or mess around with double-sided tape! Our license plate bracket installs and detaches in seconds. Simply turn a knob to expand the "paws" and engage the top and bottom surface of the grill, without squeezing or stressing grill veins.

[Fits Model Y - All Model Years] We've worked with friends and family and local dealers to make sure this license bracket fits all Fremont-produced Model Ys, from 2020 up to the latest 2023 model year.

[Install or remove in seconds] Toolless installation and removal. Line up the license plate holder to the middle of the grill, and turn the front knob to install. Unique ratchet mechanism prevents bracket from coming loose during prolonged use.

Packing: 1000pcs

Color: Whtie

Size: The polyester string is approximately 7 inch in length, the plastic lock is approximately 0.4 inch in length, 0.3 inch in width

Put the final touch on a novelty/license plate frame with a set of chrome fastener caps

Eliminates the visibility of the fastener and completes the look of your license plate

Fastener caps are chrome plated plastic and designed to fit all novelty/license plates