Best Rgbzone in 2026

Length:1M , 2pcs extension cable with 4pcs 4pin connector free.

Extension Connecting Cable for 5050 3528 SMD RGB LED Strip Lights

A perfect solution for connecting led strip with controller or strip to strip connection

Length:2M , 2pcs extension cable with 4pcs 4pin connector free

Extension Connecting Cable for 5050 3528 SMD RGB LED Strip Lights

A perfect solution for connecting led strip with controller or strip to strip connection

▶Fit for RGB LED Strip Light: Suitable for 5050,3528,2835 RGB led strip light 4 pin.

▶44 Keys Remote Controller: It has 20 static colors, adjust brightness, 8 control modes : Static/ Flash/ Strobe/ Fade-change/ RGB Smooth-change.

▶DIY Mode: 6 DIY modes to mix all your colors you want, give you an ultimate enjoyment.

These JST SM 2 Pin Connector can be widely used on most mini RC helicopter,indoor 3D plane,LED Light Strip,good for connecting motor, battery & ESC.

Widely use for LED strips, LED wall-washers, LED underground light, LED belt light, curtain light, twinkle light and so on.

These 2 pin jst connectors are matched, connect reliable,easy and convenient to install.

Package Content: 20 pairs 5pin JST SM Connector (20pcs male+20pcs female)

Product No: JST SM 5 pin plug

Length: Approx 300mm two plug together

What You Get: 20 pairs 3 pin JST SM male female plug LED connector cable.

Used for: WS2811 WS2812B WS2814 SK6812 etc.. 3 pin LED strip, LED bulb, low voltage LED project.

Wire Gauge Rating: 22AWG

Applications: These 3pin led extension cables are perfect for connect or extension of your WS2812b WS2811 dream color LED strip lights or as a connection between connector and lights.

Premium Material: Our led strip extension cable are made of multi copper core who are wrapped in upgraded PVC,so they have high conductivity , low resistance and anticorrosive. Voltage: 0-300V; Rated current: 0-2A.

Easy to Install: The 3pin wire is easy installed to dream color LED strip lighting system. Reliable connect,good performance and convenient to cut and weld according to your needs to be a superior connection between connector outputs to signal transmission amplifier.

Aplication : Enables you to connect 4pin 5050/3528 RGB light LED flexible strips to a single controller.

Usage : 1 end to connect with LED RGB controller, the other ends for 2 Reel LED RGB strips.

Feature : Easy to install, connecting strip to strip, strip to controller

20 pcs Male 4 Pin JST SM Connector Wire + 20 pcs Female 4 Pin JST SM Connector Wire

Length: Male about 15.5cm; Female about 14.5cm; Wire gauge: 22AWG

Material: PVC plastic&metal; Color: Blue Red Green Black

➤Input Voltage：DC5V/DC12V/DC24V; Output current：<2A/CH max:6A. (DC12V LED strip, please use D12V power supply.)

➤Two Ways to Adjust the Brightness: one is to select the brightness quickly(25%,50%,100%), and the other one can be adjusted to your preferred brightness according to "brightness+ and brightness-", providing optimal dimming, suit for different romantic atmospheres.

➤Controllable Distance: In open areas within 15-20 meters, the controller can be invisible, no need to point to the controller.

Material : Pure copper wire,PVC,Good conductivity,can be used repeatedly

Cable length : 8pcs * 25cm（9.84inch）, 8pcs * 20cm（7.87inch）, 16pcs * 15cm（5.90inch）, 98pcs * 10cm（3.94inch）, Total130pcs

Quality : 24 AWG Electronic Wire with Dupont Plastic Endpiece， makes it easy to use

Premium Material:Our led strip lights extension cable are made of multi copper core who are wrapped in upgraded PVC,so they have high conductivity , low resistance and anticorrosive

Can be Used as：These rgb led extension cables are perfect for connect or extension of LED RGB strip or as a connection between connector and RGB lights.(can be use for 4Pin RGB led strip lights)

Perfect Role:When your light strip has a certain distance from your power, when you don't need the distance of the lamp strip, these cables will help you perfectly solve these embarrassing distance

➤App Control Via Blueyooth: Smart APP control, compatible with IOS and Android systems. 40 keys IR RGB music remote. You can also use our RGB music remote control to control the lights.

➤Unlimited Colors Mode: Your RGB strip Light will have more colors than RGB. With 16 millions of colors in multi modes to choose. Gradual Color Changing, Jumping color changing, Music beat changing. You can DIY and change to the color you love or dim to any color fitting for your mode.

➤Music Sync Mode: With this controller, the colors of your LED strip lights can be changed according to the beat of music by a Mic receiver. With the sensitive Mic mode, light will sync with any music / sound / voice.

Aplication : Enables you to connect 4pin 5050/3528 RGB light LED flexible strips to a single controller.

Usage : 1 end to connect with LED RGB controller, the other ends for 4 Reel LED RGB strips.

Feature : Easy to install, connecting strip to strip, strip to controller.

Made of high-quality materials, very wear-resistant, light weight, can not be easily damaged

Mini metal gears, can be shockproof, low noise, stable performance

Operating voltage: 4.8V-6.0V; Dimensions: 24mm*23mm*11.5 mm (0.94 x0.9 x.0.45 inches); Working speed: 0.12/0.10sec/60degree

▶DC 5V-24V - Low Voltage：DC 5V-24V 30A, low voltage dimmer. ***Please check whether your power supply, this product is only suitable for DC power supply, not for AC power supply.

▶PWM Digital Dimmer：When PWM digital is dimming, it can avoid rush current, protecting your led light being damaged. 0%-100% stepless dimming, easy adjustment of brightness through turn the knob control to meet different preferences and needs.

▶Single Color/Channel Dimmer：Compatible with DC 5V-24V MAX 30A LED light application, single channel dimming controller. Suitable for single color LED strips, COB LED light strips , LED modules, boat, camper van, kitchen (under Cabinet), truck, marine, RV, deck lights, garden lights.

What You Get:10Pcs 4pin rgb led connectors,strip to wire quick connection

Specification:Those rgb connectors are suitable for connecting waterproof and non-waterproof 10mm wide rgb light strips and 4pin led extension cable.Rated voltage: 0-36V; Rated current: 5A

Easy to Use:Convenient and easy to use, and the premuim transparent PC material makes your DIY LED light strips project awesome in reducing the dark area

➤Multi-Functions LED IR Controller: There are 20 colors and 5 light pattern: Static/Flash/Strobe/Fade-change/RGB Smooth-change. Easy for you to turn ON/OFF strip lights.

➤Compatible with RGB Strip: Work with SMD 5050 3528 2835 RGB led light strips with 4-Pin connectors. (Not for RGBW strips which has 5-pin connectors.)

➤Safe to Use--Low voltage: Output current: (3x2A)6A, Input voltage: DC 5-24V. Input DC 12V, Max output current is 12A. The remote controller has been low voltage, low heat, no radiation, it is safe and touchable.

➤Operating voltage: DC 6V-24V Load current: 5A

➤Detecting range：110 degrees cone angle; Blockade time: 0 seconds

➤Trigger Way: Continuous triggering,Light Sensor: 10LUX

➤Power supply voltage:12-24V, Current: 6A

➤Delay Time: 1-10 min(adjustable). Induction distance: 5 ~ 8M

➤Infrared detection controller, adopt infrared detection way to control load switch

➤Operating voltage: DC 5-24V Load current: 5A

➤Delay time: Default setting 3-15sec

➤Automatic Induction: When people enter into the range of induction, it will output a voltage equal to input voltage, after the delay time, it will output 0V; during the delay time if motion detected, the delay time will reset, and start a new delay time

➤Convenient to use. iOS and Android app control via Bluetooth 4.0 or later version. Long control distance, convenient to use. Support IOS 8.0 and Android 4.4 or later. The manual has Two-dimensional code to download the app.

➤Compatibility. Support almost all the one-wire or two-wire LED driver IC, such as WS2811,WS2812B,INK1003, UCS1903, DMX512, LPD6803, LPD8806, APA102, APA105, TM1804, TM1814, TM1914, TM1913, P9813, WS2801, SK6812, SK6812-RGBW. You can choose R/G/B channel order.

➤Color modes. Come with 200 kinds of color change modes, auto mode and static color mode, which are vivid and beautiful. Save user setting automatically when power off. Brightness is adjustable.

What You Get:10Pcs 3pin led strip connector for strip to strip quick connection

Specification:Those 3pin led connector are suitable for non-waterproof 10mm wide dual color and digital pixel strip light.Rated voltage: 0-36V; Rated current: 5A

Easy to Use:The upgraded crystal 3pin rgb connectors are convenient and easy to use, and the premuim transparent PC material makes your DIY LED light strips project reduce the dark area and awesome

Safe in setups using less than 60 V and carrying currents up to 200A

Prevent peak currents damaging battery, motor control, motors, wiring and connectors

Verify sufficient operating voltage under load

▶Working voltage: DC 5V, the light strip and power supply must both be 5V (Input voltage 5V = Output voltage 5V). Simple connection, easy control, remote control distance is 10 meters.

▶16 colors, adjustable brightness, On/Off, 5 Light Patters: Flash, Strobe, Fade, RGB Smooth-change, Static.16-Speeds Control in Flash / Strobe / Fade-change / RGB Smooth-change. IR Remote.

▶ The volts of the power supply must correspond to the volts of the strip light！！！If Very dim, only displays red color. Please check if the strip light voltages is the same as the power volts.

➤Working voltage: DC 5V, the light strip and power supply must both be 5V (Input voltage 5V = Output voltage 5V). Simple connection, easy control, remote control distance is 10 meters.

➤19 dynamic mode, 20 static colors, 5 brightness grade and 10 speed grade, RF remote.

➤The volts of the power supply must correspond to the volts of the strip light！！！If Very dim, only displays red color. Please check if the strip light voltages is the same as the power volts.

▶Mini LED Controller: 2pcs Mini 3-button MINI RGB controller. Manual button, DC head. Interface type: 4PIN pin.

▶Product Parameters: Working Voltage:12-24V DC; Max Output Current: 3*2A; Max Output Power: 144W.

▶3-Key Functions: MODE: Dynamic modes switch; SPEED/BRIGHT: Adjust the speed(dynamic modes) or brightness(static modes); COLOR: Static color replacement.

Stall Torque: 3.2 kg / cm (4.8V), 4.1 kg / cm (6.0V); Dimension: 4cm * 2cm * 3.8cm

Operating Speed: 23 sec/60° (4.8V), 19 sec / 60° (6.0V);Operating voltage: 4.8-7.2V

Genuine S3003 servos are your easiest and most efficient way to upgrade your system

What you get: 10pcs of 10mm 2-pin LED connectors to quickly connect your LED strips to extension cables. The included screwdriver is used to open the connector and use it again.

Application: These 2 pin connectors are suitable for connecting 10mm wide waterproof and non-waterproof 3528/2835 single color LED strips. Rated voltage: 0-36V; Rated current: 5A. The connector is suitable for 2 wires of 22 awg.

Features: It's convenient and easy to use, no need to solder, and the sharp copper thorn design can pierce the PVC protective layer of your extension cord to reach the copper wire inside.

Appiaction: These upgraded mini 2 pin L-shaped COB LED corner connectors are suitable for 8mm DC 0-36V COB LED strip lights. Perfect for connecting your strip lights at the corners of desks, cabinets, corners, etc.

Premium material：The upgraded mini COB LED connector is made of PC material and pure copper, which is durable, transparent and beautiful. Voltage: 0-36V; Current: 5A.

Product Feature: It can be easily opened by hand without tools and can be reused. The mini design is just right for the light bar and will not fall off. The pure copper material makes it more conductive and will not make poor contact. After the two light bars are closely connected, there is no dark area to make it look more beautiful.