Best Rhking in 2026

✅ High strength:The pin shaft in the strut channel trolley bearing is made of solid Bearing steel, which ensures the high strength of the Wheel trolley.Steel Plate of solid steel, high strength, impact resistance.Galvanized Zinc, rust protection

✅Stable welding: the bearing and pin shaft are welded to ensure the stability of the work.

✅ Operate Steadily: Trolley Roller Standard deep groove ball bearing installation, is very smooth no noise to it when used.

✅ Using Simple: Wheel Trolley For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, M10 (3/8inch) Bolt in the middle, 80mm (3.15inch) in length,Design Load in 770 pound.

✅ High strength:The pin shaft in the strut channel trolley bearing is made of solid alloy steel, which ensures the high strength of the Wheel trolley.Intermediate support of solid steel, high strength, impact resistance.Galvanized Zinc, rust protection

✅ Operate Steadily: Wheel Trolley Standard deep groove ball bearing installation, is very smooth no noise to it when used.Bearing welding positioning, to ensure the stability of the work.

✅Using Simple: Wheel Trolley For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, Can be used for electric hoist installation,2-way moving installation,Design Load in 700 pound.

✅Electric Hoist Installation: the distance from the center of the hole at the bottom of the Strut Channel Trolley can meet the location requirements of the installation hole of different types of electric hoist.

✅2 way moving installation: it can be used in conjunction with the Strut Channel to set up 2 directions of movement so that the Hoist can work in multiple positions.

✅Parameter: Wheel Trolley For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, Bolt mounting hole 5.5mm, recommended to use M5 bolts

✅Using Simple:There are3 mounting holes on the underside of the Wheel Trolley, which are conveniently positioned to install screws without interference.

✅Operate Steadily: Wheel Trolley Standard deep groove ball bearing installation, is very smooth no noise to it when used.Bearing welding positioning, to ensure the stability of the work.

✅ Using Simple: Trolley Roller Limit for use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, It is used to Limit the trolley roller any position movement and Prevent the trolley assembly from detaching at the end of the Strut Channel

✅operation simple:Using square neck bolt structure, only need to tighten the hexagon nut, can be locked with the Strut Channel, easy to install, convenient.

✅High stability: Polyurethane positioning bolts are used in the positioning part to buffer and protect the trolley assembly.The transverse design of the buffer bolts can resist greater impact force. reduce vibration.

✅ APPLICATION:The adapter allows you to use your Power drill with Auger Drill. Suitable the 3/4 inch internal diameter of the auger shaft and 7/8inch internal diameter of the auger shaft.

✅ MANUFACTURE:Auger adapter are made of alloy steel with high strength, Quenching treatment, being hard chrome plated and good wearing resistance. good impact resistance and good deformation resistance.

✅ SIZE:Auger adapter Overall Length: 5inch,Body Diameter: 0.71inch and 0.86inch.Bolt hole is 0.25inch hole and 0.31 inch hole. Fits drill chucks 1/2 inch and larger.

✅Using Simple: Strut Channel Connector For use with 1-5/8" Wide and 1-5/8" height Strut Channel. Screw fixation allows the two strut channels to be joined together.Extend orbit.

✅High Strength:The connector adopts galvanized steel plate with 3mm thickness to ensure high strength. Galvanized Zinc, rust protection

✅Flexible clamping: multiple threaded holes are designed on the back of the connector to facilitate clamping the Strut channel of the slotted .

✅BEST MATERIAL FOR MAKING KNIVES:1095 Steel Flat Stock is very suitable for DIY knife manufacturing, with good toughness and machinability, the hardness of heat treatment can reach HRC58-60, many famous tool manufacturers choose 1095 steel plate.

✅COLD ROLLING ANNEALING:We have annealed 1095 steel plate in advance, which is easy to grind, easy to get the shape you want, save your time and labor intensity, and improve the workability of material.

✅SIZE INFORMATION: Each package contains 3pack 1095 Steel Bar Stock, all of which has a size of 12" x 1.8" x 0.2". Each piece of steel plate for you to reserve enough processing allowance, enough quantity can also meet your daily use and replacement.

✅HIGH QUALITY STEEL PLATE: steel plate made of low carbon steel, easy to process, can be welded, good comprehensive performance.

✅COLD ROLLING: Steel plate is rolled at room temperature, no oxide sheet is produced, the surface quality is good, and the dimensional accuracy is high.

✅SIZE INFORMATION: Each package contains 2pack Steel Bar Stock, all of which has a size of 125mm x 125mm x 3mm.

✅Application:Jack Screw are used for leveling work on Milling machine, Drilling machine, setting up machinery. It can also be used as a pad for the pressing board.

✅Parameter: screw jack the minimum height of 2.63 inch, highest can adjust the height 3.93 inch, 5 tons loading capacity, Thread diameter M18.

✅Prevent rusting:surface blackening treatment,body plating treatment, rust, wear resistance.

✅ If you need to process parts on the lathe, you need a Lathe Dog to clamp the workpiece, and do not need to align. The centering accuracy is high, and it can bring you torque.

✅ The product is equipped with adjusting screw,45 steel material manufacturing

✅ Rust proof, wear resistant, with strong rigidity

✅ BEST STAINLESS STEEL FOR MAKING KNIVES:440C Steel Flat Stock is more suitable for knife manufacturing than any other stainless steel. Usually, the finished tool will rust or have no luster when the knife maker puts it in the knife sheath. 440C material has strong stain-resistance, no rust and no discoloration,It just needs a gentle wipe and it's as bright as new.

✅WILL NOT RUST:440C knife making steel is a kind of martensitic stainless steel with high corrosion resistance and high hardness. The carbon content is 1.0% and the chromium content is 16-18%. 440C knife blade steel is more wear resistant and hard than 1095 steel plate, does not rust, used to manufacture high quality knife.

✅SIZE INFORMATION: Each package contains 3pack 440C Steel Bar Stock, all of which has a size of 12" x 1.5" x 0.12". Each piece of steel plate for you to reserve enough processing allowance, enough quantity can also meet your daily use and replacement.

✅milling machine chip fan with the tool handle, rotating the spindle can remove iron filings efficiently.

✅Compared with the traditional air gun cleaning method, the sweeper can reduce the fatigue of the staff, avoid the pollution of the working area, and improve the work efficiency.

✅Made of aluminum, the chip fan has double spring protection.

✅Size :Roller Chain Sprocket 9.525mm (3/8") Pitch,30Teeth,5/8" Bore Diameter, 0.187" Keyway with 2 Setscrews at 90 degrees,B Type.

✅Material:Sprocket is made of AISI 1045 Medium Carbon Steel, gear part of high temperature quenching heat treatment, high hardness, Harden Teeth at HRC38-42,wear resistance.

✅Feature:Sprocket tooth surface hardening treatment, sprocket overall blackening treatment, rust, corrosion resistance.

✅Size :Roller Chain Sprocket 9.525mm (3/8") Pitch,36Teeth,5/8" Bore Diameter, 0.187" Keyway with 2 Setscrews at 90 degrees,B Type.

✅Material:Sprocket is made of AISI 1045 Medium Carbon Steel, gear part of high temperature quenching heat treatment, high hardness, Harden Teeth at HRC38-42,wear resistance.

✅Feature:Sprocket tooth surface hardening treatment, sprocket overall blackening treatment, rust, corrosion resistance.

The trolley cart with wheels has the front casters with ability to swivel 360 degree

Heavy duty air filled back wheels for easy maneuverability

Side latches allow connectivity for easy and secure stacking

SAFETY: Built-in bumper guards on the side plates increase safety, and extend trolley life.

VERSATILITY: Easily adjusts to wide-flange H-beams, standard I-beams, or curved track.

DURABILITY: Welded all-steel frame and powder coat finish provide maximum protection.

Genuine UNISTRUT Brand

4 Wheel Trolley Assembly

For use with: P1000, P1001, P5000, P5001, P5500, P5501 and All 1-5/8" or Taller Strut Channel

Genuine UNISTRUT Brand

4 Wheel Light Duty Trolley Assembly w/Premium Bearings for Smooth Quiet Operation

For use with: P1000, P1001, P5000, P5001, P5500, P5501 and All 1-5/8" or Taller Strut Channel

Genuine UNISTRUT Brand

Channel Trolley Track Intermediate Support Hanger

Requires 3/8" x 2-1/2" Bolt and 3/8" Nut - NOT Included

✅ High strength:The pin shaft in the strut channel trolley bearing is made of solid Bearing steel, which ensures the high strength of the Wheel trolley.Steel Plate of solid steel, high strength, impact resistance.Galvanized Zinc, rust protection

✅Stable welding: the bearing and pin shaft are welded to ensure the stability of the work.

✅ Operate Steadily: Trolley Roller Standard deep groove ball bearing installation, is very smooth no noise to it when used.

✅ Using Simple: Wheel Trolley For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, M10 (3/8inch) Bolt in the middle, 80mm (3.15inch) in length,Design Load in 770 pound.

✅ High strength:The pin shaft in the strut channel trolley bearing is made of solid alloy steel, which ensures the high strength of the Wheel trolley.Intermediate support of solid steel, high strength, impact resistance.Galvanized Zinc, rust protection

✅ Operate Steadily: Wheel Trolley Standard deep groove ball bearing installation, is very smooth no noise to it when used.Bearing welding positioning, to ensure the stability of the work.

esign Load in 300 lbs. at 600 RPM, 450lbs. at 300 RPM, 600lbs. at 100 RPM load.

For use with All 1-5/8" or Taller Strut Channel.

9/16" Diameter Hole; Thickness: 1/4" (6mm).

Plain trolley weight capacity: 1 Ton (2000 lbs)

Push beam trolley comes with multiple spacer washers make beam flange width adjustment quick and easy

Manual trolley is rugged steel side plates feature built-in bumper guards

Genuine UNISTRUT Brand

2 Wheel Trolley Assembly

For use with: P1000, P1001, P5000, P5001, P5500, P5501 and All 1-5/8" or Taller Strut Channel

✅Using Simple: Wheel Trolley For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, Can be used for electric hoist installation,2-way moving installation,Design Load in 700 pound.

✅Electric Hoist Installation: the distance from the center of the hole at the bottom of the Strut Channel Trolley can meet the location requirements of the installation hole of different types of electric hoist.

✅2 way moving installation: it can be used in conjunction with the Strut Channel to set up 2 directions of movement so that the Hoist can work in multiple positions.

Suits 3 inch, 4 inch, and 6 inch tall I-Beams (measure top of flange to bottom of flange). 1,000-pound load capacity.

Industrial grade I-Beam Trolley as used in automotive assembly plants. Rugged Cast Iron body construction.

Comes with load carrying hook plate attachment, and side guide rollers to help the trolley glide smoothly, traverse corners and prevent unnecessary wear on track.

Genuine UNISTRUT Brand

2 Wheel Light Duty Trolley Assembly

For use with: P1000, P1001, P5000, P5001, P5500, P5501 and All 1-5/8" Channel

✅Parameter: Wheel Trolley For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, Bolt mounting hole 5.5mm, recommended to use M5 bolts

✅Using Simple:There are3 mounting holes on the underside of the Wheel Trolley, which are conveniently positioned to install screws without interference.

✅Operate Steadily: Wheel Trolley Standard deep groove ball bearing installation, is very smooth no noise to it when used.Bearing welding positioning, to ensure the stability of the work.

✅ Using Simple: Trolley Roller Limit for use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, It is used to Limit the trolley roller any position movement and Prevent the trolley assembly from detaching at the end of the Strut Channel

✅operation simple:Using square neck bolt structure, only need to tighten the hexagon nut, can be locked with the Strut Channel, easy to install, convenient.

✅High stability: Polyurethane positioning bolts are used in the positioning part to buffer and protect the trolley assembly.The transverse design of the buffer bolts can resist greater impact force. reduce vibration.