Best Road King Truck Parts in 2026

Heavy duty dual spring tender kit, 20" springs with black PVC covers

Ideal for ABS and 3 in ONE cable use

Includes snap on D-clamp and 1/2" 3-hole cable clamp holder

Hubcap standard 6 - hole with side plug

Hubs are die-casted from 380 alumiuum alloy

Resists cracking, warping and breaking

Steer Hubcap standard 6 - hole with side plug

Measurements: Bolt circle: 5 1/2" , Bolt Size: 5/16", Number of Bolts: 6, Height: 1 13/16", Inside Depth: 1 1/16", Flange ID: 4 9/16", Flange OD: 6 3/16"

Hubs are die-casted from 380 aluminum alloy Resists cracking, warping and breaking

Lids soft open gently, Ideal for supporting the lid to keep it open

Force: 18 Lbs(Per Strut), Length (Center-to-Center): 6.89 inch(175 mm), Compressed Length (Center-to-Center): 4.73 inch(120 mm)

Support opens lids to a maximum angle of 90 degrees. Available working temperature: -10℃~50℃/14℉-122℉

Direct OEM Replacement

Replaces Phillips 17-145, Tectran 9421-1

Lenght: 25"

✔️EXTRA LARGE LONG--6.5' Long 1 1/4" outer diameter compression spring, a safer zipline spring brake.Suitable for zip lines 1.over 60ft, compatible with 3/16, 1/4, 5/16, 3/8 inches diameter zipline cable/wire.This compression spring brake will give you that extra cushion you need and 100% guarantee your safety.

✔️PREMIUM QUALITY:Unlike other normal spring on the market, our spring is made of heat treated stainless spring steel,it has longer service life and better elasticity.Not easy to rust.

✔️PATENTED DESIGN:Compare with other stoppers on the market, Our patented design:Rubberized stoppers have built-in high-quality iron tube, which can prevent the cable from rubbing on the stoppers for a long time to cause the stoppers to break.The rubberized stoppers at each end protect the cable, the trolley, and the rider with a smooth finish.

Heavy duty dual spring tender kit, 20" springs with black PVC covers

Ideal for ABS and 3 in ONE cable use

Includes snap on D-clamp and 1/2" 3-hole cable clamp holder

Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety

Includes necessary hardware for easy installation

Some ACDelco Gold parts may have formerly appeared as ACDelco Professional

Power Stop engineered carbon-fiber ceramic compound significantly enhances braking performance versus traditional ceramic brake pads

Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE

Rotors are zinc plated for maximum protection against rust.

Ceramic keeps your wheels dust-free & Genuine Geomet Coated rotors maintain that new car look

Brake rotors are fully coated, including inside the vanes to extend rotor life, to maintain that great look behind open wheels

Power Stop’s Genuine Geomet coated brake rotor, Ceramic brake pads & stainless-steel installation hardware are engineered to eliminate dust, prevent rust and improve stopping power

Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks

Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions

Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions

【FUNCTION】- These tracker tender kits are suitable for all semi trucks, trailers and tractors. Used to hold ABS & air power lines hoses, and pull them up. The spring acts as a buffer and protection, prevent lines from being dragged to the ground. Replaces Phillips 17-145, Tectran 9421-1 and so on.

【HEAVY DUTY HOOK】- 9.5mm(0.4") diameter carbon steel D-shape hook, thicker than other hooks, provides greater load bearing. The inner buckle design effectively prevents the hook from breaking loose.

【CLAMP HOLDER NO LOOSE & DROP】- There is a special widened design on the hose holder, which can effectively prevents washers skid. Use lock nuts, can remain fixed for a long time. Sides staggered design, allows better clamping of the wire and hoses.

Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety

Includes necessary hardware for easy installation

Some ACDelco Gold parts may have formerly appeared as ACDelco Professional

This kit includes 2 Auto specialty OE Replacement Drums, matching brake shoes, Hold-Down/Spring Kit, and adjusters where available

Brake kits match the right pad and rotor combination for faster stops

Includes Power Stop Evolution Ceramic Brake Pads to provide more pad bite without noise or dust

Brake duct hose measures 3 inch diameter x 10 feet long

Hose is flexible, features a non-kink design, and directs air from the front ducts to the spindle ducts

Rated at 300 degrees fahrenheit

Power Stop Carbon-fiber ceramic compound significantly enhances braking performance versus traditional ceramic brake pads

Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE.

Dual layer high temp rubberized shims insulate noise for virtually silent braking.

This kit includes 2 Auto specialty OE Replacement Drums, matching brake shoes, Hold-Down/Spring Kit, and adjusters where available

Brake kits match the right pad and rotor combination for faster stops

Includes Power Stop Evolution Ceramic Brake Pads to provide more pad bite without noise or dust

Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety

Includes necessary hardware for easy installation

Some ACDelco Gold parts may have formerly appeared as ACDelco Professional

【EXTENSIVE APPLICATION】- The Tracker Tender Kit is used to hold the air lines and power cord, which can tighten these lines and spring plays a role in buffering and protection. And these spring tender kits are suitable for all trucks, semi trucks, trailers and Tractors. Replaces Tectran 9421-2, Automann 177.3007, Tramec Sloan 451748, Phillips 17-1482, Velvac 580071.

【ANTI-SLIP 3-HOLE CLAMP HOLDER 】- 3-Hole Clamp Holder has a special widening design to effectively prevent the washers from sliding, and use it with the locking nut, which can fix the Air Hose and Power Cord very well.

【GALVANIZED CARBON STEEL SPRING】- 20 "Long Spring is made of high quality carbon steel with good elasticity and toughness, which can run normally and have a long service life at high intensity. And the surface of the spring is galvanized, which can prevent rust and corrosion resistance.

【EXTENSIVE APPLICATION】- The tender spring kit is used to hold the air lines and power cord, which can tighten these lines and spring plays a role in buffering and protection. And these spring tender kits are suitable for all trucks, semi trucks, trailers and Tractors. Replaces Phillips 17-145, Tectran 9421-1.

【GALVANIZED CARBON STEEL SPRING】- 25 " Long spring is made of high quality carbon steel with good elasticity and toughness, which can run normally and have a long service life at high intensity. And the surface of the spring is galvanized, which can prevent rust and corrosion resistance.

【ANTI-SLIP 3-HOLE CLAMP HOLDER 】- 3-Hole clamp holder has a special widening design to effectively prevent the washers from sliding, and use it with the locking nut, which can fix the Air Hose and Power Cord very well.

Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety

Includes necessary hardware for easy installation

Some ACDelco Gold parts may have formerly appeared as ACDelco Professional

【STURDY AND DURABLE】Heavy duty large tension spring tender is made of high quality carbon steel,good elasticity and toughness.Zinc surface-plating,effectively prevent rust, rain corrosion.

【ANTI-SLIP】The special widened design effectively prevents washers skid.Use lock nuts,when the lock nut is tightened,the effect produced is exactly the same as that produced by a hammer driving in a wedge.

【EASY TO INSTALL】Includes snap on D-clamp and 1/2" 3-hole cable clamp holder.Ideal for ABS and 3-in-1 air power line hose cable use.

25" LONG SPRING - GREAT MEMORY: The spring is made of high-quality carbon steel with galvanized surface, which has good resilience and can operate normally under high strength. In addition, it also effectively prevents rust oxidation, rain corrosion, exposure to sunlight and low temperature.

1/2" 3-HOLE CLAMP HOLDER: The clamp holder, made of crush-resistant, durable black nylon, is easy to install and holds multiple wires securely together. Use a locknut to produce the same effect as hammering a wedge into.

BIG & HEACY-DUTY CLIP: The carbon steel snap on D-clamp (0.4" diameter) provides greater load-bearing capacity. The D-clamp is large and easy to operate, and the internal buckle design effectively prevents the clamp from loosening.

PVP

Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety

Includes necessary hardware for easy installation

Thoroughly manufactured to meet your expectations for fit, form, and function

Brake duct hose measures 3 inch diameter x 10 feet long

Hose is flexible, features a non-kink design, and directs air from the front ducts to the spindle ducts

Rated at 550 degrees fahrenheit

[Vehicle Fitment]: Compatible with Mercedes-Benz C230 2008-2009, C250 2010-2012, C300 2008-2014, C350 2008-2014---Fits AWD model Only

[Reference Number]: 1333760

[Installation Position]: Front Left and Right (Driver and Passenger Side)

Raybestos is world-renowned in the automotive aftermarket as a leading manufacturer of brake parts

Products includes friction, rotors, drums, calipers, hub assemblies and hydraulics, matches or exceeds OE form, fit and function

Each product is extensively tested to ensure you are receiving a high-quality and reliable product

Product Type :Auto Part

Package Dimensions :7.12" L X3.25" W X1.5" H

Country Of Origin :United States

USB Handbrake Technology-- USB connection.Plug and play, easy to install, Only Exclusive business seller sold on amazon platform compatible with Sony Play Station 4 + PC(if you want to purchase PS5,you can purchase the ASIN:B09MNBN5Z1). The referenced Hall-effect precision technology increases the brake feel of racing and makes you feel 100% racing experience!

USB Handbrake Material -- Made of light weight CNC machined aluminum and mild steel materials more durable more concise.No wobble,no noise.No need to install the driver, connect USB can be used directly

Progressive Handbrake -- Non-touch switch, 64bit non-contact plus Hall sensor, more precision, longer life, high rigidity compression spring provides hand brake damping feel.Independent & extra game device to control the racing game.