Best Rockville in 2026

Adjustable height 42" - 79". Heavy Duty Steel and Aluminum Composite Construction. Lightweight construction allows for easy maneuverability and travel.

Color: Black. Weight Capacity: 154 lbs. Base spread: 0 - 23inches. Tube Diameter: 1.38 inches. Leg Diameter: 1.38 inches.

Rockville RVSS4AB Tripod Speaker Stand With Air Lift and Lowering System. Travel Bag Included! Hydraulic System Makes Raising and Lowering The Speaker Quick, Painless, and Safe.

Adjustable height 42" - 79". Heavy Duty Steel and Aluminum Composite Construction. Lightweight construction allows for easy maneuverability and travel.

Color: Black. Weight Capacity: 154 lbs. Base spread: 0 - 23inches. Tube Diameter: 1.38 inches. Leg Diameter: 1.38 inches.

User needs a speaker on the stand to lower it because it lowers with weight

Weight Capacity: 100 lbs. Adjustable Height Range: 71 inches.

Base spread: 0-32 inches. Tube Diameter: 1.38 inches. Leg Diameter: 1.38 inches.

User needs a speaker on the stand to lower it because it lowers with weight

Includes (2) 20 foot 1/4" to Speakon NL-4 speaker cables

Includes (1) Carry Bag

User needs a speaker on the stand to lower it because it lowers with weight

This heavy-duty universal stand can be used as a Speaker Stand or a Lighting Stand! It's sturdy steel construction and custom carrying case add to the quality and support this stand gives.

The sturdy and expandable long tripod legs ensure that your speakers will be stable in any environment.

User needs a speaker on the stand to lower it because it lowers with weight

Base spread: 0-23 inches

Tube Diameter: 1.38 inches. Leg diameter: 1.38 inches

Steel Construction with Nylon Clutch and Base

Black Color

User needs a speaker on the stand to lower it because it lowers with weight

Adjustable feet make the Rockbooth stable on any floor, Our panels and table are larger than the competition and our XL model is even larger than this one!, Foldable design is quick and easy to set up and break down, Scrim is fire retardant

Scrim is easy to wash – simply wash with cold water and lay it flat to dry, Non-slip rubber feet for stability, 90-day money back guarantee including return shipping, Product weight: 37 Lbs. Dimensions of facade panels: 20" L x 44.1" H. Dimensions of table panel: 39.5" L x 20" D

Detachable hinges. Includes Black scrim made of a special stretch material. Scrim is fire retardant. Scrim is easy to wash – simply wash with cold water and lay it flat to dry. Non-slip rubber feet for stability

Expandable: add additional panels sold separately (models ripsaw and araba). additional scrims available in our store in Black and white (models scab and rscfaw ). Product weight: 7 lbs. Packaged Shipping weight: 10 lbs.

Premium Audiophile RCA Interconnect Cables.

Split Pin Technology Ensures a Secure Connection.

Outstanding Noise Rejection, Accuracy, and Frequency Response.

Color Coded Channel Identification. Length: 12-Foot.

Also Available in: 3-Foot, 6-Foot, 17-Foot, 20-Foot and 25-Foot.

Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Red Stitching Cone Reinforcement Ensures Long Life. Polypropylene (PP) Dustcap.

Two Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire. Impedance: Dual 2-Ohm Voice Coils.

Vented Hole on T-yoke Enhances Heat Dissipation. Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet.

Custom Rockville Mounting Gasket Looks Beautiful and Makes it Easy To Mount the Subwoofer Air-Tight. High BL Magnetic Motor Gap.

We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated. Cutout Diameter: 11.125" inches.

Mounting Depth: 5.75" inches. Frequency Response: 27 Hz - 1.5K kHz. 8mm T-Yoke + 8mm Washer. Sensitivity: 85dB. Sealed Enclosure Volume: 0.6 – 1.1 Cubic Feet.

Vented/Ported Enclosure Volume: 1.1 – 1.6 Cubic Feet. Weight: 17.64 Lbs. Shipping Weight: 22.05 Lbs. Shipping Box Dimensions: 15.75" x 15.75" x 13.6" Inches.

Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17' 10 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3' 10 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 40 Amp ATU Inline Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets . Soft abrasion proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

Master volume control. Illuminated 5 band graphic equalizer. 5 segment LED power out display. 8 balanced XLR inputs. 8 1/4 TRS inputs. 1 RCA L/R AUX input. 1 RCA L/R Rec output

1 1/4 Effect loop input/output. Dual 1/4 speaker outputs (accepts 4 ohm or 8 ohm speakers). +15V phantom power. Fan Vent Cooling System. Dimensions: 19 x 12 x 7.5. Weight: 25.4Lbs.

Peak Power Output:.....2400w x 2 @ 4 Ohm.....1800w x 2 @ 8 Ohm.....4800w x 1 @ 8 Ohm.

12 Channel mixer section: 6 mono channels, 3 stereo channels. 1 dedicated USB/SD input. Built-in Bluetooth playback.

Studio-grade stereo FX processor with 16 presets including reverb, chorus, plate, delay, chorus, cathedral and various multi-effects. 8 high-quality mic preamps with switchable +48 V phantom power for condenser microphones.

3-Band EQ (high, mid, low) per channel. Pad Switch on each Mono Channel. Clip LEDs on each Mono Channel. Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs.

Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode. Monitor Level Knob with 5 LED Level Meter. Main Level Knob with 2 x 5 LED Level Meter.

Dual 1/4" Stereo and Dual RCA Aux Input with Independent Level Knob for External Signal Sources. Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption.

1/4" Foot-switch Input connector. Dual RCA REC Out. Dual Speak-ON jacks for Monitor Output. Dual Fan vent Cooling System. 110-120V power supply. Dimensions: 18" x 11.22" x 11.41". Weight: 30.9Lbs. NOTE: Refer the User Manual before use.

AUX volume control. Master volume control. 4 balanced XLR inputs. 4 1/4” TRS inputs. 1 RCA AUX input. 1 ¼” master line input. ¼” line output for adding a subwoofer or more amplifiers or powered speakers.

1 RCA Rec output. 1 1/4” Effect loop input/output. Amplified speaker outputs: ¼” TS (8-ohm). +48V phantom power. Fan Vent Cooling System. Dimensions: 18.9” x 8.9” x 6.3”. Weight: 18 lbs.

Each channel has gain, aux control, FX control, Pan control, Volume control. Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping . Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch). Aux send and Aux returns on every channel to connect all types of external effects and processors. You can control your monitor mix and check levels through your headphones . Limit L and Limit R LED indicators.

These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping. We recommend lowering the gain if you see these LED’s lit up. Power and Output level LED indicators. Main output fader allows you to fade the sound between the left and right channel. RCA input, RCA output, and USB player. Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R.

Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient. Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone.

Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Red Stitching Cone Reinforcement Ensures Long Life. Polypropylene (PP) Dustcap.

Two Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire. Impedance: Dual 2-Ohm Voice Coils. Vented Hole on T-yoke Enhances Heat Dissipation.

Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet. Custom Rockville Mounting Gasket Looks Beautiful and Makes it Easy To Mount the Subwoofer Air-Tight.

High BL Magnetic Motor Gap. We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated. Cutout Diameter: 9.41" inches.

Mounting Depth: 5.29" inches. Frequency Response: 36.7 Hz - 1.5K kHz. 8mm T-Yoke + 8mm Washer. Sensitivity: 85dB. Sealed Enclosure Volume: 0.6 – 1.1 Cubic Feet.

Vented/Ported Enclosure Volume: 1.1 – 1.6 Cubic Feet. Weight: 16.53 Lbs. Shipping Weight: 19.84 Lbs. Shipping Box Dimensions: 13.58" x 13.58" x 12.6" Inches.

Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 800 Watts x 4 Channel. - 4 Ohm:540 Watts x 4 Channel. - 4 Ohm Bridged: 1600 Watts x 2 Channel. High-Speed MOSFET Power Supply. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Tertiary Supplies Circuitry. Optical Coupler Class “AB” Technology. Studio-Grade Bipolar Output Stage Transistors.

Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 3KHz. High Pass Filter: 15Hz - 1KHz. Full IC-Controlled Protection Circuitry. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: < 0.05%. S / N Ratio: >90dB. Frequency Response: 10Hz - 50KHz. Damping Factor: >150 @ 100Hz. 35 Amp*3 ATC Fuse. Dimensions: (W x H x L) 9" x 2.4" x 21.0"

Master volume control. 4 balanced XLR inputs. 4 1/4” TRS inputs. 1 RCA L/R AUX input. 1 RCA L/R Rec output. 1 1/4” Effect loop input/output. 8-ohm dual 1/4” speaker outputs. +15V phantom power

Fan Vent Cooling System. Dimensions: 5.75” x 19.44” x 9.5”. Weight: 18Lbs

FX footswitch input lets you turn your effects on or off. 4-Band EQ per channel. Each channel is equipped with pad, must, and solo buttons with LED’s. Each channel has gain, aux control, FX control, Pan control, Volume control.

Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping. Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs. Limit L and Limit R LED indicators.

These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping. We recommend lowering the gain if you see these LED’s lit up. Power and Output level LED indicators.

Main output fader allows you to fade the sound between the left and right channel. RCA input, RCA output, and USB player. Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R.

Gain control adjusts he sensitivity from -60dB to -20dB when the pad button is in the out position. When the pad button is pressed in the gain will adjust from 240dB to 0dB.This works even with the fader turned down.

You can use this to preview channels before they are let into the mix or just to check out a channel during a live performance. You can solo as many channels at a time as you want. Built in cooling fan and ventilation system.

USB input supports unlimited capacity (as many GB as you want). 110/220V switchable power supply. Dimensions: (L*W*H) 15.16" x 17.72" x 7.09" inches / 38.5 x 45 x 18 cm. Weight: 23.06Lbs. (10.46kg)

High-Speed MOSFET Power Supply. Rugged switching MOSFETs for Class D in CH5. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Optical Coupler Class “AB” +“D” Technology. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: (CH1-CH4)40Hz –4KHz /(CH5)50Hz –250Hz. High Pass Filter: 15Hz – 4KHz. Subsonic Filter: 15Hz - 55Hz.

Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: < 0.05%. S / N Ratio: >90dB. Frequency Response: 15-35KHz. Damping Factor: >100@ 100Hz. 40 Amp x3. Dimensions: (W x H x L) 9'' x 2.4' x 18.6".

Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD: < 0.4%. Subwoofer Level Remote Control. Fuse Rating: Single 15A.

Specifications: Peak Power 400 Watts. RMS Power: 100 Watts. Impedance: 4 Ohm. Dimensions (L x W X H): 11.4" x 8.3" x 2.8" Inches. Frequency Response: 20Hz - 150Hz. Signal to Noise Ratio: >90dB. Sensitivity: 90dB @ 1w / 1m. Input sensitivity, Low level: 300mV. Input sensitivity, High level: 1.0V

Wireless remote control. High-power 2-way pro sound reinforcement speaker system for live sound and playback applications. Compact and light weight system delivers distortion free sound even at extreme SPL.

Linear Class AB amplifier technology: high power, transparent sonic performance. Internal switch-mode power supply for low distortion audio with superior transient response.

Built-in bass and treble equalization processor for ultimate system control and speaker protection. State-of-the-art 1.35" Japanese made pure titanium-diaphragm compression driver for crystal clear high-frequency reproduction.

Ultra-wide dispersion, 40° large-format horizontal wave guide horn molded directly into cabinet. Ultra-low noise Mic / Line input via combo XLR & 1/4-inch TRS stereo jacks with volume control.

Line RCA and XLR input with separate Volume adjustment. Additional balanced RCA line output for linking of additional speaker systems. Versatile trapezoidal enclosure design allows different positioning.

Stand mounting with 35-mm pole socket. Ergonomically shaped side. High-quality components and exceptionally rugged high impact ABS construction.

Amplifier clip limit LED indicator & power LED cabinet rear. Front display power meter Blue LED. 115 Volt power supply with external user serviceable fusing. Dimensions : 11.54" X 8.98" X 16.23".

Ultra-low noise Mic / Line input via XLR & 1/4-inch stereo jacks with volume control. Line RCA and XLR input with separate Gain adjustment. Additional balanced line output via 1/4” for linking of additional speaker systems. Versatile trapezoidal enclosure design allows different positioning. Flyable and stand mounting with 35-mm pole socket

High-quality components and exceptionally rugged high impact ABS construction. Amplifier clip limit LED indicator & power LED cabinet rear. Front display power meter Blue LED. Dimensions : 11.57" X 8.98" X 16.23"

Strong velcro on the frame is attached with glue and rivets. Folds completely flat for easy transport with the included carrying bags and pouches. Adjustable feet stabilize the booth on any floor. Our panels and table are larger than the competition!.

Foldable design is quick and easy to set up and break down. Scrim is fire retardant. Scrim is easy to wash – simply wash with cold water and lay it flat to dry. Non-slip rubber feet for stability. 90-day money back guarantee including return shipping. Product weight: 45 lbs.. Color: White

Compatible with Chauvet, American DJ, and other top Brands

5 internal and 2 external compartments (4 for lights, 1 for controller, and 2 for cables and other accessories)

Accommodates various-sized gear with removable dividers

Designed to fit different types of fixtures including the slim Par REMPTY trade; IRC Series, slim Par Pro Series, pixpar, slim Par Quad, and much more! Padded, internal compartments

Save time during set up and tear down with easy access to each compartment. Padded handles for easy transport. External compartments use top quality zippers that stand the test of time

Specifications: compartments: 7 (5 internal, 2 external). compartments are removable if you want to accommodate 2 larger lights. Weight: 2 lb (0.9 kg)

Size (internal): 18.1 x 10 x 11 in (460 x 254x 280 mm). size (external): 18.5 x 11.8 x 9.4 in (470 x 300 x 240 mm). size (per compartment): 3.5 x 10 x 11 in (90 x 254 x 280 mm)

EVA Pad on top to eliminate unwanted vibrations.

Triple enforced steel base with ultimate sturdiness.

Black Color. Weight capacity: 80 lbs.

Adjustable height Range: 33-45 inches.

Base: 17.7 x 17.7 x 17.7 inches.

Top Plate: 9.05 x 9.45 inches.

Tube Diameter: 1.5 inch - 1.37 inch.

Brass & rubber spikes add stability to any floor surface. Isolation pads create a no-slip surface as well as improve acoustical performance. Empty Body design allows you to add sand in order to increase the weight of the stands if needed

60 lbs. Load capacity allows you to use a heavier speaker without compromising stability