Best Rstfa in 2026

M278 4.7L 5.5L Fits for 2013-2014 GL450/2013-2016 GL550/2013-2016 GL63 AMG/2016-2018 GLE63 AMG/2016-2018 GLE63 AMG/2017-2018 GLS550/2017-2018 GLS63 AMG/2012-2014 ML550/2012-2015 ML63 AMG.

Placement on Vehicle Include: (left side + right side)/(driver side + passenger side).

Aftermarket product with premium quality,strict quality control standards.Perfect match the original factory specifications.

When the engine is working, it will produce a certain amount of vibration. Well rubber components from mount, which can eliminate the resonance generated when the engine is working.

Damage to the engine mount will cause the entire engine to vibrate.Once found, replace it immediately. It is even replaced every 80,000 mi.

When one of them is damaged, the balance will be destroyed. If it is not replaced in time, the damage of the other will be accelerated. Must be replaced as a set 2 pieces.

VEHICLE APPLICATIONS: HONDA ACCORD; 2006-2015 HONDA CIVIC; 2012-2015 HONDA CROSSTOUR; 2007-2016 HONDA CR-V; 2005-2017 HONDA ODYSSEY; 2019-2022 HONDA PASSPORT; 2009-2022 HONDA PILOT; 2006-2014,2017-2022 HONDA RIDGELINE

VEHICLE APPICATIONS CONT: 2007-2011 ACURA CSX; 2013-2022 ACURA ILX; 2007-2020 ACURA MDX; 2007-2018 ACURA RDX; 2005-2012 ACURA RL; 2014-2020 ACURA RLX; 2004-2014 ACURA TL; 2015-2020 ACURA TLX; 2004-2014 ACURA TSX; 2010-2013 ACURA ZDX; 2003-2022

FILTER CROSS REFERENCES: BOSCH P3875WS; Honda (80219-SHJ-A01, 80292-SDA-407, 80292-SDA-A01); K&N VF2001; Purolator C35519

REPLACEMENT Engine Air Intake Hose -Replace your broken air intake hose on your GLK 350 and restore drive-ability and fuel economy.

REPLACES PART # 2720902982 2720902882

FITMENT - 2010 2011 2012 GLK350 3.5L V6

VEHICLE APPLICATIONS: Dodge Ram (2007-2010 2500 & 3500 L6 6.7L, 2008-2010 4500 & 5500 L6 6.7L, 2011-2022 2500 L6 6.7L, 2019-2022 2500 V8 6.4L, 2011-2022 3500 L6 6.7L, 2019-2022 3500 V8 6.4L, 2011-2022 4500 L6 6.7L, 2019-2022 4500 V8 6.4L, 2011-2022 5500 L6 6.7L, 2019-2022 5500 V8 6.4L)

DOUBLE MAXIMUM PROTECTION: FRAM automotive replacement engine filter provides 2x the protection compared to standard filters for up to 12,000 miles.

EASY INSTALLATION: A seamless DIY replacement that can be completed in minutes. Remove your old filter, replace with FRAM engine filter ensuring it is sealed around the perimeter, replace cover and fasten.

Efficiently filters outside air

Withstands damage from oil and moisture

Easy to install

Helps extend performance, Protect against dirt

Improve fuel mileage, Recommended replacement every 12,000 miles

Replacement for FRAM CA10169, TOYOTA Genuine part #17801-31120, 17801-AD010

4 INCH x 8 FT DURABLE FLEX DUCT - We made this flexible aluminum 4" ducting with an extra layer of PVC outside for added durability. Gone is frustration from the accidental rips and tears in thin exposed aluminum ducting products. This 4" vent hose will work for your dryer, duct fan, grow tent, or whenever you need to move air from one point to another.

4 LAYER PROTECTION- Our 4 inch duct hose Keeps your ventilation system free of rips, pin holes and resistant to leaks. Under the White PVC layer our ducting is built with 2 layers of Aluminum Foil With a layer of PET and Steel Wire Helix to preserve the shape

FLEXIBLE & EASY TO USE- TerraBloom 4 inch air ducting is super flexible and easy to install. It will slide right on your Duct Fan, Vent Exhaust, Carbon Filter or Light Reflector. We include a pair of 4 Inch Clamps to make the installation a breeze

VEHICLE APPLICATIONS: Dodge (2011-2022 Durango 3.6L & 5.7L, 2018-2022 Durango 6.4L), Jeep (2011-2021 Grand Cherokee 3.6L, 5.7L & 6.4L), Lexus (2013-2018 ES350 3.5L, 2015-2017 NX200T 2.0L, 2018-2021 NX300 2.0L, 2010-2022 RX350 3.5L).Material:Plastic

ADDITIONAL APPLICATIONS: Toyota (2013-2018 Avalon 3.5L, 2012-2017 Camry 3.5L, 2014-2019 Highlander 2.7L & 3.5L, 2011-2013 Sienna 2.7L, 2011-2020 Sienna 3.5L)

DOUBLE MAXIMUM PROTECTION: FRAM automotive replacement engine filter provides 2x the protection compared to standard filters for up to 12,000 miles.

Designed for ventilation applications including HVAC, dryer, grow rooms and tents.

Four layer design makes it more durable and resistant to leaks, tears, and cuts.

Steel-wire spiral structure is flexible and easy-to-install in hard to reach places.

REPLACEMENT Air Intake Hose -Replace your broken air intake hose on your Cadillac XTS Chevrolet Impala and restore drive-ability and fuel economy.

REPLACES PART # 22935937,22887315,20885923

FITMENT -Cadillac XTS 2013-2019 Chevrolet Impala 2014-2019

ENGINEERED POWER: State-of-the-art filtration media provides up to 50% more airflow than disposable paper filters to increase power and acceleration- clogged or dirty engine air filters can reduce your vehicle’s acceleration by up to 10%

EASY INSTALLATION: K&N air filter is pre-oiled and built with simple clamp-on design- one of the easiest and most cost-effective upgrades for your vehicle for quick performance gains

SAVES MONEY: K&N high-flow replacement intake filters will save you $250 over 10 years by avoiding disposable air filters

REPLACEMEN - The factory air intake hose on Nissan Sentra overtime can develop cracks and holes which can result in a check engine light (CEL), poor fuel economy, and hesitation during acceleration. Replace your broken air intake hose and restore drive-ability and fuel economy.

FITMENT - Nissan Sentra 2.0L 2007, 2008, 2009, 2010, 2011, 2012 model years

REPLACES PART # - 16576ET00A ,16576 ET00A ,16576-ET00A,16576-ET000,696-003,696003

Package Dimensions: 12.4 cms (L) x 26.4 cms (W) x 29.2 cms (H).Material:Cellulose Paper

Product Type: Engine Air Filter

Package Quantity: 1

ENGINEERED POWER: State-of-the-art filtration media provides up to 50% more airflow than disposable paper filters to increase power and acceleration- clogged or dirty engine air filters can reduce your vehicle’s acceleration by up to 10%

EASY INSTALLATION: K&N air filter is pre-oiled and built with simple clamp-on design- one of the easiest and most cost-effective upgrades for your vehicle for quick performance gains

SAVES MONEY: K&N high-flow replacement intake filters will save you $250 over 10 years by avoiding disposable air filters

Provides 2X the engine protection

A clean air filter improves air flow and prevents dirt and dust from entering the engine

On-pack directions and illustrations provide clear installation instructions

GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 11HP and up to 21.24 ft.lbs. of Torque

HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed

DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system

Universal replacement air intakes filter

High air flow to increase horsepower and throttle response

This filter is made with two layers of mesh material

VEHICLE APPLICATIONS: Subaru (2013-2015 XV Crosstrek 2.0L, 2013-2018 WRX STI 2.5L, 2013-2014 WRX 2.5L, 2015-2021 WRX 2.0L, 2008-2014 Tribeca 3.6L, 2005-2009 Outback 3.0L, 2005-2019 Outback 2.5L, 2005-2019 Legacy 2.5L)

EXPANSIVE AIRFLOW: With a fine filter media, Extra Guard captures various debris without hampering airflow. Filter attracts dirt like a magnet so that maximum amount of debris stay trapped to prevent entering within the engine.

TRAPS DIRT AND FILTH: Various damaging particles and dust can collect over your engine, however, with FRAM car air filter, Extra Guard entraps these particles for a safer, cleaner, and quality engine performance.

Universal replacement air intakes filter

High air flow to increase horsepower and throttle response

This filter is made with two layers of mesh material

Essential Tesla Model 3 Model Y accessories- HEPA air filter can more effectively adsorb harmful particles and gases, filter particles above 0.3 microns in 30mins.

Our main goal: Premium HEPA Cabin Filters prevents harmful fine particles and dust from entering the vehicle cabin while keeping clean and healthy environment to passengers.

Apply High Quality Air Filter: Melt blown electrostatic layer+ HEPA Filter layer+ Nutshell activated carbon.

Durable Material: made of high quality 304 stainless steel, rust-proof, water-proof, corrosion-resistant, strong, durable and long lasting use.

Powerful function: Adopts an open inner and outer ring structure and fastened with bolts. Smooth surface, torsion-resistant and pressure-resistant, tightly locked and large adjustment range. Provides an excellent seal with a variety of hose materials, effectively solves the problem of liquid and gas leakage of the hose.

Easy to use: Just loosen or tighten the screw of hose clips by a screwdriver to adjust the size, attach hoses to the fitting tightly. Can be applied to secure hoses, pipe, cable, tube, automotive, industrial, boat, etc.

Package Dimensions: 10 L x 8 H x 8 W (inches)

Package Weight : 1 pounds

Country of Origin : United States

GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine and giving an estimated increase up to 16HP and up to 12 ft.lbs. of Torque

HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed

DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system

GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 11HP and up to 12 ft.lbs. of Torque

HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed

DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system

ENGINEERED POWER: State-of-the-art filtration media provides up to 50% more airflow than disposable paper filters to increase power and acceleration- clogged or dirty engine air filters can reduce your vehicle’s acceleration by up to 10%

EASY INSTALLATION: K&N air filter is pre-oiled and built with simple clamp-on design- one of the easiest and most cost-effective upgrades for your vehicle for quick performance gains

SAVES MONEY: K&N high-flow replacement intake filters will save you $250 over 10 years by avoiding disposable air filters

Light-weight and high flow racing performance design. Typical use like : inline air cooling, cool air intake and re-direction, enhancing filter flow rate, improving throttle response and engine performance, reducing engine stalling, improving poor Engine starting

Silicone-Impregnated Fiberglass structure for high temperature application

Steel Wire Reinforced structure enables hose flexibility and durability

Our Focus has always been on building a reputation as the number-one source for quality Auto parts

All genuine parts are built with the engineering expertise

They're the original equipment for Ford, Lincoln and Mercury vehicles and help restore new-vehicle-like performance and reliability

ENGINEERED POWER: State-of-the-art filtration media provides up to 50% more airflow than disposable paper filters to increase power and acceleration- clogged or dirty engine air filters can reduce your vehicle’s acceleration by up to 10%

EASY INSTALLATION: K&N air filter is pre-oiled and built with simple clamp-on design- one of the easiest and most cost-effective upgrades for your vehicle for quick performance gains

SAVES MONEY: K&N high-flow replacement intake filters will save you $250 over 10 years by avoiding disposable air filters

INCREASES HORESPOWER: AIRAID performance air intake systems feature an aerodynamically-engineered intake tube, designed to accelerate airflow to your engine and reduce turbulence—helping increase your vehicle’s performance

SUPERIOR FILTRATION: AIRAID performance intake systems are engineered to provide a smooth, unimpeded path for airflow to your engine—keeping the air cooler and more oxygen-dense. Injecting more oxygen-rich air into the cylinders allows the engine to burn fuel more efficiently during combustion, offering you an increase in performance

EASY INSTALL: These simple-to-install, sophisticated systems help maintain proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go—and enjoy your vehicle’s horsepower gains