Best Sanyinghe in 2026

1/8" NPT thread plug gage

standard: ANSI/ASME B1.20.1

Right hand( RH)

Quickly and easily size bolts, screws, nuts and twist drills

Features ruler marked with inches and millimeters

Gauge metric hex nuts and washers by holding under metric holes

Each leaf is marked with thread pitch

With locking clamp

Inch and metric sizes

Quickly and accurately determine the screws size

Recommends the drill bit or tap size needed for the screw

Standard & Metric

It is 55 Degree & 60 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct

Specification: Metric & Imperial & US; Metric: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25

Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G; US: 8, 10, 11, 14, 19, 28

V-Wac Welding Gauge

Use to: Checks undercut, crown height, porosity, pits

Only Metric

V-WAC Single Weld Gage

Use to: Checks undercut, crown height, porosity, pits

only Inch

Includes a total of 3 diffrent gauges!

1) Drill Bit Gauge (Fractional & Metric) Color: Blue

2) Internally Threaded Screw Gauge Color: White

Measures all metric threads from .5mm to 6mm

48 wires in 16 different sizes. ~ Measures all 60° threads

3 to 48 threads per inch

【Clear Marking】 : There is a small hole at both ends, which is convenient for adjustment and disassembly with screws. You can easily rotate the thread pitch gauge blade where you press the tooth thread gauge. The numbers are clearly marked and easy to read.

【Material】 : Screw gauge tool set is made of stainless steel and processed with chrome finish. Surface polished smooth, applying anti-rust oil to prevent rust.good resilience, elegant appearance.

【Measuring Range】: 51 pcs America SAE type measuring range is 4-84; 52 pcs Metric & America SAE Type & British Whitworth Metric is 0.25-6.0mm, Imperial is 4G-62G US: 8, 10, 11, 14, 19, 28.

★【What You Get】: In this thread pitch gauge kit, it include 51Pcs America SAE type, 52pcs metric and Inch type, 3pcs metric & america SAE type & British Whitworth, they are well packed in a plastic box, easy for carry and store.

★【High Quality】: All the thread pitch gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust.

★【Measuring Range】: 51pcs America SAE type measuring range is 4-84; 58pcs Metric & America SAE Type & British Whitworth Metric is 0.25-6.0mm, Imperial is 4G-62G US: 8, 10, 11, 14, 19, 28.

【Function】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool; 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth

【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size;Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size

【Material】--Stainless steel and chrome finish, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability

[Cut Wood Threads]: Use the Deadwood Crafted Tools Plastic Dowel Jigs Woodworking Thread Tap Die Kit to cut 1/2-inch external and internal threads for fasteners and holes; 8 thread per inch

[Premium Cutting]: Tapping tool set die and thread cutter screw hole ensures smooth, clean cuts for hard wood blocks and soft wood dowels for woodworking projects; 7/16-inch tap hole for 1/2-inch (1.2cm) dowel

[How to Use]: Use oil lubricant (not included) to soften wood and 7/16-inch drill bit; Align dowel to wood threading kit threader hole, press down and turn to create external threads; Included threaded insert drill tap set tool cuts threaded holes in wood blocks to connect threaded large dowels

Made of quality stainless steel and processed with chrome finish, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability

The America SAE type thread pitch gauge has 51 pieces tablets.The metric and Inch and SAE type thread pitch gauge has 58 pieces tablets, 24 tablets of which are metric, 28 tablets are Inch and 6 tablets are America SAE

Well Made: The toothed edges are sharply defined and the numbers are stamped and easy to read

Material: the screw gauge tool set is made of stainless steel and processed with chrome finish, it combines high strength with good resilience and elegant appearance; It won't get rusted easily and owns long lasting durability

Package content: the screw gauge tool set contains 3 x screw pitch gauge and 3 x center gauge

Thread pitch gauge function: can be applied to measure the pitch of the thread

29° ACME Thread Gauge-The 29 degree stainless steel acme thread gauge is a single piece type and it is applied to measure thread and external thread tooth pitch.The acme thread gauge range:1-10TPI,the pitch:1,1-1/3,1-1/2,1-3/4,2,2-1/2,3,4,5,6,7,8,9,10

Suitable for-Standard gauge for check the angle of screw cutting tools,check the width of screw cutting tools and set the position of screw cutting tools

Material of stainless steel-This acme thread gauge is made by stainless steel.Not easy to rust and not easy to bend.You needn’t to use anti-rust oil or take any anti-rust ways.Just put the 29 degree acme thread gauge in a dry place and it won’t rust

√ Screw thread pitch cutting gauge tool set.

√ Size: Metric (mm) - 60° Whitworth - 55°

√ Typically used to check the thread size determination is correct.

Function: Thread gauges accurately measures internal and external screw threads with thread blades of varied size

Material and surface finishing: Thread gauges are made of stainless steel and processed with chrome finish, it combines high strength, good resilience, elegant appearance. Most importantly, it won't get rusted easily and owns long lasting durability

Well made: The toothed edges are sharply defined and the numbers are stamped and easy to read

【Material】The screw gauge tool set is made of stainless steel and processed with chrome finish, it combines high strength with good resilience and elegant appearance; It won't get rusted easily and owns long-lasting durability

【Package content】The screw gauge tool set contains 3 x screw pitch gauge and 3 x center gauge

【Thread pitch gauge function】Can be applied to measure the pitch of the thread

Easy to Use - Incorporating convenience and excellence, Starrett tools are designed to be user-friendly. Whether you're an experienced professional or an amateur when it comes to home improvement, our tools are handy and accessible.

Meets Strong Demands - Committed in providing customers with consistent and reliable solutions, Starrett has set the standard for precision, quality and innovation. Our products are long-lasting, robust with excellent service and performance.

Accuracy You Can Count On - Starrett precision measuring tools exceed accuracy and performance requirements of national and international standards, providing excellent fine precision tools for industrial, professional and consumer markets worldwide.

Inch, 4, 6, 8, 10, 11, 11-1/2, 12, 13, 16, 20, 28, 32, 40, 56 TPI Metric, 0.5, 0.75, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 6 MM

Thread pitch size is stamped on each gage

Accurate Tool- Our convenient nut and bolt gauge is an accurate tool that allows you to quickly and easily check the size of nuts and bolts, while the permanent mark on each gauge ensures accuracy, so that your measurements are perfect!

Save Time & Money- With 26 male/female gauges - 14 inch & 12 metric - on a convenient cable loop, you can quickly and easily check to see if the sizes match before buying replacements. Save valuable time and avoid returns with specialty tools.

Durability- This thread gauge SAE and metric is crafted from strong stainless steel, making it highly durable and able to withstand a variety of conditions. The inch & metric gauges are clear zinc , making them long lasting and easy to read.

Measure the gauges of your nuts, bolts, screws, nails, PVC, copper, and more

Includes one metric thread gauge in millimeters and one imperial thread gauge in inches

Metal construction with laser-etched scales provides maximum accuracy and durability

ITEM NAME-29 Degrees ACME Screw Pitch Gauge 16pcs set, measuring range: 1-12in

GOOD FUNCTION- Screw Pitch Gauge Accurately measures T-Thread with thread blades of varied size; Used for checking tool angle while cutting threads in metal turning lathes

HIGH QUALITY MATERIAL-The Screw Thread Pitch gage is made of stainless steel, through quenching processing, strong hardness ,elegant appearance; It won't get rusted easily and owns long lasting durability

√ Size: Metric (mm) - 60° and Whitworth Imperial - 55°.

√ Metric Size: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25

√ Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G; --US: 8, 10, 11, 14, 19, 28

51 BLADES SCREW PITCH GUAGE FOR THREAD SIZE CHECKING OF VARIOUS SCREWS & BOLTS

55 DEGREE BRITISH WHITWORTH BSW & 60 DEGREES METRIC THREAD PITCH GAUGE

This pitch gauge accurately measures internal and external screw threads.

0.25, 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 1, 1.1, 1.2, 1.25, 1.3, 1.4, 1.5, 1.6, 1.7, 1.75, 1.8, 1.9, 2, 2.5

Thread pitch size is stamped on each gage

[Adjusted Freely]: Thread measuring gage is using rotary switch, which can be freely adjusted. Mini size and compact, the pitch measuring gage won't occupy too much space, carry it around easily with the convenience

[Magnetic Head]: The thread plug gage, through quenching processing, strong hardness, head with a magnetic. Narrow-leaved designed to measure the external and internal threads - even in small holes

[Precise Measurement]: Thread measuring gage comes with precise measurements and simple design, which can be widely used and durable. Measuring range: 0.25 - 6.00mm/0.0098" - 0.23"

Used or grinding ANS setting tools

To cut acme threads whose side have an inclination 12 1/2 inch

29 degree included angle

Set Includes: -M12 X 1.75 -M10 X 1.5 -M8 X 1.25 -M6 X 1.0 -M5 X 0.8 -M4 X 0.7 -M3 X 0.5

Material: Steel #GCr15; Hardness HRC59--63

ANSI Standard; Taper Lock Design