Best Saris in 2026

Stackable riser block for rear-mounted cycling trainers

Unique 3-level design lets you select ideal training height

Stacks with 2nd block to simulate climbing workouts

Supports up to 12 adjustment levels with 2nd block

Virtually indestructible injection-molded construction

STURDY AND SAFE - Made of composite materials that guarantee the durability of your wheel riser block. This bike trainer block is wide and solid enough to place your bike on it, while avoiding rocking or moving.

COMPATIBILITY - Works perfectly with any rear wheel-mounted cycling trainers. The Saris climbing riser block is able to fit up to 2.2” tires in any of its 3 grooves.

STRONG & RUST FREE: Strongest frame on the market; injection-molded arms and legs are the strongest on the market

CLEAN, SLEEK LOOK: Arc–based design separates bikes on different levels; spring buckle straps with vinyl-coated hooks

MADE IN USA: Hand built in Madison, Wisconsin with 100% recyclable materials

CONNECTIVITY: Connects to indoor cycling apps with dual ANT+ FE-C and Bluetooth FTMS standards. Zwift and BKOOL certified. Includes one month subscription to Rouvy virtual training app

COMPATIBILITY: Thru-axle compatible for rear hub widths of 142 mm or 148 mm. Quick-release compatible for rear hub widths of 130 mm and 135 mm. Compatible with Shimano/SRAM 8-11 speed cassettes

FEATURES: Folding legs, carrying handle, built in front wheel block, and cooling system that moves air through trainer to keep it cool

STURDY AND SAFE - Made of composite materials that guarantee the durability of your indoor bike riser. This bike trainer block is wide and solid enough for you to place your bike on it, while avoiding rocking or moving.

GEAR UP - Make sure that you complete your indoor trainer setup with the Saris leveling block. It will raise your front bicycle tire by 1.1 inches (2.8 cm) off the ground, keeping it level with your cycling trainer and providing a more natural feeling indoor ride.

Secures to your truck bed or SUV tie-downs

Made with a 6061-T6 powder coated aluminum base.Can be mounted on any flat surface.9mm standard sized quick release skewer.Coated nut and quick release level for tool-less installation

Secures to your truck bed or SUV tie-downs

Made with a 6061-T6 powder coated aluminum base

Can be mounted on any flat surface

9mm standard sized quick release skewer

Coated nut and quick release level for tool-less installation

RUGGED 2-INCH ROUND 16-GAUGE STEEL FRAME: Tested to the combined weight (rider and bike) of 300 pounds

STABLE WIDE FRAME: Adjustable footpads for a stable ride on most surfaces; Compatible with virtual training apps.

Made from rugged 2-inch round 16-gauge steel

Comes with a lifetime warranty from cycleOps

Adjustable footpads for a stable ride on most surfaces

COMPATIBILITY: Accommodates bicycles with wheelbases up to 56", can be used with bike tire widths up to 2.5"

ADD-ON AVAILABLE: Two-bike add-on is available (sold separately) for expanded six-bike capacity

Triple-track bike rack designed to mount to floor or SUV or truck bed

Holds your bikes and bike wheels in an upright, fully secure position

Powder-coated aluminum frame; also mounts on garage or house walls

Staggers or angles traps and wheel holders to maximize capacity

Fork-mount traps and wheel mounts sold separately

CONNECTIVITY: Compatible with indoor cycling apps when paired with your favorite speed or cadence sensor. Compatible with Zwift and other indoor cycling apps. Includes one month subscription to Rouvy virtual training app

COMPATIBILITY: COMPATIBILITY: Trainer comes with a quick release skewer that will work on most bikes in place of their own quick release, if a bike has a thru axle you will need an additional adapter to make the bike fit (9712t, 9707t, 9733t). Thru Axle Adapter: Sold separately for 142x12mm and 148x12mm bikes.

FEATURES: Wheel on (no need to remove wheel or disasemble bike), foldable frame, leveling block, and cooling system that moves air through trainer to keep it cool

CONNECTIVITY: Compatible with indoor cycling apps when paired with your favorite speed or cadence sensor. Includes one month subscription to Rouvy virtual training app

COMPATIBILITY: Steel quick release skewer included for common road and mountain bike frames

FEATURES: Foldable frame, leveling feet, adjustable handlebar-mounted shifter, and cooling system that moves air through trainer to keep it cool

CONNECTIVITY: Included speed sensor connects you with Rouvy, Zwift and other indoor cycling apps. Includes one month subscription to Rouvy virtual training app

COMPATIBILITY: Trainer comes with a quick release skewer that will work on most bikes in place of their own quick release, if a bike has a thru axle you will need an additional adapter to make the bike fit (9712t, 9707t, 9733t). Thru Axle Adapter: Sold separately for 142x12mm and 148x12mm bikes.

FEATURES: Wheel on (no need to remove wheel or disasemble bike), foldable frame, leveling block, and cooling system that moves air through trainer to keep it cool

Injection -molded arms and legs are the strongest on the market

Built with 100% recyclable, non-rusting materials

Ratcheting anti-sway straps secure and stabilize bikes.

Arc-based design fits over most spoilers, and separates bikes on different levels

STRONG & RUST FREE: Strongest frame on the market; injection-molded arms and legs are the strongest on the market

CLEAN, SLEEK LOOK: Arc–based design separates bikes on different levels; spring buckle straps with vinyl-coated hooks

MADE IN USA: Hand built in Madison, Wisconsin with 100% recyclable materials

FULL TILT: This combo cargo carrier tilts away when loaded - and when it's not - for easy vehicle access.

LOAD AND GO: Raised side rails and tie-down points make for fast and secure transport

FEATURES: Works with 2" hitch receivers, built-in locks and external reflectors for extra security and visibility, adjustable arms and wheel trays fit almost any type of bicycle, ratcheting arms pivot on case hardened brackets for superior strength

Integrated Cadence, speed and power data - no external sensors needed

Swift certified

CONNECTIVITY: Connects to indoor cycling apps with dual ANT+ FE-C and Bluetooth standards. Zwift certified. Includes one month subscription to Rouvy virtual training app

COMPATIBILITY: Steel quick release skewer included for common road and mountain bike frames

FEATURES: Foldable frame, resistance knob, and cooling system that moves air through trainer to keep it cool

Made in the USA

LOCKING CABLE

Secure bikes to your bike rack to reduce bike theft, Includes 2 keys

Eight foot, 10mm braided stainless steel locking cable

COMPATIBILITY: Compact uni-body frame fits a variety of vehicle makes and models, just like bigger bike racks do

FEATURES: Ratcheting straps and anti-sway secure bike to rack, rust-free injection-molded plastic, and only weights 2 lbs

RECYCLED MATERIALS: Built with 100% recyclable materials

Designed for both performance and value; sleek design is ideal for any storage area; cushioned pads protect floors and walls

Made in the USA; built in Madison, Wisconsin; one-year warranty

COMPATIBILITY: Rack arms adjust to fit most sedans, hatchbacks and vans

FEATURES: Folds for compact and convenient storage, coated hooks protect vehicle's finish, heavy-duty foam pads protect vehicle's finish

Includes: thru axle washers, end caps with bolts, shorter bolt action slider tube.

Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers

Fits variety bikes with 20- inch to 29- inch tires and is compatible with most disc brakes

Made in USA.Folds small and is lightweight for easy mobility.Strong and stable which helps to hold heavier bikes.Holds bikes by rear axle with soft rubber dipped fingers.Fits variety bikes with 20- inch to 29- inch tires and is compatible with most disc brakes.Made in USA

Folds small and is lightweight for easy mobility

Holds bikes by rear axle with soft rubber dipped fingers, minimizing any contact with the bike

Fits variety bikes with 20" - 29" tires, and is compatible with most disk brakes

Designed and Manufactured in Madison, Wisconsin

Lifetime Warranty

FEATURES: Spring buckle straps with vinyl-coated hook, ratcheting anti-sway straps for a secure hold, and articulated rubber feet to protect paint

COMPATIBILITY: Compatible with most vehicles

MADE IN USA: Hand built in Madison, Wisconsin; built with 100% recyclable materials

FEATURES: Adjustable arm and padded hooks secures bike frame, center arm folds down for access to rear of vehicle when not loaded with bikes

MADE IN USA: Hand built in Madison, Wisconsin

For use with triple tracks or single tracks

Stores front wheel or extra wheels on mount's load bars

Accepts wheel with little or no quick-release adjustment

Includes mounting hardware for easy installation