Best Sawstop in 2026

36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection.

SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.

UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0. 010” maximum gap.

Revolutionary SawStop protection: Standard brake cartridge stops the spinning blade on contact with skin reducing the chances of a catastrophic injury

Compatible with all standard 10″ blades. Replaces TSBC-10R2 (equivalent to TSBC-10R2). Not compatible with CB Model Saws (CB Model Saws use TSBC-10L)

Compatible with all woods and other non-conductive materials

40 Tungsten carbide-tipped teeth

1/8" Kerf

Rake angle 15°

52-INCH T-GLIDE FENCE ASSEMBLY: The 52-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection.

SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.

UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0.010” maximum gap.

36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection.

SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.

UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0.010” maximum gap.

Product 1: 40 Tungsten carbide-tipped teeth

Product 1: 1/8" Kerf

Product 1: Rake angle 15°

Maximize your shop space with the in-line installation

Delivers a precision experience complemented by SawStop line of RT products

Precision ground to .0118”

Collect 99% of above-table dust

Independent lateral slides minimize blade exposure

Low profile to allow for cuts as narrow as 3/4 of an inch

Three quick pumps of the foot pedal raises the saw

Four 360-Degree casters allow the saw to easily move in any direction

Hydraulic piston assist lift

Revolutionary SawStop protection: Standard brake cartridge stops the spinning blade on contact with skin reducing the chances of a catastrophic injury

Compatible with all standard 10″ blades. Replaces TSBC-10R2 (equivalent to TSBC-10R2). Not compatible with CB Model Saws (CB Model Saws use TSBC-10L)

Compatible with all woods and other non-conductive materials

Precision balanced

Product Type: SAW BLADE

Package weight: 0.794 kg

Compatible with the 36-inch and 52-inch SawStop Contractor Saws.

Fits all SawStop T-Glide rail systems

Requires Sawstop Dust Collection Blade Guard.

Ergonomic one-foot operation mechanically lifts the saw in a single motion

When not engaged, the cabinet rests directly on the floor

Easily move your saw around your shop. Fully welded 1/4" rigid steel construction, hard wearing black powder coat finish

Powder coated steel construction

Stamped steel support plate

Three roller bars

Maximum Router diameter: 4 1/4"

Minimum Router diameter: 3 1/4"

Phenolic insert ring diameter: 3 3/4"

package height : 1.524 cm

package length : 27.432 cm

package width : 27.432 cm

Power Tools

Package Dimensions: 40.64 H x 1.777 L x 12.7 W (centimeters)

Package Weight: 0.566 kilograms

Blade guard dimensions 3 1/2” x 18 1/2”

Distance between blade and end of extension table 35 3/4” to 68”

Inner dust tube diameter 3” outer dust tube diameter 4”

Product Type:Cutting Tools

Item Package Dimension:1.524 Centimeters L X 12.7 Centimeters W X 40.64 Centimeters H

Country Of Origin: Taiwan, Province Of China

Designed to quickly give you accurate, repeatable measurements

Compatible with all SawStop Router fences

Top-mounted dovetail track allows for easy travel and quick lockdown

Precision ground to .0118”

Aligns perfectly with table, rails and extension table

40 more pounds means added stability and reduced vibration

Assembly includes: rt-c27 27" cast iron table, rt-f27 27" fence, rt-psw power switch, and rt-st2 support legs

Cast iron table dimensions: 27" x 16"

Router plate opening: 11 3/4" x 9 1/4"

Product 1: Assembly includes: rt-c27 27" cast iron table, rt-f27 27" fence, rt-psw power switch, and rt-st2 support legs

Product 1: Cast iron table dimensions: 27" x 16"

Product 1: Router plate opening: 11 3/4" x 9 1/4"

This sliding table is built for versatility. Micro-adjust for detail cuts, and crosscut full sheets with the 55" travel and 48" crosscut capacity.

The fence is at least 15% larger than typical crosscut sliders, spanning 43" and extending past 58".

Adjust the table to fit your needs.

Fills the space between the right saw wing and the SawStop RT Router table installed between the rails

Precision ground to .0118”

Provides full cast iron work surface

SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch

RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe

36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection

Three quick pumps of the foot petal raises the saw

Four 360Degree casters allow the saw to easily move in any direction

Hydraulic piston assist lift

Compatible with the professional cabinet saw with 52” rip capacity and a SawStop RT Router table installed between the rails

Table made of laminated wood with a matte black finish

Also fills the space between the rails on a SawStop professional cabinet saw or contractor saw with 36” rip capacity without Router table

Holds your workpiece safely against the Router fence for added stability

Stackable featherboards for extra support for taller stock

Easy-grip lock knobs compatible with all SawStop Router tables and fences

package height : 5.0 "

package length : 7.0 "

package width : 7.0 "