Best Schluter Systems in 2026

Membrane covers 108 Sq Ft

Allows Perfect Bond With Thin-set Mortar

Tiles Can Be Installed Directly On Top of Kerdi Membrane

Made Of Soft Polyethylene ( have Crack Prevention capabilities )

3-1/2" depth

Fully waterproof and vapor-tight

Made of Kerdi Board

Manufactured by Schluter Systems

Eliminates need for cement board or gypsum wall backer

QUICK & EASY TO INSTALL

Perimeter height is 1-5/8 in.

Eliminates the need for a mortar bed

KIT: Schluter Kerdi Shower Kit is an all-inclusive package containing each of the integrated family of components required to create a maintenance-free watertight shower assembly without a mortar bed.

WATERPROOFING: All prefabricated components (shower curb and shower pan) are pre-waterproofed, which saves time during installation.

EASE OF INSTALLATION: the Kerdi shower curb and Kerdi shower tray are made of high density polymer. The material is lightweight and trimmable to achieve the desired shower base size.

WARRANTY: Kerdi shower is covered by the 15 years Schluter Systems manufacturers warranty when built according to the manual.

KIT: Schluter Kerdi Shower Kit is an all-inclusive package containing each of the integrated family of components required to create a maintenance-free watertight shower assembly without a mortar bed.

WATERPROOFING: All prefabricated components (shower curb and shower pan) are pre-waterproofed, which saves time during installation. The kit also includes all the items you need to waterproof other components of your shower: valve seal (4-1/2 in), pipe seal (3/4 In), 4 inside corners, 2 outside corners, kerdi strainer (KD-STR) and Wedi Joint sealant tube (10.5 oz)

EASE OF INSTALLATION: the Kerdi shower curb and Kerdi shower tray are made of high density polymer. The material is lightweight and trimmable to achieve the desired shower base size.

WARRANTY: Kerdi shower is covered by the 15 years Schluter Systems manufacturers warranty when built according to the manual.

KIT: Schluter Kerdi Shower Kit is an all-inclusive package containing each of the integrated family of components required to create a maintenance-free watertight shower assembly without a mortar bed.

WATERPROOFING: All prefabricated components (shower curb and shower pan) are pre-waterproofed, which saves time during installation. The kit also includes all the items you need to waterproof other components of your shower: valve seal (4-1/2 in), pipe seal (3/4 In), 4 inside corners, 2 outside corners, kerdi strainer (KD-STR) and Wedi Joint sealant tube (10.5 oz)

EASE OF INSTALLATION: the Kerdi shower curb and Kerdi shower tray are made of high density polymer. The material is lightweight and trimmable to achieve the desired shower base size.

WARRANTY: Kerdi shower is covered by the 15 years Schluter Systems manufacturers warranty when built according to the manual.

KERDI-SEAL-PS Pipe Seal 3/4" and KERDI-SEAL-MV Mixing Valve Seal 4-1/2"

KERDI-FIX Sealing and bonding compound, white

KIT: Schluter Kerdi Shower Kit is an all-inclusive package containing each of the integrated family of components required to create a maintenance-free watertight shower assembly without a mortar bed.

WATERPROOFING: All prefabricated components (shower curb and shower pan) are pre-waterproofed, which saves time during installation. The kit also includes all the items you need to waterproof other components of your shower: 2” PVC Flange, valve seal (4-1/2 in), pipe seal (3/4 In), 4 inside corners and 2 outside corners.

EASE OF INSTALLATION: the Kerdi shower curb and Kerdi shower tray are made of high density polymer. The material is lightweight and trimmable to achieve the desired shower base size.

WARRANTY: Kerdi shower is covered by the 15 years Schluter Systems manufacturers warranty when built according to the manual.

KIT: Schluter Kerdi Shower Kit is an all-inclusive package containing each of the integrated family of components required to create a maintenance-free watertight shower assembly without a mortar bed.

WATERPROOFING: All prefabricated components (shower curb and shower pan) are pre-waterproofed, which saves time during installation. The kit also includes all the items you need to waterproof other components of your shower: valve seal (4-1/2 in), pipe seal (3/4 In), 4 inside corners, 2 outside corners, kerdi strainer (KD-STR) and Wedi Joint sealant tube (10.5 oz)

EASE OF INSTALLATION: the Kerdi shower curb and Kerdi shower tray are made of high density polymer. The material is lightweight and trimmable to achieve the desired shower base size.

WARRANTY: Kerdi shower is covered by the 15 years Schluter Systems manufacturers warranty when built according to the manual.

DITRA-HEAT cable is thin, durable, and energy efficient. (Input: 240V, Output: 12.75W/SqFt)

Heats 225 square feet (Contains a 744 spool with 10 ft armored power lead)

Easily snaps into uncoupling membrane, no clips or fasteners required

No self-levelers required to encapsulate heating cables (no need to wait for curing)

KSK1830PVC

Drain grate sold separately

141.0 Line Ft

240V

339.4 Line Ft

240V

WIFI TOUCHSCREEN PROGRAMMABLE THERMOSTAT - The DHERT104/BW touchscreen programmable Wi-Fi thermostat is designed to control radiant floor heating cables. This thermostat has six programming periods per day, a set-up wizard and an energy log. The Wi-Fi functionality allows the Ditra-Heat floor warming system to be controlled from a mobile app or online. It has a built-in 5 mA ground fault circuit interrupter (GFCI) and works with 120-Volt and 240-Volt cables.

175.2 SQ FT DITRA HEAT DUO MEMBRANE -polypropylene thermal break membrane with a cutback stud structure and an anchoring fleece laminated to the underside. DUO membrane is designed to secure the DITRA-HEAT-E-HK electric floor heating cables and provide uncoupling, waterproofing, vapor management and load support to ensure a long-lasting tile installation.

ENERGY EFFICIENT - The thermal break directs heat up into the tile rather than down into the subfloor, reducing energy waste and resulting in up to 70% faster floor heating when applied over concrete substrates.

SAFETY: Includes either Nuheat MatSense Pro OR SunTouch Loudmouth monitor electric fault indicator. This device sounds an alarm if the heating wire is cut or damaged, identifying a problem with the installation before the heat wire is tiled over. Suntouch plastic 3/8" x 1/2" U-notch cable trowel is designed specifically for heat cables installation and eliminates the risk of damaging the heating cable while applying mortar.

WIFI TOUCHSCREEN PROGRAMMABLE THERMOSTAT - The DHERT104/BW touchscreen programmable Wi-Fi thermostat is designed to control radiant floor heating cables. This thermostat has six programming periods per day, a set-up wizard and an energy log. The Wi-Fi functionality allows the Ditra-Heat floor warming system to be controlled from a mobile app or online. It has a built-in 5 mA ground fault circuit interrupter (GFCI) and works with 120-Volt and 240-Volt cables.

243.7 SQ FT DITRA HEAT MEMBRANE - polypropylene membrane with a cutback stud structure and an anchoring fleece laminated to the underside. The membrane is designed to secure the DITRA-HEAT-E-HK electric floor heating cables and provide uncoupling, waterproofing, vapor management and support to ensure a long lasting installation.

EASE OF INSTALLATION: The Heat kit includes all the components you need to build a long-lasting and reliable heated floor system. Practical design of the components makes the installation quick and easy.

SAFETY: Includes either Nuheat MatSense Pro OR SunTouch Loudmouth monitor electric fault indicator. This device sounds an alarm if the heating wire is cut or damaged, identifying a problem with the installation before the heat wire is tiled over. Suntouch plastic 3/8" x 1/2" U-notch cable trowel is designed specifically for heat cables installation and eliminates the risk of damaging the heating cable while applying mortar.

444.0 Line Ft

120V

Schluter Systems Ditra Heat Thermostat is both eco and user-friendly. It comes with a sensor, allowing for precise temperature control with multiple programmable periods per day

Schluter Systems Ditra Heat WiFi Thermostats for home with phone app are the convenient option to control your floor heating cable with or without a heat mat

SHOWER TRAY: the pre sloped shower tray KSLT1220 (48 Inches x 48 Inches) is machine fabricated to ensure proper water drainage.

WATERPROOFING: All prefabricated components (shower curb and shower pan) are pre-waterproofed which saves time durring installation. The kit also includes all the items you need to waterproof other components of your shower: valve seal (4-1/2 in), pipe seal (3/4 In), 4 inside corners, 2 outside corners, kerdi-line strainer (KLVZSF) and Wedi Joint sealant tube (10.5 oz)

EASE OF INSTALLATION: the Kerdi shower curb and Kerdi shower tray are made of high density polymer. The material is lightweight and trimmable to achieve the desired shower base size.

WARRANTY: Kerdi shower is covered by the 15 years Schluter Systems manufacturers warranty when built according to the manual.

WIFI TOUCHSCREEN PROGRAMMABLE THERMOSTAT - The DHERT104/BW touchscreen programmable Wi-Fi thermostat is designed to control radiant floor heating cables. This thermostat has six programming periods per day, a set-up wizard and an energy log. The Wi-Fi functionality allows the Ditra-Heat floor warming system to be controlled from a mobile app or online. It has a built-in 5 mA ground fault circuit interrupter (GFCI) and works with 120-Volt and 240-Volt cables.

158.4 SQ FT DITRA HEAT DUO MEMBRANE -polypropylene thermal break membrane with a cutback stud structure and an anchoring fleece laminated to the underside. DUO membrane is designed to secure the DITRA-HEAT-E-HK electric floor heating cables and provide uncoupling, waterproofing, vapor management and load support to ensure a long-lasting tile installation.

ENERGY EFFICIENT - The thermal break directs heat up into the tile rather than down into the subfloor, reducing energy waste and resulting in up to 70% faster floor heating when applied over concrete substrates.

SAFETY: Includes either Nuheat MatSense Pro OR SunTouch Loudmouth monitor electric fault indicator. This device sounds an alarm if the heating wire is cut or damaged, identifying a problem with the installation before the heat wire is tiled over. Suntouch plastic 3/8" x 1/2" U-notch cable trowel is designed specifically for heat cables installation and eliminates the risk of damaging the heating cable while applying mortar.