Best Sealux Marine Products in 2026

Pair SeaLux Marine Marine Grade corrosion-resistant hinges Stainless Steel 3" x 1.5" Door Hinge

these gleaming, polished Stainless Steel Door Hinges will prove an attractive addition wherever they're used

Constructed of stamped 304 stainless steel

use with thru-hub exhaust propellers on Mariner, Mercury, Mercruiser.

fit For standard 1-1/16 hex nut, and lock for tab locking washers

Prop Wrench for Mercury, Mercruiser, OMC Cobra, and more.

Pair of SeaLux Marine 316 Stainless Steel 180 degree flush mount 2-3/4" x 1-5/8" Hatch Hinges for boat, RV

SeaLux 180 degree hinges fit flush in your boat and fold back 180 degrees so that your hatch can lay flat in the open position. They are ideal for flats and fishing boats.

Constructed of stamped corrosion-resistant 316 stainless steel.

Fabricated from 304 stainless steel, Corrosion resistance.

Highly mirror polished finish and elegant esthetical design

The space saving folding design is also equipped with molded silicone retainer arms to adjust to varying size of cans, cups, cozies and mugs.

SeaLux Marine Extra Cup Mount Set for Removable Folding Pontoon, gunwale Ladders 1-1/4" tubing / Ladder Insert Plugs

Fits ladder tubing up to 1-1/4" outside diameter. Easily attach by dropping ladder hoops into cups.

Requires 1-5/8" cut holes to mount to the deck of your pontoon.

SeaLux Marine Bimini Top Nylon Head Pull Pin with Lanyard for swivel ball deck hinge 3/16" (4.76 mm)

quick release pull pin dia. 3/16" (4.76 mm), use on Bimini Top ball & socket fittings

Lanyard cable made of 304 Stainless Steel

Constructed from passivated stainless steel, this bow eye measures approximately 6 1/2" (L) x 3" (W) x 3/4" (D) overall.

Stainless Steel Washers and Hex Nuts included

These rugged bow eyes, when transom-mounted, are ideal as ski tows

Pulls anchor tight and keeps it snug against its roller. Cam action creates up to 200 lb. tension with minimal effort.

Use with windlass, anchor rollers and anchor mounts.

For anchors to 90 lb. Dimension: 8-1/4"L 1-3/8"W .

SeaLux Marine 316 Stainless Steel Side Mount Oarlock Sockets for 1/2" shank.

These Side Mount Oarlock/Rowlock Sockets are constructed from a Mirror Polish finish 316 Stainless Steel.

Use for fresh water or Salt water, perfect for Sea Kayak.

SeaLux Surface Mounting Sockets for Removable Folding Transom Ladders Pontoon/Gunwale Mount Ladders

Bracket mounts to hull or deck for attaching latch type boarding ladders and cockpit steps.

Stamped stainless steel self-locking Keyhole design keeps ladder in place yet allows for easy ladder removal.

21.25" long, 4" wide, 6" high

Mounting plate measures 3.75" x 8"

Many types of anchors up to 45# on boats up to 46'

SeaLux Marine Flag Pole construction of heavy duty gauge Stainless Steel

32" long Flag Pole, stock Ø 1" (25 mm) with Welded Stud for Quarter-turn twist lock pole base.

Proudly display your flag in traditional boating style with this highly polished stainless steel flagpole.

SeaLux Marine Products.Stainless Steel Over Platform Boarding Ladder max. load capacity 400 lbs.

Marine Grade Stainless Steel Tubing.

Ladder Folds Onto Swim Platform for Easy Stowing

This SeaLux Oval Deck Pipe is made of high quality marine grade 316 stainless steel cast and machined to the highest tolerances.

This high quality 316 stainless steel spring hinged deck pipe has a oval rope/chain deck pipe opening which allows large thimble to pass thru deck pipe and slot accommodates up to 1/2 x 1 1/2" chain, remaining in place when cover is closed.

Cover is hinged and spring loaded eliminating rattling when in closed position.

SeaLux Marine 3/8" stock Fixed Welding Plate Bow Eye Stern Eye 4-1/2"

Constructed of polished 304 stainless steel and have welded base plates to minimize potential corrosion and offer superior sealing.

this U-bolt measures approximately 2 1/4" W x 5" H x 3/4" D overall and has (2) approximate 3/8" diameter x 3 1/8" long threaded bolts with 1 7/16" apart center on center.

Ridged rubber grips at the base of the boat hooks help prevent slippage when in use.

two and three section telescoping boat hooks are made of anodized aluminum tubing, a fiber reinforced nylon hook, and a soft tip to help prevent scratches.

These deluxe telescoping boat hooks feature a twist lock mechanism that helps hold the hook at the desired length.

SeaLux 316 Stainless Steel I.d. 2-1/4" Round Oarlock

Durable 316 Stainless Steel heavy-gauge cast steel with a mirror polish finish offers long-lasting performance.

Inside diameter of oarlock is 2". Fits most standard size oars. Sold in pairs.

SeaLux Marine Water Resistant LED Courtesy Light 3"x 1 1/2" with Stainless Steel Rim (12 V) for boat, Yacht, RV, Camper

This White Light LED Courtesy Light from SeaLux Marine is 12V and has 4 LEDs producing a beautiful, soft illumination perfect for yachts and marine vessels.

Water Proof IP 65,O-ring gasket allows for interior and exterior use.This SeaLux Marine courtesy light has a corrosion resistant Stainless Steel Top Plate and is recessed for perfect mounting.

SeaLux Marine Premium 316 SS Hatch Lid Stay and Adjuster 6" to 11"

This stay is suitable for securing hatches partially or fully open. Load Capacity: 33 lbs.

Marine grade construction. Sliding frame is all stainless steel with stainless mounting frame.

Constructed of stainless steel, this ladder is used for quick and easy storage. Features a red push-to-release button.

Three Step Under Platform Telescoping Swim Ladder, 34" 16" Length, 12" Width .

The convenience of smooth telescoping action combined with the stability of a sliding under-platform bracket.

This New Release Jumbo Cup self draining White Recessed Drink Holder perfect drop into with ease to existing Cup hole (3-5/8" dia.); No need to cut large hole for it.

Fit YETI 30 oz. Rambler Tumblers, Travel Mugs, beer bottles and more

Flange 4-1/2", Depth: 4-1/2", require Cut Hole 3-5/8";

SeaLux Marine 7/8" Oval Stainless Steel Tubing Handrails for SeaDoo, Yamaha watercraft and boat

with Welded 1/4" (dia.) x 2"(L) Studs , Come with Black Gasket Pad for seamless sealing and moist control.

7/8" tubing formed into an oval shape for easy gripping

330 lb. load rating per pair when fastened to 2 x 4 studs on 16" centers

Marine Grade Polished stainless steel, outdoor use and salt water environment friendly

Bracket with hinge function in one unit

SeaLux 30 degree flush mount Rod Holders (2 pieces)

Mirror Polish finish on Flange, 3-1/2" x 4-9/16", make sure you select the correct product for your boat

constructed of Stamped 304 Stainless Steel, corrosion resistance

Made of Marine Grade Stainless Steel, for max. corrosion resistance.

Dimensions: 3/4"L X 1-1/4"; 304 Stainless Steel

Use to hang small cargo net/hammock, can diminish small misc. items rattling and rolling while boat/kayak in moving.

SeaLux Marine Boat 6-1/8" x 3" Stainless Steel Oval DUAL Horn Cover Grill for Sea Ray Boat and many more other makes

Made of Marine Grade 304 Stainless Steel, for max duration of harsh environment.

Mirror Polished Finish, Overall Dimensions: 6 1/8" L x 3" W x 1/2" H

Ridged rubber grips at the base of the boat hooks help prevent slippage when in use.

two and three section telescoping boat hooks are made of anodized aluminum tubing, a fiber reinforced nylon hook, and a soft tip to help prevent scratches.

These deluxe telescoping boat hooks feature a twist lock mechanism that helps hold the hook at the desired length.

Suitable for spinning, conventional and fly rods. Rod Rack can be mounted to hold rods horizontally, vertically and overhead.

Fabricated from marine Grade Anodized Aluminum. Soft vinyl insert cushions rod butt. Rotating nylon insert holds tip safely and securely.

Rod Butt is inserted into Closed End of set. Vinyl insert protects the Rod Butt. Tip of rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically or Overhead.

SeaLux 316 Stainless Steel I.d. 2" Round Oarlock

Durable 316 Stainless Steel heavy-gauge cast steel with a mirror polish finish offers long-lasting performance.

Inside diameter of oarlock is 2". Fits most standard size oars. Sold in pairs.

Newly Design with Carbon Fiber Print, added modern sense to your application. Ideal for Sports Speed boat, Entertainment Game Table

Made of 304 Stainless Steel with Carbon Fiber Print, Supreme corrosion resistance design for Boat, Van, install on table, counter top, dashboard, seat around , etc.

Includes drain with hose barb, mounting gasket and internal cushion pad.