Best Seeboo in 2026

【HIGH PERFORMANCE】—The Crank Strength Of The Harmonic Balancer Installation Tool Is 10.9, And It Is Made Of High-Quality 35CrMo Heavy Steel. The Quenching Process Is Modulated To Ensure That It Does Not Affect Long-Term Use. The Surface Is Black And Rust-Proof. There is No Need To Worry About The Wrench Slipping Off During The Installation Process With Customized Flange Nuts!

【COMPATIBLE WITH CHEVROLET GM LS & LT SERIES 】—Harmonic Balancer Installation Tool Suitable For Camaro, Corvette, Trans Am, GTO, G8, LS Truck Or LS Power Road Signs. Compatible With All GM LS And LT Series Engines From 1997 To The Present (Third, Fourth And Fifth Generations). You Can Also Search For Matching Models Through Amazon To Purchase!

【 INSTALLATION AND REMOVAL 】— Can Be Screwed Completely Into The Crank, Just Slowly Twist The Nut Until The Pulley Is In Place. The Upgraded Wrench Plane Is Convenient For Disassembly Without Worry，This Is Required For Engine Replacement Or Balancer Upgrades. A Little Lubricating Oil Will Make It Smoother When Using!

🚙5/16 " IN-LINE FUEL FILTER— Fuel Filter Fits 5/16 "Oil Pipe-5/16" Joint Or Connector At Each End, Transparent Plastic Shell, Orange Inner Filter, With Metal Brass End Caps On The Top And Bottom Of The Filter, Filter Out Impurities And Precipitation In Gasoline, Reduce Parts Wear And Protect The Engine, Direct Installation, Simple And Convenient.

🚙SIZE & APPLICATION—Filter Size: 97mm x 53mm; Diameter Size Of Inlet And Outlet Pipe: 9.3mm. Both Ends Are Connected With 8mm Inner Diameter Fuel Pipe. If The Gas Flows Through The Filter, please Check Through The Design.

🚙BROAD COMPATIBILITY—General Fuel Filters Can Be Used For Tractors, Cars, Trucks, Motorcycles, RVs & Any Gasoline Powered Engines

🚙3/8 " IN-LINE FUEL FILTER— Transparent Plastic Shell, Orange Inner Filter, With Metal Brass End Caps On The Top And Bottom Of The Filter, Filter Out Impurities And Precipitation In Gasoline, Reduce Parts Wear And Protect The Engine, Direct Installation, Simple And Convenient.

🚙SIZE & APPLICATION—Filter Size: 97mm x 53mm; Diameter Size Of Inlet And Outlet Pipe: 9.3mm. Both Ends Are Connected With 8mm Inner Diameter Fuel Pipe. If The Gas Flows Through The Filter, please Check Through The Design.

🚙BROAD COMPATIBILITY—General Fuel Filters Can Be Used For Tractors, Cars, Trucks, Motorcycles, RVs & Any Gasoline Powered Engines

【HIGH PERFORMANCE 】—All Parts Of The Inner Axle Side Seal Installation Tool Are Made Of CNC Machined Heavy Steel, And Are Electroplated With Zinc Black, Which Is Durable And Will Never Rust. High Precision And High Hardness Can Extend The Service Life. Ensure That The Manufacture Of Each Part Meets The Required Specifications.

【BROAD COMPATIBILITY】—The Inner Axle Side Seal Installation Tool Compatible With Dana 30 / Dana 44 / Dana 60 Axle Front Differential .This Tool Can Help You Quickly Complete Repairs, Repairs Or Upgrades Of The Inner Shaft Side Seals.

【UPGRADE DESIGN】—The Inner Axle Side Seal Installation Tool Equipped With A Thrust Bearing Instead Of A Flat Washer Sleeve. The Customized Flange Nut Does Not Need To Worry About The Wrench Falling Off During The Installation Process.Simplify The Process When Install The Axle Seal. Great Time Saver! The Way Safer/Easier To Use Than The Old Punch And Hammer（All Parts Are Upgarded, You Will See, Excellent Value）

This Heavy-Duty Impact Socket is Designed with More Than Three Times the Standard Socket Mass to Direct More Energy to Removing the Bolt.

Can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications.

Made with heat-treated, impact quality alloy steel.

FOR PRESSED-ON HARMONIC BALANCERS: Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt; Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers

WIDE APPLICATION: Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac (1988 - Newer), Chevrolet Trucks (2003 - Newer), Chrysler (1990), Ford (1995 - Newer), and Mitsubishi Eclipse (1995)

EASY TO USE: Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process

ITEM SPECIFICATIONS: Our Harmonic Balancer Puller Set is designed for removing damper pulleys in tight engine compartments without removing the radiator. The set features an enhanced design for optimal position retention, and the steel construction provides extra strength and longevity with a Black Oxide finish for corrosion resistance.

INCLUDES: This high quality set includes a 3-jaw puller, four lengths of forcing rods, a forcing screw with a 3/8-inch square drive for use with a ratchet and a 3/4-inch hex for wrench or socket use. It also includes a high quality storage case so you'll never have to go looking for a tool again!

COMMON APPLICATIONS: This set is compatible with Chrysler, compatible with GM, compatible with Mitsubishi, compatible with Cadillac, and compatible with Oldsmobile cars, SUVs, vans, and pickup trucks.

INCLUDES: This LS Harmonic Balancer Install Kit includes a threaded installer for installing harmonic balancers on select GM engine applications. This kit includes a heavy duty thrust bearing washer and one M16 x 2.0 threaded installer rod.

DESIGN: This harmonic balancer install kit’s contents feature solid steel construction with a black phosphate finish for enhanced strength and durability. The included heavy duty thrust bearing washer makes harmonic balancer installation simple, allowing for harmonic balancer installation on several GM engines.

APPLICATION: This kit services harmonic balancers, underdrive pulleys, and recessed crank threads on GM Gen III/Gen IV (LS-based) and GM Gen V (LT-based) V8 engine systems. This set includes one metric threaded adapters in M16 x 2.0 thread. *NOTE: This kit is for harmonic balancer installation only and will NOT remove harmonic balancers.*

GREAT COMPATIBILITY: OAL 89mm, 1/2" square drive; can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications.

SUPERIOR QUALITY: Made with heat-treated, impact quality-GB 40CR alloy steel which has longevity longer much than other ordinary steel.

PERFECT DESIGN: Provide more energy to removing the bolt for designed with more than 3 times the standard socket mass to direct

Can be used on Chevy, Chrysler, Dodge, Ford, GM, Jeep and Mazda engines that use a 22 mm hex pulley damper bolt or other 22 mm applications

Use with 1/2" drive

Made with heat-treated, impact quality alloy steel

【Application】24mm Harmonic Balancer Socket works for GM LS engines that use a 24 mm hex pulley damper bolt or other 24 mm applications.

【Function】To remove crank bolts is a frustrating thing if the bolt is tightly fastened. You will need this crank bolt socket using an impact wrench to increase torque to help remove the stubborn crank bolt. Use with 1/2" drive.

【Upgraded Design】Our 24mm heavy duty impact socket is designed with 3 Times Momentum Power of Standard Impact Sockets, which helps direct more energy to removing the bolt. Saving time and making the job easier.

Direct replacement - this engine harmonic balancer bolt matches the fit and function of the factory part on specified years, makes and models

Ideal solution - this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

EASY HARMONIC DAMPER REMOVAL: Use the ABN Harmonic Damper Pulley Puller 6-Piece Set for Harmonic Balancer Removal on Chrysler, GM, Mitsubishi Vehicles when you need to remove the harmonic balancer on your vehicle

VARIOUS APPLICATIONS: Compatible with Chrysler, GM, Mitsubishi, Cadillac, and Oldsmobile vehicles; Cars, SUVs, vans, and pickup trucks

BUILT TO LAST: Enhanced design with spring-loaded legs for optimal position retention; All steel construction for extra strength and longevity; Black oxide finish for corrosion resistance

This Harmonic Balancer Puller Set provides you with everything you need to remove damper pulleys in tight engine compartments without removing the radiator.

Designed to ease the operation of pulling the balancer pulley. It reduces damage to both the pulley and the shaft. Clevis pins allow jaws to be quickly removed and installed.

APPLICATIONS: This set is compatible with Chrysler, compatible with GM, compatible with Mitsubishi, compatible with Cadillac, and compatible with Oldsmobile cars, SUVs, vans, and pickup trucks.

Product Type: Auto Part

Package Quantity: 1

Package Weight: 2.5 lbs

Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement

Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components

Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price

Multiple use for removal and installation of harmonic balancers, gear puller, pulley puller

Idea for remove harmonic balancers, crankshaft pulleys, steering wheels and gear pulleys, capable of handling 2 or 3-way bolt pulling applications works on most domestic V8 and V6 engines, pickups, SUVs and small engines with harmonic balancers with tapped holes

Set contains: (1) heavy duty forged three-way puller flange, (2) live-center forcing screws, (4) live-center adapters make a multi-functional remove/install applications easier

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.

GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle

MANY APPLICATIONS: The forcing fasteners in this harmonic balancer puller fit a wide variety of V8 and V6 vehicles; M16 x 2.0 mm (GM), M14 x 1.5 mm (Dodge, Chrysler, and Jeep), M12x 1.75 mm (Dodge Chrysler, and Jeep), and M12 x 1.5 mm (Ford)

SAVE TIME AND MONEY: Car repairs can be expensive; By using this harmonic balancer installer, you will be saving over $600; You can also save time with this balancer installation tool by not waiting for repairs at the auto shop

CONVENIENT PACKAGE: All of the pieces in this harmonic balancer installer kit come in one convenient package, making the pieces both easy to find and easy to store; Never worry about losing pieces with this harmonic balancer puller set

Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement

Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components

Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price

Straightforward Balancer Changes: The specialized low profile design allows you to remove the harmonic balancer without first removing the radiator; Save time and effort with this balancer puller

No Bolts Required: Quickly and easily remove or install harmonic balancers without tapped holes found on many GM vehicles; The clip in design offers a strong grip without bolting into the balancer

Application Specific Fit: An ideal way to remove a harmonic balancer without tapped holes from a GM vehicle; Other general use pullers will be less efficient and ineffective

Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement

Durable construction - stringent specifications and careful construction help ensure longevity

Thoroughly tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing

Direct replacement to ensure proper fit

Ships with protective sleeve over cone and trigger to prevent damage (where applicable)

Ease of installation with Dorman’s Harmonic Balancer Puller (594-999)

[Car Maintenance Made Easy]: When removing harmonic balancers, gear pulleys, steering wheels, and crank shaft pulleys, depend on the ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit

[Even Application]: No need to worry about steering wheel puller harmonic balancer puller kit causing damage to car parts; Yoke allows for 2 and 3-hole application; Harmonic balancer puller allows even pressure to parts

[Built to Last]: Steering wheel puller kit bits are hardened and tempered to ensure longevity and strength; Machine precision flywheel puller tool designed to withstand extended, repeated use

Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement

Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components

Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price

【HIGH PERFORMANCE】—The Crank Strength Of The Harmonic Balancer Installation Tool Is 10.9, And It Is Made Of High-Quality 35CrMo Heavy Steel. The Quenching Process Is Modulated To Ensure That It Does Not Affect Long-Term Use. The Surface Is Black And Rust-Proof. There is No Need To Worry About The Wrench Slipping Off During The Installation Process With Customized Flange Nuts!

【COMPATIBLE WITH CHEVROLET GM LS & LT SERIES 】—Harmonic Balancer Installation Tool Suitable For Camaro, Corvette, Trans Am, GTO, G8, LS Truck Or LS Power Road Signs. Compatible With All GM LS And LT Series Engines From 1997 To The Present (Third, Fourth And Fifth Generations). You Can Also Search For Matching Models Through Amazon To Purchase!

【 INSTALLATION AND REMOVAL 】— Can Be Screwed Completely Into The Crank, Just Slowly Twist The Nut Until The Pulley Is In Place. The Upgraded Wrench Plane Is Convenient For Disassembly Without Worry，This Is Required For Engine Replacement Or Balancer Upgrades. A Little Lubricating Oil Will Make It Smoother When Using!

Practical: Use the ABN Universal Harmonic Balancer Puller & Installer 52-Piece Tool Kit – Master Balancer & Pulley Removal/Installation Set to safely remove harmonic balancers and drive pulleys which are pressed fitted onto the crank shaft without damaging your vehicle

Versatile: Also works on gear pulleys and steering wheels; Bearing-centered circular 2/3-way and an assortment of metric and fractional bolts and adapters provide wide coverage; Fits L98 & LT series engines, GM LS1 with aftermarket 3-bolt style balancer; If your balancer has threaded drilled and tapped holes in the front (to attach supplied pulling bolts to), it is compatible

Specifications: Heavy duty 3/4" diameter forcing screw internally threaded to fit the eight adapters to install harmonic balancers; Adapters M16 x 2.0, M14 x 1.5, M12 x 1.5, 3/4-16, 5/8-18, 9/16-18, 1/2-20, 7/16-20; Black screws M10 x 1.5 x 35mm, M8 x 1.25 x 45mm, M8 x 1.25 x 65mm, M8 x 1.25 x 90mm; Silver screws UNC 3/8” x 2”, UNC 5/16” x 6”, UNC 5/16” x 3-1/2”, UNF 5/16” x 3”, UNF 3/8” x 1-1/2”, UNF 1/4" x 2-1/2”, UNC 3/8” x 3”, UNC 3/8” x 4-1/2”, UNC 3/8” x 2”

Includes: 3/8 in x 24 in, 5/16 in x 18 in, 3/8 in x 16 in, and M8 - 1.25 x 80mm bolts

Floating Swivel Helps Prevent Damage to Shaft Ends

4 Slots in Yolk for 2 or 3 Hole Applications

✅ HARMONIC BALANCER PULLER: Our conventional pulley puller tool removes the harmonic damper pulley found on all Mazda, Dodge engines 1990 and later, GM and Cadillac engines 1988 and later, Ford engines 1995 and later, and some Hyundai and Mitsubishi engines

✅ TIME SAVER: This gear puller tool or flywheel pulley eliminates the need for a technician to go through the time-consuming process of first removing the radiator before being able to remove the pulley

✅ STRONG JAW DESIGN: This harmonic balancer puller jaw design or (tools flywheel puller tool set) provides greater durability, clevis pins allow jaws to be quickly removed and installed, allowing the user to finish the job quickly and effectively

Ease of Use: Harmonic Balancer Installer Kit is made with quality and attention to detail so that you can install a harmonic balancer without causing damage

Harmonic Balancer Installer: Tool set includes a jaw screw, a jack screw nut, a pressure bearing, a 3/8 inch x 24 bolt, and 9 thread adapters

Mechanic Tools: OEMTOOLS harmonic balancer installer includes two sets of color coded adjustable sleeves for each expanding driver