Best Sewtanc in 2026

【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves

【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine.

【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!

【Compatible Models】Compatible with GM LS series Xtreme Duty Flexplate with 4mm thick center plate, suitable for GM automatic transmission with 1998-2004 LS engine using TH350 or TH400 transmission.

【High Quality Material】The aluminum alloy crankshaft adapter has good ductility, electrical conductivity and thermal conductivity, and has strong ferromagnetic properties. Stable characteristics and high reliability. Perfect match with the original car.

【Easy to Install】Crankshaft Adapters allow you to bolt GM automatic transmissions to the engine, or older GM automatic transmissions to LS series engines. Just plug in the rear of the crankshaft. If using a curved flex board, you will need this adapter spacer to give you the correct distance and guide dimensions.

[High-quality material] The shift connecting rod is made of high-quality steel, the surface is electroplated, will not rust, wear-resistant and anti-corrosion

【Compatible models】For TH-200 Transmission,For TH-350 Transmission,For TH-400 Transmission,For TH-700R4 Transmission,For 4L60 Transmission,For 4L60E Transmission,For L80E Transmission

【WHAT'S INCLUDED】Natural finish steel rods and brackets including rod ends and 21" long rods for many aftermarket shift steering columns.

【Material】The push rod length checker is made of steel alloy with black oxide coating, which can be used for years of accurate measurement.

【Function】They are easy to read without expensive calipers. Having the correct pushrod in your engine is a key factor in correct rocker arm geometry and is the best tool for measuring the length of the pushrod

【Measuring Range】Pusher Length Checker Adjustable Range: 6.800" to 7.800"

【Package Contents】LS Stainless Steel Coolant Cross Steel Steam Exhaust Kit with Gasket

【Premium Material】Not only does it work well, but it also looks great. This setup combines CNC aluminum manifolds and corner ports with 304 stainless steel wire. Each kit is handcrafted. The aluminum block is available in black anodized finish.

【Function】Steam/accumulated pressure can cause temperature rise, steam trapped when pressure rises, it can create unsafe tuning conditions, which can lead to pre-explosion, cylinder head failure, lean cylinder leading to piston failure, etc. Our stainless steel steam exhaust system connects the 4 corners of the LS engine to remove trapped steam and send it where it is needed.

Matches OE form, fit, and function

Made of durable rubber or aluminum, depending on the OE part

Designed to withstand harsh road conditions

Genuine, OEM Porter Cable Replacement Part

Porter Cable replacement valves, part number N286039

Compatible with: 1WC94 Type 0, 1WC94 Type 1, 1WC95 Type 0, 1WC95 Type 1, 1WC95 Type 2, 3JR70 Type 1, 3JR71 Type 0, 3JR71 Type 1, 4UP72 Type 1, 4YD76 Type 0, 4YD76 Type 2, 4YD76 Type 3, 4YD76 Type 4, 5Z598C Type 1, 919-15204 Type 2, 919-15212 Type 0, 919-15212 Type 1, 919-15214 Type 0, 919-15214 Type 1, 919-15214 Type 2, 919-15214 Type 4, 919-15214 Type 5, 919-15216 Type 0, 919-15216 Type 2, 919-15216 Type 3, 919-15316 Type 0, 919-15445 TYpe 0, 919-15725 Type 1, 919-15726 Type 0, 919-16345 Type

PREMIUM QUALITY - Our Votex quick drain plugs are MADE IN USA. From the Stainless Steel bar stock material to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer.

MESS FREE | HASSLE FREE – Lets face it, conventional oil changes are a mess and require gathering of needed tools. Our quick drain plug now is a tool free process with the included valve release 12" hose. Quickly drain your warm oil at a rate of a quart in less than one minute. Simply spin the hose on for a mess free release of your old oil directly into your waste container, never coming into contact with the waste oil.

PREMIUM STAINLESS STEEL - The drain plug market has a plethora of options which are constructed of soft metals. These are an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. The plug body, valve, valve spring and cap are of the highest quality standard using stainless that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.

CHANGE YOUR OIL AT HOME IN 10 MINUTES OR LESS WITH NO MESS. The fastest, easiest, and cleanest way to change your oil at home with the ValvoMax Quick Twist Oil Drain Valve. Replaces your drain bolt. Find your vehicle using the Amazon Confirmed Fit search tool. Free returns, no oil leaks guaranteed, lifetime warranty, 100% satisfaction, made in USA, veteran owned.

THE COMPLETE SOLUTION. Includes Quick Twist valve, steel cap with embedded rubber seal, drain tube assembly, and washer for installation. Eliminate the need for extra tools, no stripped or frozen drain plugs, avoid hot oil burns, and drain oil hot. Prevent spills, eliminate injuries, promote sustainability, controlled sampling, lower cost, reduce time, and more!

PREMIUM BUILD. Features rugged Stainless-Steel construction that’s built to last, wave spring technology allows for FAST oil drain, premium VITON O-rings, safety cap with embedded rubber seal. Nothing comes close to the durability offered. Material you can TRUST! Designed with 3 redundancies in mind to eliminate any chance of leak.

Direct replacement - this power steering cooler is designed to match the fit and function of the original cooler on specified vehicles

Ideal solution - this power steering cooler is a reliable replacement for a failed original cooler

Durable construction - made from quality, corrosion-resistant components to ensure reliable performance and long service life

Directly from One of the Biggest Pex Systems Manufacturers

This Efield Product Compatible Pex Tubing

Made of Lead Free Brass

PREMIUM QUALITY - Our Votex quick drain plugs are MADE IN USA. From the Stainless Steel bar stock material to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer.

MESS FREE | HASSLE FREE – Lets face it, conventional oil changes are a mess and require gathering of needed tools. Our quick drain plug now is a tool free process with the included valve release 12" hose. Simply spin the hose on for a mess free release of your old oil directly into your waste container, never coming into contact with the waste oil.

PREMIUM STAINLESS STEEL - The drain plug market has a plethora of options which are constructed of soft metals. These are an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. The plug body, valve, valve spring and cap are of the highest quality standard using stainless that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.

M12-1. 25 Drain valve with LC-10 lever clip included

Larger body with a 60% larger drain, allowing for faster oil changes

One Touch Operation

Package Dimensions: 6 L x 1 H x 4 W (inches)

Package Weight : 0.5 pounds

Country of Origin : China

WING STYLE DRAIN COCK - This 1/4 in. Brass Winged Tank Drain Cock is the perfect replacement for damaged or leaking drain cocks for pressure vessels on air compressors or air tanks. Winged style for easy moisture drainage from tanks. The handle is made of steel plated zinc and the most twist force is 12 LBS.

TWIST STYLE PETCOCK - This 1/4” NPT Drain Cock is designed from air compressor tanks to add to compressor longevity. Also known as a petcock. This is o-ring sealed for easy use, features a knurled twist grip. It is crafted with brass to help ensure strength.

SAFETY VALVE - Safety valves are ideal for protecting pneumatic systems and equipment from over-pressurization. This essential safety device activates when pressure in an air compressor tank exceeds a pre-set level, releasing the excessive pressure and keeping the tank from rupturing. The body is made of brass while the spring and pull ring are made of stainless steel. The max pressure is 140 PSI and the air flow is 55 SCFM.

[Material]: Heavy-duty brass,strong and durable,with corrosion resistance,high temperature ductility and low permeability

[Features]: Both ends of this joint have 45-degree flare connection,which has multiple functions and is convenient for installation and disassembly.It is easier to connect and disconnect the two pipes than a coupling

[Package includes]: 2 PCS 3/8" Male Flare x 3/8" Male Flare + 1 PC Teflon Tape

CHANGE YOUR OIL AT HOME IN 10 MINUTES OR LESS WITH NO MESS. The fastest, easiest, and cleanest way to change your oil at home with the ValvoMax Quick Twist Oil Drain Valve. Replaces your drain bolt. Find your vehicle using the Amazon Confirmed Fit search tool. Free returns, no oil leaks guaranteed, lifetime warranty, 100% satisfaction, made in USA, veteran owned.

THE COMPLETE SOLUTION. Includes Quick Twist valve, steel cap with embedded rubber seal, drain tube assembly, and washer for installation. Eliminate the need for extra tools, no stripped or frozen drain plugs, avoid hot oil burns, and drain oil hot. Prevent spills, eliminate injuries, promote sustainability, controlled sampling, lower cost, reduce time, and more!

PREMIUM BUILD. Features rugged Stainless-Steel construction that’s built to last, wave spring technology allows for FAST oil drain, premium VITON O-rings, safety cap with embedded rubber seal. Nothing comes close to the durability offered. Material you can TRUST! Designed with 3 redundancies in mind to eliminate any chance of leak.

1pc NEW - Design makes changing your oil a breeze and dreading it a thing of the past. Replacing that OEM Plastic Yellow Drain Plug before it fails. Fits all Vehicles with the Faulty OEM Plastic Yellow Drain Plug - KX6E 6730-AB, KX6Z 6730-A, KX6Z6730-B, FT4Z6730-A, (2022 UPDATE) to NEW Thicker Double O-ring Design Compatible with all Lincoln and other Vehicles with Sloppy Drain Plugs - Guaranteed not to LEAK!

SIMPLE - No tools or modifications required for the easiest installation in seconds. This UPR drain plug is intended to replace all the Faulty OEM Plastic Yellow Drain Plugs.

CLEAN - New built in valve allows you to drain your oil in a controlled manner. No more mess from abrupt oil splashes or oil runoff down your frame or skid plate.

Replace your oil drain plug with the EZ OIL DRAIN VALVE for FAST, CLEAN, and “EZ” Oil Changes!

EASY INSTALLATION & EASY OPERATION

SAVE TIME & EXPENSES

Drain water thoroughly: our ball type drain valve can replace air compressor drain cocks, suitable for compressed air storage tanks to drain water or harmful liquids; It can drain water or other harmful liquids thoroughly, which can ensure gas quality and prevent corrosion of pneumatic tools and piping components

1/4 Inch female and male NPT threads: this compressor valve has type-1/4 inch standard connections, female and male NPT threads for connecting male threaded pipe fittings to female threaded pipe fittings, please check the thread information carefully before buying

Extensive usage: air compressor valve has a wide range of application including air, gas, liquid, steam, air compressor, air tank, water tank, air bottle and more, can drain water or other harmful liquids, gas thoroughly to ensure gas quality and avoid corrosion of pipes

SPICAL FEATURE: Tee with three openings for connecting and branching three pipes

FUNCTION: Female National Pipe Taper (NPT) threads for connecting to male threaded pipes,NPT thread size does not actual diameter, it is only nominal pipe size.

METAL: Forge brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Replace your oil drain plug with the EZ OIL DRAIN VALVE for FAST, CLEAN, and “EZ” Oil Changes!

Thread size 18mm-1.5

EASY INSTALLATION & EASY OPERATION

SPICAL FEATURE: Brass Pipe Fittings Kit to meet your daily needs, with multiple types for random use

FUNCTION: Female and male National Pipe Taper (NPT) threads for connecting to female and male threaded pipes,NPT thread size does not actual diameter, it is only nominal pipe size.

METAL: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Replace your oil drain plug with the EZ OIL DRAIN VALVE for FAST, CLEAN, and “EZ” Oil Changes!

EASY INSTALLATION & EASY OPERATION

SAVE TIME & EXPENSES

【Product Features】3/4 inch IPS isolation tankless water heater service valve kit includes hot and cold isolation valves(600 WOG) and pressure relief valve (150 psi/200K BTU). Colored valve handles for easy identification and use of hot and cold valves. Integrated drain valve with brass safety cap providing easy maintenance. Full port ball valve for better flow rate.

【Widely Use】: The 3/4 inch size tankless kit is suitable for most American residential use, including domestic and commercial tankless gas water heater brands such as Rheem,Rinai, Ecosmart,Navien,Noritz,Takagi,Bosch and so on.

【LEAD FREE Certification】: The components are certified lead free. Meets all federal & state standards for lead levels in drinking water system components. You can also find the CSA certification on the pressure relief valve to prove its authenticity.

NEW Genuine Pierburg Turbocharger Bypass / Cutoff Valve.

Pierburg Part Number: 7.01830.13.0

OE Part Number: 06H 145 710 D

Replace your oil drain plug with the EZ OIL DRAIN VALVE for FAST, CLEAN, and “EZ” Oil Changes!

EASY INSTALLATION & EASY OPERATION

SAVE TIME & EXPENSES

Package Dimensions: 3.175 cms (L) x 10.16 cms (W) x 13.462 cms (H)

Product Type: Auto Part

Package Quantity: 1

Replace your oil drain plug with the EZ OIL DRAIN VALVE for FAST, CLEAN, and “EZ” Oil Changes!

EASY INSTALLATION & EASY OPERATION

SAVE TIME & EXPENSES

Package Dimensions: 1.524 H x 9.906 L x 7.111 W (centimeters)

Package Weight: 0.022 pounds

Country of Origin : China