Best Sfc Tools in 2026

Excellent for cutting solder in even 2.5 mm pieces

Works well for both sheet and wire solders, featuring a hole in the side for cutting solder wire

Excellent for preventing your solder from flying away.

Simple and easy to use, the snap back watch case opener opens watch case backs with a snap

Has a broad working area and four sturdy legs with rubber tips keep this tool securely in place as you work

The case opener blade is made of hardened steel and measures 11 mm across the blade

Perfect for holding rings and other small items while you file, polish, or do other work on them.

It has one round side and one flat side, both with leather-lined jaws.

The wooden wedge can be driven into either end, after the ring is place in the jaws, to tighten the clamp and hold it securely.

Includes: Ring mandrel in standard 1-15 size

Two wooden bench pins

Round bracelet mandrel

This premium tube cutting jig is used to hold tubing or rods up to 1/8" diameter

Make perfectly straight cuts with ease

Offers both 90 degree and 45 degree angle slots for cutting

Includes: Ring mandrel in standard 1-15 size

Two slotted wooden bench pins

Flat metal bench block

This dapping punch and block set is ideal for doming soft metals

This 40 piece set includes 36 different sizes of dapping punch, a cube shaped dapping block with large sizes, a flat dapping block with small and medium sizes, a flat forming block with U-shaped grooves, and a swage block with U-shaped, V-shaped, and flat wire grooves

The wood base plate has slots for each piece, and is etched with millimeter sizes and numbers for the dapping punches

7 inch annealing Pan with 1.5 lb pumice stone

The 360 degree rotating base allows you access to your work from almost any angle

The pumice is heat reflecting and the small pieces allow easy positioning of work while soldering

This tube cutting jig will help you make straight perpendicular cuts in wire, tube, and round stock.

It holds and cuts pieces up to 3/8" (9.0 mm) in diameter.

It can help cut uniform pieces from 3/32" (2.4mm) to 3.125" (79.4mm) in length.

The set has an assortment of seven 4 inch long (100 mm) tapered steel mandrels in 7 shapes

Can be used for making jump rings and other findings,wire work,fabricating bezels, PMC, and wax patterns among other things.

Made from steel

This economy engraving block is ideal for the beginning or hobbyist engraver or stone setter.

The set includes a variety of attachments to be used for holding your piece while you work.

The jaws of this engraving block are integrated into the unit and do not lift off of the block.

Great for forming and shaping oval bracelets or solid bangles

This wood bracelet mandrel is stepped in 4 diameters,ranging from approximately 2-3/4", 2-1/2", 2-1/4" and 2"

It is made from one solid piece of hardwood, and has no tang

Good for using with disc cutters, dapping sets, center punches, and other large striking tools.

Brass head ensures a strong dead-weight strike that will not bounce or slide.

Brass also ensures that your striking tools will not get malformed.

The Adjustable Hand Vise has a rotating hardwood wood handle.

The jaws are approximately 15mm (0.590 inch) wide and 6mm (0.23) thick.

Jaws open to a maximum of 6mm (0.23)

Works as a clamp to hold small items like jump rings, earwires, and stone settings while soldering, filing, or doing other detail work.

Handles are coated in pvc, making for a comfortable grip with great leverage, and also a heat barrier if using them to solder.

Stainless steel with straight tips and have a polished surface and a box joint.

This tap and die set is useful for threading small parts that need to screw together

Contains 14 different sizes from .1 mm to 2 mm. Die plate measures 3 1/4"

Taps measure about 1 1/4" and have 2 mm shanks

Excellent tool to form bezels, make chain links, wrap wire, form and shape wire.

Made of hardened tool steel with a smooth finish and has an even taper.

Dimensions: Overall Length: 11", Working Length: 7.5".

Use these 13 tools to make a variety of wrapped wire jewelry.

Kit includes:

Rawhide Mallet, Steel Ruler, Pin Vise, Steel Scribe,

Includes: One ring mandrel in standard 1-15 size

Two different style wooden bench pins

One bezel mandrel adapter

Kit Includes: Soldering Beyond the Basics book, SFC Tools Mighty Torch,

Three Pack of Solder Paste ¼ oz each of Easy Medium and Hard,

Soldering Block – Honeycomb, Soldering Block – Asbestos Free,

Good for using with disc cutters, dapping sets, center punches, and other large striking tools.

Brass head ensures a strong dead-weight strike that will not bounce or slide.

Brass also ensures that your striking tools will not get malformed.

6" Triangle file

Double cut. 11.25 mm width - corner to corner. 8.25 mm width at the tapered end. Cut smooth

Runs on butane, is refillable, has automatic ignition, and is portable and lightweight.

Can be used for soldering jewelry metals, firing PMC clay, and enameling.

It has a 2500?F flame and up to 60 minutes of continuous burn time.

Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire

21-degree

2.5mm heat-treated carbon steel construction provides durability and long life

Capable of grasping and holding wire less than 1 mil thick with the strength for wire forming

Project type: Wire Harness Manufacturing, Telecommunications, Jewelry Manufacturing,Electronics, Electrical

Patented, non-protruding, Light Touch return spring help ensure operator comfort.

RIGHT TOOL FOR THE RIGHT JOB: This bail making plier creates 6 different loops: 2mm, 3mm, 4mm, 5mm, 7mm & 9mm. Bend, shape, and loop metal wire to create custom jewelry and accessories.

PROFESSIONAL QUALITY: European design and made using the highest standards, this looping plier measures 5.5 inches (140mm) and features a polished steel head and lap joint construction.

ULTIMATE COMFORT: These plier handles were created specifically for comfortable daily use. Made for heavy duty work and to stand up to years of application, while the double-leaf springs help ease hand fatigue while crafting.

Made in USA

Includes an ergonomic design, non-slip Xuro-Rubber grips

Lifetime warranty

HEAVY-DUTY: This tool works with various types of wire, allowing you to create beautiful jewelry.

EYE PIN TOOL: These wire-shaping pliers make it easy to craft eye pins, bend metal, and trim wire.

CRAFT & JEWEL ACCESSORY: These pliers are great for jewelry kits for professional or hobby crafters.

COMBO PACK: This trio of 5-inch looping pliers gives you various options of loop sizes. Choose from 1.5mm, 2.25mm, and 3mm. They are ideal for hobby crafters and make a terrific addition to jewelry making kits.

EYE PIN TOOL: These wire-shaping pliers make it easy to craft eye pins, bend metal, and trim wire all in one motion! Customize the length of eye pins and create your own findings with these 1-step tools.

JEWELERS TOOL: Whether a beginner or professional, these easy-to-use looping pliers instantly create perfect loops in one easy step! Idea for making rosaries, earrings, bracelets, necklaces, and other wire jewelry.

HEAVY-DUTY: This tool works with various types of wire, allowing you to create beautiful jewelry.

EYE PIN TOOL: These wire-shaping pliers make it easy to craft eye pins, bend metal, and trim wire.

CRAFT & JEWEL ACCESSORY: These pliers are great for jewelry kits for professional or hobby crafters.