Best Sherco-Auto in 2026

High Temperature Crimp Wire Terminals Are Designed For Use In Applications With Environments In Which Standard Connectors Could Melt. Made With Nickel-Plated Steel And Rated For 482°C (900°F), These Terminals Are Ideal For Motors, Ovens, Or Other Extreme Temperature Applications. Hi-Temp Terminals Are Designed To Connect A Single Wire To A Screw Or Stud Type Electrical Connection.

Temperature Rating: 482°C (900°F) continuous, 649°C (1200°F) intermittent.

High Temperature Crimp Electrical Wire Terminals Available In 22-18, 16-14, And 12-10 Awg Gauge Ring, Fork Spade, Male & Female Disconnects & Butt Splice Connectors.

10 Piece Heat Shrink Insulated 8 Gauge Female Spade Quick Disconnect .250 Stud

Type: Female Quick Discconect / Push-on / Spade - Gauge Size: 8 AWG - Tab Size: .250 (1/4")

Our heat shrink connectors provide durable long lasting electrical connections.

Sun Easts 2" Water Temperature Mechanical Single Gauge Kit Comes with 72" of Tubing with Bracket, Light and 1/2" NPT Fitting

130-280°F - 54-139°C

2" Diameter

Our Mechanical Oil Pressure Gauge 72" Inch Nylon Line Tubing Install Kit w/ Fittings is made of High Quality Materials for proper installation.

Nylon line is 1/8 and 72" (6' FT) long.

For mechanical pressure gauges (except fuel, nitrous, or brake pressure gauges).

Universal Push Pull 3 Position Headlight Switch

12 Volt

Replaces Standard DS135

Package of 2 Universal / General Use Fusible Link Wires

Wire Size: 14 Gauge

Wire Length: 8" Inch

Our 16 Piece Master Fusible Link Wire Assortment comes with 2 Each of 8 Different Types.

Includes 18, 16, 14 AWG Pigtails and 5/16", 1/4" & 3/8" Ring Studs for Ford, GM & Universal.

Comes inside of a 8 Compartment Clear Plastic Case for easy storage.

Shows Oil Pressure (P.S.I) from 0 - 80

2" Diameter

Chrome

【PREMIUM QUALITY】: Thick copper barrel ensures strong secure crimping every time, providing minimal voltage drop, high current flow, and less heat. These will prevent short circuits and problematic wiring that inferior connectors are known for

【DURABILITY】: Each butt, ring and fork terminal features a thick tinned copper barrel that resists corrosion to hold the wire tight when crimped. The barrel is created from one piece of copper that eliminates the problem of the barrel opening. Your wire will never slip out of the connector

【WATERPROOF】: Insulation tubing has unique dual-walled design. High quality 3:1 shrinkage tubing has a heat-activated sealant lining to provide a 360-degree secure seal. It's flame-retardant, waterproof, and can be used underground

♥ PREMIUM SOLDER SEAL RING: Tubing reduces in size, the enough solder will melt and flow through the stripped wires, ensure a long lasting connection for your application.

♥ BETTER WATERPROOF SOLUTIONS: Double wall design, Hot Melt Adhesive inside ensures wires strongly connected and prevent wires slipping from the terminal; Polyolefin outside tubing provides insulation and improves pullout strength.

♥ ABRASION RESISTANCE HEAT SHRINKABLE TUBE: Premium tube materials are specially designed to be used in harsh environments. Protect the wires and cables from abrasion, cutting, scuffing and low impact situations.

【High Success Rate】Upgraded to use exclusive material in the butt connectors to avoid shrink tubing melting before solder ring. The success rate of connecting wire has been greatly improved.

【Better Waterproof and Seal Performance】With IP67 water-resistant rating, after being heated, they shrink and water will not be able to go inside, preventing any short circuit issues. Widely used on marine projects.

【Time Saver and Simple Process】Solderless, crimpless, one-step solder and seal process for all your connections, much faster and easier than the old way.

♥ PREMIUM SOLDER SEAL RING: Tubing reduces in size, the enough solder will melt and flow through the stripped wires, ensure a long lasting connection for your application.

♥ BETTER WATERPROOF SOLUTIONS: Double wall design, Hot Melt Adhesive inside ensures wires strongly connected and prevent wires slipping from the terminal; Polyolefin outside tubing provides insulation and improves pullout strength.

♥ ABRASION RESISTANCE HEAT SHRINKABLE TUBE: Premium tube materials are specially designed to be used in harsh environments. Protect the wires and cables from abrasion, cutting, scuffing and low impact situations.

Haisstronica solder seal wire connectors hot melt adhesive systems provide the right amount of adhesive,which cools,hardens,and reaches its bond strength within seconds,ensuring a weatherproof and long-lasting bond for your application.

With enough solder wrapping the wire to melt and flow,marine grade wire connectors forming a seal,which ensures long-lasting connections,especially for larger one.

With its EVA materials,the heat-shrink tube of solder seal wire connectors provide clear visibility of the soldering penetration and premium abrasion resistance for long-term reliability.

The Waterproof wire connectors are made of superior hot melt adhesive material,which will melt the rich adhesives and wrap the solder wire connectors to apply in marine.

Firm connection:High purity thick solder rings are an important part of our solder seal wire connectors,which forms rock-solid connections by the molten solder flowing and adhering completely after heating.

With its EVA materials,the heat-shrink tube of solder seal wire connectors provide clear visibility of the soldering penetration and premium abrasion resistance for long-term reliability.

✔️ EASY AND FAST PROCESS: All-in-one step solder and seal process. No need for crimp tools and soldering machine. Timer and mess saver

✔️ WATERPROOF AND INSULATION: Dual-walled design - Outside Polyolefin tubing provides insulation and improves pullout strength; Hot Melt Adhesive & Solder inside ensures wires tightly connected and avoids wires slipping out of the terminal

✔️ STAY ORGANIZED: Our connectors come within a storage box, easy to store and carry. Color-coded tubing makes it easy to identify the right size of the connector for every application. The connector assortment includes white (AWG 26 – 24), red (AWG 22 – 18), blue (AWG 16 – 14) and yellow (AWG 12 – 10) solder seal connectors that can be used on wire AWG from 26 to 10.

✔️ EASY AND FAST PROCESS: All-in-one step solder and seal process. No need for crimp tools and soldering machine. Timer and mess saver

✔️ WATERPROOF AND INSULATION: Dual-walled design - Outside Polyolefin tubing provides insulation and improves pullout strength; Hot Melt Adhesive & Solder inside ensures wires tightly connected and avoids wires slipping out of the terminal

✔️ STAY ORGANIZED: Our connectors come within a storage box, easy to store and carry. Color-coded tubing makes it easy to identify the right size of the connector for every application. The connector assortment includes white (AWG 26 – 24), red (AWG 22 – 18), blue (AWG 16 – 14) and yellow (AWG 12 – 10) solder seal connectors that can be used on wire AWG from 26 to 10.

✔️ EASY AND FAST PROCESS: All-in-one step solder and seal process. No need for crimp tools and soldering machine. Timer and mess saver

✔️ WATERPROOF AND INSULATION: Dual-walled design - Outside Polyolefin tubing provides insulation and improves pullout strength; Hot Melt Adhesive & Solder inside ensures wires tightly connected and avoids wires slipping out of the terminal

✔️ STAY ORGANIZED: Our connectors come within a storage box, easy to store and carry. Color-coded tubing makes it easy to identify the right size of the connector for every application. The connector assortment includes white (AWG 26 – 24), red (AWG 22 – 18), blue (AWG 16 – 14) and yellow (AWG 12 – 10) solder seal connectors that can be used on wire AWG from 26 to 10.

✔ HIGH QUAILTY COPPER CORE: Core Heat shrink butt connectors use the copper core with high thickness, which is up to 0. 8mm. Make connection project safer! High thickness copper core calls the attention of buyers!

✔HIGH QUALITY HEAT SHRINK: Translucent heat shrink tubing provides high tensile strength and resistance to stretch and mechanical damage. Thick barrel ensures strong crimp every time. The inner wall of heat-shrinkable tube has enough hot melt adhesive to ensure waterproof performance. Your wire will never slip out of these heat shrink butt connectors.

APPLICATION AREAS-Application in areas such as automotive, watercraft, electrical and electronics industries, with 3 different sizes, So that repair work is much easier

GOOD QUALITY MARINE GRADE WIRE TERMINATION:The Haisstronica heat shrink connectors kit includes ring,fork, spade,and heat shrink butt connectors.The right quality wire connectors,for the right job,is always worth expense.

99.9% PURE COPPER TINNED:Effectively prevent copper layer rust and then cause bad contact,anti oxidation prevent electrical sparks.Strong conductive.

EXTREMELY RELIABLE CRIMPING:The 3:1 heat shrink connector with adhesive lined will exude hot melt adhesive after being evenly heate,quickly shrink and adhesion to the insulation of the wire.Create a complete environmental seal.Waterproof,Wear-resistant.

HIGH QUALITY-Shrinking ratio: 3:1.Translucent heat shrink tubing provides high tensile strength and resistance to stretch and mechanical damage. Thick barrel ensures strong crimp every time. Your wire will never slip out of these heat shrink butt connectors.

DURABILITY-Dual-walled design, polyolefin tubing in outside and hot melt adhesive in inside. The thicker and better copper of the heat shrink butt connectors provides increased current flow andensures less voltage drop, preventing wiring failures and reducing equipment downtime.

PACKAGE INCLUDED: 200 pcs blue Heat Shrink Butt Connectors.A.W.G: 16-14, Wire range: 1.5-2.5mm²

✔️【PREMIUM QUALITY】Copper barrel ensures strong secure crimping every time, providing minimal voltage drop, high current flow, and less heat. These will prevent short circuits and problematic wiring that inferior connectors are known for

✔️【DURABILITY】Each butt terminal features a tinned copper barrel that resists corrosion to hold the wire tight when crimped. The barrel is created from one seamless piece of copper that eliminates the problem of the barrel opening. Your wire will never slip out of the connector

✔️【WATERPROOF】Insulation tubing has unique dual-walled design. High quality 3:1 shrinkage tubing has a heat-activated sealant lining to provide a 360 degree secure seal. It's flame-retardant, waterproof, and can be used underground

HIGH QUALITY-Shrinking ratio: 3:1.Translucent heat shrink tubing provides high tensile strength and resistance to stretch and mechanical damage. Thick barrel ensures strong crimp every time. Your wire will never slip out of these heat shrink butt connectors.

DURABILITY-Dual-walled design, polyolefin tubing in outside and hot melt adhesive in inside. The thicker and better copper of the heat shrink butt connectors provides increased current flow andensures less voltage drop, preventing wiring failures and reducing equipment downtime.

PACKAGE INCLUDED: 120 pcs Yellow Heat Shrink Butt Connectors.A.W.G: 12-10, Wire range: 4.0-6.0mm².

✔ HIGH QUAILTY COPPER CORE: Core Heat shrink butt connectors use the copper core with high thickness, which is up to 0. 7mm. Make connection project safer! High thickness copper core calls the attention of buyers!

✔HIGH QUALITY HEAT SHRINK: Translucent heat shrink tubing provides high tensile strength and resistance to stretch and mechanical damage. Thick barrel ensures strong crimp every time. The inner wall of heat-shrinkable tube has enough hot melt adhesive to ensure waterproof performance. Your wire will never slip out of these heat shrink butt connectors.

APPLICATION AREAS-Application in areas such as automotive, watercraft, electrical and electronics industries, with 3 different sizes, So that repair work is much easier

✔ HIGH QUAILTY COPPER CORE:Core Heat shrink butt connectors use the copper core with high thickness,which is up to 1mm.Make connection project safer!High thickness copper core calls the attention of buyers!

✔HIGH QUALITY HEAT SHRINK:Translucent heat shrink tubing provides high tensile strength and resistance to stretch and mechanical damage.Thick barrel ensures strong crimp every time. The inner wall of heat-shrinkable tube has enough hot melt adhesive to ensure waterproof performance.Your wire will never slip out of these heat shrink butt connectors.

APPLICATION AREAS:Application in areas such as automotive, watercraft,electrical and electronics industries, with 3 different sizes, So that repair work is much easier.

Good Material: Made of T2 copper tubular, electro-Tin Plated for Corrosion Resistance

Features: Electrical splicing non-insulated butt splice connectors are built with a wire stop barrier on center, ensures the effect of compression

Performance good: Easy to connect with electrical wire and strengthen its reliability and safety

HIGH QUALITY-Shrinking ratio: 3:1.Translucent heat shrink tubing provides high tensile strength and resistance to stretch and mechanical damage. Thick barrel ensures strong crimp every time. Your wire will never slip out of these heat shrink butt connectors.

DURABILITY-Dual-walled design, polyolefin tubing in outside and hot melt adhesive in inside. The thicker and better copper of the heat shrink butt connectors provides increased current flow andensures less voltage drop, preventing wiring failures and reducing equipment downtime.

PACKAGE INCLUDED: 200 pcs Red Heat Shrink Butt Connectors.A.W.G:22-18, Wire range: 0.5-1.0mm².

EASY TO IDENTIFY- Easier to choose the correct heat shrink connector, different color coded tubing with wire gauge imprint provides easy identification.

WATERPROOF- Polyolefin tubing on the outside and hot melt adhesive inside provides excellent waterproof property. Polyolefin tubing reduces in size and adhesive flows inside the insulation when heating.

HIGH QUALITY- Thick barrel ensures strong secure crimping every time to prevent wire failure, increase current flow, decrease voltage drop, and reduce equipment downtime. Your wire will never slip out of the connector.

COMPLIANT WITH ALL RELEVANT STANDARDS:With Haisstronica 330PCS( A.W.G.:22-16 150PCS,16-14 100PCS,12-10 32PCS,26-14 48PCS) heat shrink waterproof wire connectors are compliant with ROHS, ISO 9001:2008, SGS, and CE standards.

HIGH-QUALITY COPPER CORE:Heat shrink butt connectors use a copper core with a higher thickness rating.This makes your connection project safer and better meets our customers’ quality needs!

HIGH-QUALITY HEAT SHRINK:Translucent heat shrink tubing provides high tensile strength and resistance to stretch and minimize mechanical damage.The thick barrel ensures a strong crimp every time.The inner wall of the heat-shrinkable tube has enough hot melt adhesive to ensure waterproof performance reliability.Your wire will never slip out of these heat shrink wire connectors.

Usage: The insulated butt splice connectors are great for automotive use, Home applications, or occasional project

Material: Butt connectors are made by high-quality Brass and PVC, and finished by tin-plated

Gauge: 85pcs 22-16AWG(Red crimp connectors), 75pcs 16-14AWG(Blue crimp connectors), 40pcs 12-10AWG(Yellow crimp connectors)

WIREFY MOST VERSATILE CONNECTOR KIT - Ring, fork, hook, spade and butt splice heat shrink wire connectors are included in this multipurpose electrical connector kit. You will not run out of heat shrink wire connectors when working on your next wiring project.

DURABILITY AND WEATHER RESISTANCE - Thick copper barrel ensures a strong wire crimp every time. Your wire will never slip out of these connectors. Adhesive lined heat shrink tubing provides high tensile strength, as well as resistance to weather, stretch and mechanical damage. Prevent wire corrosion in your electrical connections.

EASE OF APPLICATION - Strip wire insulation, crimp terminal barrel with a wire crimper, and apply heat with a heat gun while rotating a connector. Heat shrink tubing will reduce in size and adhere to the wire. No soldering kit needed. Start making secure and durable connections in seconds.