Best Shurflo in 2026

SHURFLO CLASSIC SERIES STRAINER - Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump

Screws directly onto the pump head

Transparent design shows when it is time to clean the bowl

Created with a unique one-piece diaphragm and internal by-pass, this pump is durable and reliable for all plumbing systems. Designed as the next legendary pump to exceed the expectations of our customers, the Revolution Pump is constructed for high flow demand, low noise, and no rapid cycling.

The 4008 Revolution fresh water automatic demand pump is super quiet, thermally protected, and can run dry without damage. With this quality assurance, you can relax in your RV without needing to worry about your water pump.

With the built-in check valve, backflow is prevented so that you can make sure you’re getting all of the water you want to the fixture you’re using. While the pump runs at about 55 PSI, the pressure at which the pump will shut off is 45 PSI.

Reduces pump cycling

Smooths water faucet pulses

Pre-pressurized to 30 PSI with built-in diaphragm

Wingnut Swivel, Nylon: Pump head fittings included with each pump

Item Package Weight: 0.023 kilograms

Package Dimension : 1.016 cms L x 5.08 cms W x 16.764 cms H

Volts 12

PSI 55

Gallons Per Minute 3

Product 1: 4 GPM, 55 PSI, 10 Amps

Product 1: Smooth, high-powered flow

Product 1: Reduced cycling with flow reaction technology

12V - 60 PSI Max Demand Pump

Corrosion-resistant Viton valves and Santoprene diaphragm

Approved for use with Roundup agricultural herbicide

Wingnut Swivel, Nylon: Pump head fittings included with each pump

1/2 inch x 14 Male Pipe Thread (F) x 1/2 inch Barb, Elbow Fitting

Elbow Fitting

SHURFLO's New Revolution Fresh water pump design was created with a unique one-piece diaphragm and internal by-pass, assuring long life and top performance in all plumbing systems

Designed as the next legendary pump to exceed the expectations of our customers, the Revolution pump is constructed for high flow demand, low noise and no rapid cycling

SHURFLO's quality reputation has been built on the reliability and dependability of every pump we build

SHURFLO WALL MOUNT PRESSURE REGULATOR Quick, permanent wall mount

Continuous protection from high pressure surges

Fits standard hose fittings

Model 15-085-00

SHURFLO CLASSIC SERIES STRAINER - Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump

Screws directly onto the pump head

50-mesh SS screen

Easy to install to pump head

Clear, clean plastic construction makes it easy to see when cleaning is needed. Easy Disassembly for cleaning

package height : 2.0 cm

package length : 9.0 cm

package width : 6.5 cm

Shur Flo panels fit directly into the gutter, not under the roof shingles. Will not void any roof warranties. 25-Year Manufacturer's Warranty.

Choose from three different designs: Shur Flo Flat, Shur Flo X for increased ventilation, and Shur Flo Step-Down for gutters installed with Speed-Screw or Quick-Screws hangers.

Virtually invisible from the ground. Available in mill finish, black, and white for 5” and 6” K-Style gutters.

Shur Flo panels fit directly into the gutter, not under the roof shingles. Will not void any roof warranties. 25-Year Manufacturer's Warranty.

Choose from three different designs: Shur Flo Flat, Shur Flo X for increased ventilation, and Shur Flo Step-Down for gutters installed with Speed-Screw or Quick-Screws hangers.

Virtually invisible from the ground. Available in mill finish, black, and white for 5” and 6” K-Style gutters.

Shur Flo panels fit directly into the gutter, not under the roof shingles. Will not void any roof warranties. 25-Year Manufacturer's Warranty.

Choose from three different designs: Shur Flo Flat, Shur Flo X for increased ventilation, and Shur Flo Step-Down for gutters installed with Speed-Screw or Quick-Screws hangers.

Virtually invisible from the ground. Available in mill finish, black, and white for 5” and 6” K-Style gutters.

Max. Flow: 1.8 gpm ; Max. Pressure: 50 psi ; Max. Draw: 6.4 amps ; Max. Fluid Temp: 170° F

3/8" female NPT inlet and outlet

12V DC voltage

New

2PCS Stainless Steel Kitchen Sink Strainer.

Stainless steel construction for reliable, rust-free service. Suited to daily utilitarian use for long-lasting protection against clogging.

Micro-perforation: 2mm dia holes. Efficient anti-clogging shield lets liquid flow seamlessly into the drain while it blocks food particles.

3 fine mesh strainers set of the sizes: 3 3/8", 5 1/2", and 7 7/8" strainer. Get these ultimate wire sift sieves to complete your Home and Kitchen Essentials collection

High-Quality stainless-steel fine wire that will not rust or corrode. Easy cleaning. Dishwasher safe and can handle boiling liquids when straining pasta or hot vegetables

Black insulate non-slip handles let you easily strain hot liquids and foods without burning your hand or fingers. The handles are ergonomic and feel comfortable even for long periods of use

SHARKBITE BRASS PUSH FEMALE ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an MNPT thread quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Pushfit female connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push female adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

SHARKBITE BRASS PUSH CAP: This push-to-connect fitting allows you to plug the end of a pipe quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Pushfit end caps work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite Plug End Caps allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

SHARKBITE BRASS PUSH FEMALE ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an MNPT thread quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Pushfit female connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push female adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

SHARKBITE BRASS PUSH CAP: This push-to-connect fitting allows you to plug the end of a pipe quickly and easily; ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**

VERSATILE: Pushfit end caps work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite Plug End Caps allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

SHARKBITE BRASS CRIMP ELBOW: This SharkBite brass crimp elbow coupling is a full-flow fitting that is used to make a 90-degree connection between two pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp elbows work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These 90-degree elbow connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

SHARKBITE BRASS CRIMP TEE: This SharkBite brass crimp tee coupling is a full-flow fitting that is used to make a connection between two PEX pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp tees work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These crimp tee connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

Female thread and male thread with 90 degree for connecting pipe; hard connect way so it does not need sealing for most situation;

Meet NPTF requirement of US, better than NPT thread, could be used as NPT thread, too;

Good raw material brass, high corrosion resistance, low magnetic characteristics and high temperature ductility;

PIPE CONNECTOR: Brass pipe connectors are perfect for making easy connections between same-size pipe; ideal for use in tight spaces **Large diameter fittings (1-1/4 to 2 inches) require a Stiffener (sold separately) when connecting to PEX pipe**

VERSATILE: SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground)

EASY TO INSTALL: Straight coupling can be easily installed without the need for soldering, glue, or additional tools; can be installed in wet lines

SHARKBITE BRASS CRIMP ELBOW: This SharkBite brass crimp elbow coupling is a full-flow fitting that is used to make a 90-degree connection between two pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp elbows work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These 90-degree elbow connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up