Best Smallrig in 2026

【ORIGINAL DESIGN】SMALLRIG Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K includes an integrated full cage, a top handle, and an SSD holder. The basic handheld kit for Blackmagic Camera from SmallRig provides an ideal production tool for the BMPCC 4K & 6K

【MOUNTING POINTS】SMALLRIG 2419 features multiple mounting points including NATO Rail, 1/4"-20 & 3/8"-16 Holes, Locating Holes for ARRI, and Cold Shoe Mount. The cage rig for BMPCC 4K & 6K is locked by 1/4”- 20 screws on both the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles or scratches

【FOR HANDHELD SHOOTING】This Top Handle from SmallRig features a shoe mount for microphone and LED lights, is designed for handheld shooting, can hold the weight of a large cage rig with various attachments with ease. The cage kit features a built-in Nato rail that allows you to quickly release accessories with NATO clamp. The handle attaches directly to the cage’s NATO rail on the top and is adjustable fore and aft

High Performance: The 15mm carbon fiber rod has good heat resistance, corrosion, rubbing performance

Smooth Coating: The smooth surface makes your installation more conveniently and comfortably

Lightweight: Weighs only 40g, lighter than traditional stainless-steel rods

SmallRig 15mm Carbon Fiber Rod (4" , 2-pack) 1871 is a pair of 4 inch long non-threaded rods featuring a carbon fiber pattern on the outer surface, which is highly rigid, lightweight and corrosion resistant

This pair of rods are 100mm long machined from hollow carbon fiber tubes

It is precision crafted for 15mm support systems, you can attach a wide variety of available accessories, such as follow focus, matteboxes and much more

☛Multiple Functions☚A versatile super camera clamp that can mounts onto anything like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other super clamps

☛Robust and durable☚The solid anti-rust stainless steel and black anodized aluminum alloy for high durability, Non-slip rubbers on the inner side protects your rig and reduces scratches

☛Multiple Thread Holes☚Comes with 1/4"-20 and 3/8"-16 thread for attaching a variety of accessories

【VERSATILITY】The super clamp is designed to mount onto anything like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. It's up to your imagination & inventive ideas.

【ADJUSTABLE JAW】The jaw opens to max about 1.57" (40mm), and minimum 15mm. You can clip it on anything less than 40mm thick and more than 15mm.

【FOR MORE ACCESSORIES】The clamp features 1/4’’ threaded holes and 3/8 threaded hole, which allow you to attach more accessories, such as ballhead 1135, magic arm 2070.

【7 in 1 MULTI-FUNCTION KIT】4 pieces Allen Wrenches: 2.5, 3, 4, 3/16; 1 slotted screwdriver; 1 Phillips screwdriver; 1 Torx T25 driver

【PORTABLE FOLDING TOOL SET】A pocket-sized folding tool set with a compact design for video photographers, also convenient to carry and store

【ADDITIONAL THREAD HOLES】The multi-tool set comes with additional M2.5, M3, M4, M5, 1/4 threaded holes on the side for keeping screws in reserve in case missing the original screws

【Standard Shoe Mount Compatible】could be mounted on any camera accessories with 1/4" and M2.5 threaded holes, such as cage, cold shoe block, handle and plate etc. Such as cage for Sony (a6500 a6300 a6500), cage for Panasonic (gh5 gh4 gh3)

【Wide Application】This shoe adapter allows you to attach a Microphone, Flash, LED, on camera Handle/cages/rig, etc. Fit for all the accessories with 1/4"-20 threaded holes

【Easy to Use】Secure tightly via the two M2.5 screws, and a 1/4" thread hole for you to attach to the camera cage, plate, handles, or other accessories

▶ OPEN TO 40MM： It is a Multi-Function Double Ball Head with bottom clamp and 1/4" screw, the clamp jaws open to 40mm. It could attach monitor or video light on the other end, while clamps the accessories with diameter less than 40mm, like stabilizer for DJI , stabilizer, video C-stand etc

▶ LOCK TIGHT：It can mount Monitors and led Lights to DSLR, 360 degree Articulation when shooting, this ball head has a single locking knob for fast and safe operation, 1/4" Screw on the top

▶ DIRECT MOUNTING：Can be mounted directly to a DSLR or camcorder's shoe mount and mounted directly to any rods, tube up to 40mm diameter, and allows for the attachment of a full array of video accessories

[Double Head 1/4" Male Screw] SmallRig Screw 828 comes with 2-piece screws with both ends of a 1/4" male screw, which is widely used on the connection of tripod, camera cage, short rods, tripod, or other places with 1/4"-20 threads

[Multi-functional] The screw adapter with standard 1/4"-20 screws can be used with tripods, monopods, telescopes, ball heads, lens collars, lens plates, etc

[High-Quality Material] Made of high-quality stainless steel, it is lightweight and durable. It is the optimum equipment for photographers/movie makers.

【TOP HANDLE】This SmallRig top handle equipped with built-in shoe mount for microphone and LED lights, is designed for handheld shooting, can holds the weight of a large cage rig with various attachments with ease.

【MOUNTING POINTS】The SmallRig camera handle with abundance of 1/4'' and 3/8'' mounting points, can attach different gears on it for additional attachment options and DIY operations, such as monitor mount 2905, magic arm 2065, wireless remote control 2924, shotgun microphone 3468, led light 3286

【COMPATIBLITY】This SmallRig camera handle grip can be attached to a camera cage directly with 2pcs 1/4” screws ( the adjustable space between two 1/4 inch screws is 30mm-40mm), Fits any cage with the standard 1/4”- 20 thread on top, such as SmallRig cage 2087, cage 2168, cage 3667, cage 1661 and most cages of SmallRig.

【UNIVERSAL USAGE】This SmallRig Baseplate 1674 is a simple and light base plate for the most popular cameras, such as for Sony a6500 a6600 a6300 a6400 a6000, Sony A7 series, for Panasonic GH5 GH6, for Canon R5 R6 R7 R10, for BMPCC 4K 6K Pro etc. It attaches to a camera with a 3/8" or 1/4" screw.

【15mm LWS ROD SYSTEM】The base plate features 15mm diameter and 60mm spaced rod clamps that allows you to mount two 15mm rods, then lens support or other accessories.

【RUBBER CUSHIONS】There are rubber cushions on the base plate, which increases friction for camera to prevent the twisting. Also, the rubber cushions can protect the camera be scratched.

【D to A connectivity】 The D to A cable offers you a convenient way to optimize your viewing. Connect digital cameras, camcorders, tablets, or other micro cable-enabled devices to the port on most displays to enjoy the high-definition audio and video.

【Ultra Thin & Flexible】The ultra-thin and flexible high-speed cable (55m/1.8ft) with 3.6mm diameter fits perfectly in tight spaces, designed for gimbal, camera stabilizer, and rigs applications where flexibility and compact cable routing is required.

【High-Speed Cable】Ultra thin 2.0 version standard cable supports Ultra HD 4K@60Hz, Full HD 1080P, 3D, Ethernet, Audio Return Channel(ARC), HDR, and you can transmit high-resolution sound formats.

【FULL ACCESSIBILITY】ONLY FITS FOR SONY A7RIII / A7III /A7M3 Camera. The cage would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. The hot shoe is accessible for Sony XLR-K2M/K1M

【PERFECT PROTECTION】The updated alpha A7RIII/A7III cage adds a second locking point on the right side to prevent from twisting. Two pieces of rubber cushion on the bottom that prevent the camera from scratching

【MOUNTING POINTS】Add plenty of 1/4"-20 and 3/8"-16 threaded holes for attaching more accessories. Also features locating holes for ARRI standard and a cold shoe on the top to attach corresponding accessories

【Quick Release Design & Lightweight and Foldable】Using the original developed quick release structure, it can be quickly installed and removed in just 15 seconds. The SmallRig parabolic softbox is foldable for easy storage, weighs only 1.4 kg and comes with a storage bag for easy portability. This is a very handy lightbox for those who use at multiple shooting locations.

【Enhancing the Shooting Effect】The softbox adopts a two-layer cloth structure made of Oxford cloth and high-grade reflective materials, with multi-layer coating. It is durable and reflective, while maintaining the original color temperature and color Rendering Index (CRI) while spreading the light more evenly and wider for improved shooting results.

【High Durability]】The SmallRig light softbox is supported by 16 ribs that form a rounded surface for a specific depth of surface effect. It adopts military umbrella ribs, which are lightweight and durable, high elasticity, and can withstand tens of thousands of presses without deformation. In addition, all the ribs of the umbrella are attached to the outside, which gives a smoother and more uniform coating effect on the inside, and does not affect the reflected light function inside.

Improved Design: 1. A cold shoe is added to the upper right corner of the cage to facilitate the installation of accessories such as Microphone 3468 and LED Video light 3286; 2. Two 1/4"-20 threaded holes with a spacing of 18mm are added at the bottom, which is compatible with SmallRig Quick Release Plate for Arca 3154. A QD hole is added at the bottom, which is compatible with QD quick release shoulder straps and other accessories.

For Sony A7R V/A7 IV/A7S III/A1/A7R IV: SmallRig Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. NOTE: The HDMI Cable Clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV because it will block the synchro terminal interface when used on the Alpha 7R V.

Multiple Mounting Points: The cage has multiple 1/4"-20 holes and 3/8"-16 positioning holes for ARRI, which can attach accessories such as the upper handle 3765, the side handle 2093, and the monitor stand 2903B. There are 2 built-in cold shoe interfaces, which can install microphones, fill lights and other equipment; the QD hole at the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and bottom of the cage to attach Wrist Strap PAC2456 and Shoulder Strap PSC2428.

Lightweight: SMALLRIG 15mm Carbon Fiber Rod (6", pair) 1872 is a pair of rigid, durable while lightweight rods that won't weigh down your camera support rig

Highly Rigid and Durable: This pair of rods are 150mm long machined from hollow carbon fiber tubes.Highly Rigid,durable and corrosion resistant

Attach 15mm Support System: SmallRig 15mm rod is precision crafted for 15mm support systems, you can attach a wide variety of available accessories, such as follow focus, matteboxes and much more

【Photography Screws Kit】: The SmallRig MD3184 includes Two 1/4”-20 flat head screws, eight 1/4”-20 hex screws for cages, L brackets, QR plates, baseplates, handles, rod clamps, top plates and monitors, two M4 and two M5 hex screws, two M3 trim head screws for mounting rosettes, two M2.5 hex screws used for cage anti-twisting and two 3/8”-16 flat head screws for QR plates and baseplates and 4 hex spanners(3/16、3、4、2/Flat Screwdriver)

【Magnetic Precision Screwdriver Set】: The 4 Psc hex keys are magnetically attracted to the storage plate which includes 3/16、3、4、2 Flat Screwdriver

【Convenience and Portable】: There are clear laser-engraved specification marks for conveniently accurate access. The storage plate comes with a flannel and a strap hole for easy storage and carrying.

【For A6300/A6000】The SmallRig Cage 1661 is a formfitting aluminum exoskeleton that protects your camera and offers mounting options to attach accessories. With the camera in the cage, you still have access to the SD card slot, battery compartment, and all camera controls.

【Cold shoe adapter】The A6300 / A6000 cage features a built-in cold shoe for attaching a microphone, articulating arm, or other light accessories

【Various Mounting Points】The built-in shoe mount is used to connect light accessories, such as a microphone, EVF mount and more. A 1/4’’-20 threaded hole at the front enables it to attach to 15mm Micro Rod with 1/4'' Thread 915 for follow focus.

【Length】Length of 16 inches / 40cm

【Diameter】The diameter of the rods is industrial 15mm standard

【Inner Thread】M12 inner thread on each end of a rod, so that you can use M12 rod end cap (SmallRig 1617) to prevent your accessories sliding from rods

【Length】Length of 4 inches / 10cm

【Diameter】The diameter of the rods is industrial 15mm standard

【Inner Thread】M12 inner thread on each end of a rod, so that you can use M12 rod end cap (SmallRig 1617) to prevent your accessories sliding from rods

【HIGH CUSTOMIZATION】SMALLRIG Adjustable Monitor Mount 2889 can hold your monitor or accessory onto the handheld stabilizers. The mount is compatible with DJI RONIN-S/RONIN-SC & ZHIYUN CRANE 2S/CRANE 3/3S/WEEBILL-S & MOZA AirCross 2 Gimbals. The monitor mount features three 1/4"-20 threads for additional accessories such as SmallRig Cold Shoe 1241 for microphone or sound receiver.

【ROSETTE MOUNTING PLATE FOR RONIN-S/SC】The mount attaches to the mounting threads for ZHIYUN CRANE 3, CRANE 3S, WEEBILL-S, or WEEBILL LAB with a built-in thumbscrew, and a rosette adapter plate is included to attach the mount to the DJI Ronin-S or Ronin-SC with two included M4 screws.

【ALSO FITS MOZA AIRCROSS 2】For Moza AirCross2, please do attach the Mounting Plate 2826 first before attaching the monitor mount

【TOP HANDLE】This SMALLRIG top handle equipped with two built-in shoe mounts for microphone, LED lights, is designed for handheld shooting, compatibility with small-sized mirrorless cameras: for Sony A7/A7r/A7s/A7II/A7RII/A7SII, A6000/A6300/A6500, for Panasonic G7, GH4, GH5, G85, for Fujifilm X-T2, etc.

【MOUNTING POINTS】The SMALLRIG camera handle with abundance of 1/4’’ and 3/8'' mounting points and two accessory mount for ARRI standard for rosette adapter for ARRI standard, can attach different SMALLRIG rigs on it for additional attachment options and DIY operations.Shoe mounts are found on front and at the back for attaching on cameras lights and microphones, monitor mounts, EVF mounts.

【COMPATIBLITY】This SMALLRIG camera handle grip can bolts on to two 1/4''-20 holes spaced 36mm apart center for secure camera carrying, Also, the SMALLRIG camera handle fits any cage with the standard 1/4-20 thread on top, such as SMALLRIG cage 2087, cage 2049, cage 1982, cage 1889 or any other cages of SMALLRIG.

【Quick Release Design & Lightweight and Foldable】Using the original developed quick release structure, it can be quickly installed and removed in just 15 seconds. The SmallRig parabolic softbox is foldable for easy storage, weighs only 1.1 kg and comes with a storage bag for easy portability. This is a very handy lightbox for those who use at multiple shooting locations.

【Enhancing the Shooting Effect】The softbox adopts a two-layer cloth structure made of Oxford cloth and high-grade reflective materials, with multi-layer coating. It is durable and reflective, while maintaining the original color temperature and color Rendering Index (CRI) while spreading the light more evenly and wider for improved shooting results.

【High Durability]】The SmallRig light softbox is supported by 16 ribs that form a rounded surface for a specific depth of surface effect. It adopts military umbrella ribs, which are lightweight and durable, high elasticity, and can withstand tens of thousands of presses without deformation. In addition, all the ribs of the umbrella are attached to the outside, which gives a smoother and more uniform coating effect on the inside, and does not affect the reflected light function inside.

【Multifunctional Magic Arm】The precise and durable designed Articulating Magic Friction Arm provides great versatility for the positioning of access.

【Get Perfect Angle】Double 360 degrees Ball Head Articulating design adjusts any angles based on your needs.

【Wide Compatibility】With 1/4" thread on both ends to install any on-camera flashlights, microphone, LCD monitor, DV Monitor, microphone on one end, and other accessories like a cage, handle, plates

【MINI BALL HEAD】SmallRig Mini Ball Head Mount 2059 is designed to attach the camera tightly via a cold shoe adapter, while the 1/4" screw could be mounted on the monitor in adjustable directions in different scenarios and could be locked via a wingnut.

【WIDE COMPATIBILITY】 The cold shoe adapter works for most cameras including for Canon, for Nikon, for Olympus, for Pentax, for Panasonic, for Fujifilm, for Kodak, etc

【ADJUSTABLE DIRECTION】The ball head can be adjusted into most any position for a better viewing angle

[High-Quality Material] This SmallRig ballhead mount clamp is made of aluminum alloy and stainless steel which is very well built and is very long-lasting. It is a perfect and study ballhead mount for people who love making videos.

[Multi-function Double Ballhead with Wide Compatibility] The 1138 muti-functional double ball head comes with a clamp at the bottom and a 1/4 inches screw on the top best for vlog/youtube/tiktok. It can mount monitor/small action camera/LED Lights/microphones/flash or any gears with a bottom 1/4" thread on its one end via 1/4" screw and then you can lock it on rod/tube/table/desk/tripod via the clamp tightened by the locking knob.

[Perfect Viewing Angle] The mounts are easily adjustable and can swivel 360-degrees which allows you to adjust your cameras at your desired angle.

【VERSATILITY】SmallRig 2732 comes with a super clamp with 1/4" and 3/8" threads and an articulating arm with 1/4” screws on both ends respectively

【SUPER CLAMP】This super cool clamp was made of lightweight aluminum alloy, comes with 1/4"-20 and 3/8"-16 thread and can be mounted virtually anywhere, such as cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. It can open maximum 54mm and minimum 15mm

【360°ROTATION】Double 360 degrees Ball Head Articulating design adjusts any angles based on your needs. With 1/4" thread on both ends to install any on-camera flash lights, microphone,LCD monitor,DV Monitor, microphone on one end and other accesorries like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc

【MAGIC ARM】Flexible and versatile magic arm: The articulating magic friction arm provides great versatility for the positioning of access with 90 degree pivotable and 360 degree rotatable ends

【EASY POSITION】The knob allows partial loosening for safe and precise positioning of a light or monitor

【WIDE COMPATIBILITY】Two 1/4-20 screws at each end included to install any on-camera flash lights, microphone,LCD monitor,DV Monitor, SmallRig quick release plate 3513

【STYLISH & THIN】CNC integrated molding, SmallRig Memory Card Case 2832 is an auxiliary product for photography enthusiasts.

【COMPATIBILITY】It can store three SD Cards and two Micro SD Cards, which is convenient for storing the memory cards of cameras, action cameras, drone, and mobile phones.

【ANTI-FALL & SCRATCH RESISTANCE】Each memory card has an independent safe space, which can quickly and safely slide into the card slot for storage.

SMALLRIG Standard Rosette Bolt-On Mount (M6 Thread) 1939 is a multi-functional Rosette (M6, 31.8mm diameter) mount

There are three 1/4-20" and four M2 threaded holes on this rosette mount

It can be attached to a cage, rosette handle and other accessories