Best Smileracing in 2026

Sheath Color: Black; Length: 100 FT

OD: 3/32" = 2.4mm; ID: 3/32" = 2.4mm; Voltage Rating: 600V

Operating Temperature: -55℃ to +135℃; Maximum Continious use Temperature: 135℃.

This industry standard DC pump dispenses up to 15 GPM (57 LPM).

Compatible with Diesel, Gasoline, Kerosene, E15, and Biodiesel up to B20

Features Thermal Protection and Bypass Value to Prevent Overloading during abnormal usage.

Front: approx.2 Pcs : 890 x 370mm; Rear: approx. 2 Pcs : 890 x 370mm

Material: Polyurethane (PU); Color: Black

Easy and quick to install and remove, a good companion for your car

【PACKAGE CONTENTS】1Pc LS fuel filter/58psi regulator, 1Pc 6AN 25 feet of high-pressure fuel injection hose, 1Pc 6AN to 3/8" Male Straight Filter Fittings, 1Pc 6AN to 5/16" Fuel Filter Return Line Fitting, 2Pcs 6AN to 3/8" Fuel Filter Feed Line Fittings, 2Pcs -6AN to 1/4" NPT Fuel Pump Adapters, 2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings, 6Pcs straight -6AN Female to 3/8" Push Lock hose fittings

【HIGH QUALITY】The Fuel Hose made of Premium Quality NBR Rubber; The hose end AN fittings is made of high strength Aluminum , polished and anodized surface provide the bright appearance, corrosion protection and strong strength.

【APPLICATION】Mostly used in LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85 hose, coolant, fuel. Used this on a LS swap, make it easier for the plumbing of fuel system to run all the way from your fuel tank to the engine.

Straight Reducer Silicone Hose,Inner diameter:63mm-76mm or 2.5"-3"

Length: 76mm or 3",Material: 3-ply Polyester Reinforced,4.5mm Thickness high-quality silicone,Size tolerance +/-0.5 mm

Working Pressure: 0.3Mpa (43.5 PSI) to 0.9Mpa (130.5 PSI),Bursting Pressure: 2Mpa,Working Temperature: -140°F (-60°C ) to +500°F (+260°C)

Upper Case Dimension: 18" x 9.5" x 12.8" (L x W x H)

Lower Cabinet Dimension(No Caster): 21" x 11" x 24.8" (L x W x H)

The cart is equipped with two-storey tools and has five drawers with a maximum load of 220.5lbs.

Material:Made of Polyolefin, Shrinkage Ratio:2:1 (will shrink to 1/2 its supplied diameter)

Suitable for electrical insulation, wire bundling, colour coding, mechanical protection, wire/cable joints and daily repairs etc

Comes with 560pcs heat shrink tube assorted in plastic box, 5 colors( Yellow, Blue, Black, Green, Red), 12 Specifications , satisfied for your different need

Safe and Environmental Friendly Material Shrink Wrap: Conform to UL224, CSA C22.2, RoHS standard. Electrical heat shrink tubing material composition does not contain heavy metal and other environmentally hazardous substances. No slowly or long-term virulence. No need to worry about your health when using innhom heat shrink wrap.

Premium Quality Heat Shrink Tubing Set: Excellent flame retardant (UL 224, VW-1) and insulation performance. Soft and flexible wire shrink wrap, low shrinkage temperature-minimum shrinkage temp: +158℉(+70°C), fast shrinkage, easy and convenient to use with a heat gun.

Effective and Long Lasting Protection: innhom heat tube shrink has the advantages of good tightness, acid and alkali resistance, durable and anti-aging. Shrink wrap wire tensile strength: 14 Mpa. Dielectric strength: >20kV/mm. Elongation at break: >400%. Volume resistivity: >1.0× 10^14Ω.cm. Cold-resistant bending -22℉(-30 °C) × 1h without cracking. Use innhom heat shrink tubes instead of ugly and short-lived electric tape.

Multi colors in separate compartments, classify easily.

Whenever you need to organize different wires, this is a good choice.

1/24"(80pcs),1/16"(80pcs),1/12"(100pcs),3/64"(30pcs),1/8"(60pcs),9/64"(30pcs),5/32"(70pcs),1/5"(30pcs),15/64"(20pcs),5/16"(20pcs),25/64"(60pcs)

【3:1 SHRINK RATIO & FAST CONTRACTION SPEED】Shrinks to 1/3 of its original diameter and seals extremely tightly, solving the problem of many 2:1 shrink tubes that don't shrink enough and therefore don't seal tightly enough. Shrink temperature: 80 to 125°C. Provides a professional connection within seconds.

【INCLUDES ADHESIVE COATING】When the heat shrink tube is heated, it automatically releases adhesive and seals the connection extremely reliably. This creates a waterproof and durable insulation with a satisfaction guarantee.

【DUAL WALL TUBING】The outer wall of the shrink tube provides extremely high abrasion resistance. The inner wall creates a consistently waterproof seal and excellent strain relief. Our solder connectors will also impress you!

Material: polyolefin

Main color: black & red

Shrink Ratio: 3:1, Round diameter: 3/4'', Length: 1.22M(4Ft)

★【Versatile & DIY Helper】- Multiple sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection.

★【Safe & ECO-Friendly】- Our heat shrink tubes are both UL & CSA certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, Formaldehyde (HCHO) Free, protect you and your famaily from toxins.

★【Customized Protector】- Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you and your kids DIY.

Diameter: 5/16"

Color: Red, Material: Polyethylene, Shrink Ratio: 3:1

Adhesive Adheres to: Most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C

3:1 Ratio | 270 pieces | Thin adhesive inside liner. | Double Color: Black&Red

6 Sizes: 1/16"(70 pcs), 3/32"(80 pcs), 1/8"(80 pcs), 3/16"(20 pcs), 1/4"(12 pcs), 3/8"(8 pcs)

Heat activated adhesive lining provides impermeable seal to salt water and other liquids.

3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough.

GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection, creating waterproof and long-lasting insulation.

VARIETY OF SIZES - We have included 7 most commonly used diameters ranging from 3/32" to 3/4". Shrink tubing is precut to 1.75 inches.

Top Quality & Stronger Retraction Ratio & ECO-Friendly : Made of high quality polyolefin, 3:1 stronger retraction ratio makes it more suitable for electrical isolation or insulation of the open wires or the connected one.Our heat shrink tubes are both UL & CSA certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, Formaldehyde (HCHO) Free

afe & Easy Used: Our heat shrink tubes has the advantages of good electrical insulation, good tightness and corrosion resistance, high temperature resistance. Cover the bare wire part with these tubes, heat it with soldering iron, heat gun or even hair dryer , the tube will shrink protect the wires and give you a professional look of the repair job! Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection.

Multiple sizes high-quality heat shrink tubing for your choos is very suitable for any project workshop，they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection，car audio install，solar and ATV setups.fixing the broken wires, electrical insulation, wire connection etc. You can also use it for allthe iphone and ipad charging cable and headset 。great for boat trailer wiring or for anyone who lives in a swamp。

3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough.

GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection, creating waterproof and long-lasting insulation.

VARIETY OF SIZES - We have included 7 most commonly used diameters ranging from 3/32" to 3/4". Shrink tubing is precut to 3.5 inches.

3:1 Heat shrink ratio tubing, will shrink up to 1/3 of the original diameter.

Double-wall glue inside adhesive lined, with coated hot melt adhesive to prompt the sealing waterproof performance.

4 Large size Φ1" Φ3/4" Φ1/2" Φ3/8", 2 color Black and Red.

3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough.

GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection. This creates waterproof and long-lasting insulation.

EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Make professional insulated connections in seconds.

3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough.

GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection, creating waterproof and long-lasting insulation.

VARIETY OF SIZES - We have included larger diameter heat shrink tubing ranging from 1/8" to 1". Shrink tubing is precut to 1.75 inches.

Diameter: 1/8"

Color: Black, Material: Polyethylene, Shrink Ratio: 3:1

Adhesive Adheres to: Most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C

3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough.

GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection. This creates waterproof and long-lasting insulation.

EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Make professional insulated connections in seconds.

Diameter: 1.5"

Color: Black, Material: Polyethylene, Shrink Ratio: 3:1

Adhesive Adheres to: Most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C

★【Versatile & DIY Helper】- Multiple sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection.

★【Safe & ECO-Friendly】- Our heat shrink tubes are both UL & CSA certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, Formaldehyde (HCHO) Free, protect you and your famaily.

★【Customized Protector】- Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you and your kids DIY.

Diameter: 3/4"

Color: Red, Material: Polyethylene, Shrink Ratio: 3:1

Adhesive Adheres to: Most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C

Diameter: 1/8"

Color: Red, Material: Polyethylene, Shrink Ratio: 3:1

Adhesive Adheres to: Most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C

Great variety of top pro-quality heat shrink tubing. Includes 6 different size diameter tubes each measuring 3 1/2" in length.

130 pieces total (3/32" x 9 Red/9 Black/9 Green/9 Blue/9 Yellow pcs, 1/8" x 7 Red/7 Black/7 Green/7 Blue/7 Yellow pcs, 3/16 x 4 Red/4 Black/4 Green/4 Blue/4 Yellow pcs, 1/4" x 3 Red/3 Black/3 Green/3 Blue/3 Yellow pcs, 3/8" x 2 Red/3 Black/1Green/1 Blue/1 Yellow pcs, 1/2" x 2 Red/2 Black/1 Green/1 Blue/1 Yellow pcs)

Heat activated adhesive lining provides impermeable seal to salt water and other liquids.

Diameter: 9/16"

Color: Red, Material: Polyethylene, Shrink Ratio: 3:1

Adhesive Adheres to: Most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C

Great variety of top pro-quality heat shrink tubing. Includes 3 different size diameter tubes each measuring 7" in length.

27 pieces total, over 15 Feet of Tubing included! (1/4" x 15 pcs, 1/2" x 7 pcs, 3/4 x 5 pcs)

Heat activated adhesive lining provides impermeable seal to salt water and other liquids.