Best Solarepic in 2026

Negative Ground 150V PV Input, Compatible with 12/24/36/48V Batteries (Lead Acid) Charging. Lithium Battery :LiFePO4/ Li(NiCoMn)O2,Only Solar Panel and Battery Connector Available

60 ampere Charging Current Max with big heat sink, Max. PV input power: 750W/12V battery, 1500W/24V battery , 2250W/36V battery, 3000W/48V battery system

Dual RS485 Port (RJ45 Connector), it can be paralleled up to 8 units together linked by 8pin ethernet cable to make the data monitoring easy and accurate.

Are you ready to take your solar energy game to the next level? Using a multi-stage, adaptive charging algorithm, the Victron Energy SmartSolar MPPT 100-Volt 15 amp is the ultimate solar charger for your batteries

With the latest and fastest technology, this charge controller maximizes energy-harvest from your solar panels, intelligently driving it to achieve full charge in the shortest possible time. It even has the power to recharge severely depleted batteries from 0 volts.

Easily program the charger for any battery type using 'presets' for common battery types or by creating your own 100% customized settings.

Built-in Bluetooth Smart: No dongle required

Ultra-fast Maximum Power Point Tracking (MPPT)

An overcharging of the battery can be prevented by all loads at the load output can be connected

Are you ready to take your solar energy game to the next level? Using a multi-stage, adaptive charging algorithm, the Victron Energy SmartSolar MPPT 100-Volt 50 amp is the ultimate solar charger for your batteries

With the latest and fastest technology, this charge controller maximizes energy-harvest from your solar panels, intelligently driving it to achieve full charge in the shortest possible time. It even has the power to recharge severely depleted batteries from 0 volts.

Thanks to the Victron Energy MPPT technology, every single drop of power available is squeezed out of your solar panels and stored, guaranteeing an efficient energy collection.

Factory crimped copper alloy cable terminals help ensure electrical connectivity and durability

Durable outside insulation helps protect copper cable from severe under hood conditions

Rated for continuous use temperatures up to 257 degrees Fahrenheit (125 degrees Celsius) for safety and dependability

4 AWG wire, fits 3/8" stud, 37 inches length

Tin plated 95% copper lugs for superior corrosion and oxidation resistance

SAE 4 GAUGE COPPER

【2 CABLES】This 6awg battery cable kit contain one 20inches positive (Red) and one 20inches negative (Black) power inverter cables. 3/8” ring terminal at each end. The Maximum operating current is 59.9A

【UL LISTED】Our cables are UL listed. UL testing makes sure that wire sizes are correct or devices can handle the amount of current they claim to be able to. They also ensure that products are constructed correctly for the highest safety

【TINNED COPPER】Our cables are made of solid copper with a tin plating cover with good stability, wear resistance, corrosion resistance, which improves the oxidation resistance of copper and maintains its conductivity better

Heavy Duty Battery Cables: These 4 AWG Battery Cables feature tinned copper ring terminals, made for use with DC up to 1000V; Also perfect for use with a Spartan Power 150A or 200A Fuse Kit

A Multitude of Uses: Great automotive cable replacements for any type of motorized vehicle, from trucks and cars to motorcycles and motorhomes, RVs, campers, boats, and golf carts; Ideal for DC applications that involve high-voltage batteries where pure copper is recommended

Cut to Length: Our cables are professionally finished with a premium-grade cut, crimping, and heat shrinking that deliver durability, endurance, and the highest performance; Our 100% copper cables are solid yet flexible enough to work in most applications

SmartSolar MPPT 100/30 Charge Controller

Cross-linked synthetic rubber insulator casing helps resist corrosion

Copper cables provide excellent conductivity

Overlapped casting and cable insulation helps protect cable from corrosion

Include factory crimped copper alloy cable terminals to ensure electrical connectivity and durability not found with emergency type bolt-on or spliced battery cable terminals

Features durable outside insulation to help protect the copper cable from severe under the hood conditions, such as oil, acid, heat, ozone, and road splash

GM-recommended replacement part for your GM vehicle's original factory component

Includes one black 2 gauge cable pre-assembled with marine grade cable lugs. Use selection tabs to select (1) terminal mounting hole stud size (5/16" both ends, 3/8" both ends, or one end 5/16" + one end 3/8") and (2) cable length (options range from 9 inches to 7 feet)

Manufactured with ultra-flexible WindyNation Power-Flex Cable. 100% fine stranded PURE COPPER cable for high amperage applications.

Made in the USA by WindyNation Inc. Cable is SAE J1127 compliant and rated for up to 600 volts from -50°C to +105°C.

COPPER CLAD ALUMINUM (CCA) - Our primary cable CCA wire is the most economical option for choosing power or ground wire and is a great conductor of power. Copper coated aluminum gives you an economic power cable with excellent power transfer. Systems that require more power should use ofc cable wiring.

POWER / GROUND WIRE SET - Our bundled power wire set is great for a car amplifier or subwoofer or to be used as a ground wire on your electric wire installs. Use for many different applications such as indoor lighting, car radio, automotive, lighting, car speakers, power cables, 12v power inverter, ground wire, or welding cable.

SOFT TOUCH JACKET - Soft touch jacket design designed for the electrical and auto repair installer in mind. Strong, yet durable pvc jacket that is best for indoor use but has flexibility, elasticity, and impact resistance built in.

Victron Energy SmartSolar Pluggable Control Display is a pluggable LCD display for Victron Energy SmartSolar Charge Controllers

Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display. Mounting Screws are included

With a crystal clear display, this is a great add-on for all Victron Energy SmartSolar charge controllers

Item Package Dimension:3.6 cm L X9.5 cm W X23.0 cm H

Item Package Weight:0.353 Kilograms

Product Type:Auto Battery

【12V/24V Automatically Detect】 Automatically detects the voltage of the battery system (for non-lithium batteries) and adjusts the charging parameters accordingly, ensuring that the battery is charged safely and efficiently.

【Full System Protection】 Designed to safeguard your solar system. It provides a comprehensive and reliable safeguard for your equipment and devices protection for overcharging, over-discharging, short-circuit, overload, reverse polarity, reverse current, and temperature compensation, keeping your devices and systems running smoothly and safely.

【Multiple Types of Charging Ports】 Integrated with 5V 2A USB ports, allowing you to conveniently charge your phones, tablets, and other USB-powered devices directly from the controller without the need for an additional power source or adapter. With a variety of charging options, this charge controller is perfect for those who need flexibility in their charging solutions.

Increases PV Solar Array Output to battery bank by up to 30%.

Designed for charging from your solar array to battery banks with nominal design voltages from 12 to 60 VDC

Fully Programmable and Built-in 128 Days of Data Logging.

High Reliability: Built for and tested in the toughest conditions the Tristar is over spec'd to ensure longevity and reliability in any condition.

Extensive electronic protection: against reverse polarity, short circuits, overcurrent and excessive temper.

High Efficiency: at low, medium, and high output power levels to maximize energy harvest and minimize heat buildup inside the controller.

Battery cables - 2ft/60cm 6 Gauge inverter cables contain set of positive (Red) and negative (Black) battery cables.

The battery cable is made of heavy duty 6 gauge wire, the tinned copper wires prevent corrosion and allow for more easily soldering, it's also very thick and durable.

Each cable has (1) 5/16'' ring terminal (already crimped), allowing it to fit over battery disconnects/switches.

Victron Energy BlueSolar MPPT 100-Volt 30 amp Solar Charge Controller maintains battery health, extending its life

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, Victron Energy BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time

Victron Energy MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage

Battery cables - 2ft/60cm 8 AWG gauge inverter cables contain set of positive (Red) and negative (Black) battery cables. The Maximum operating current is 36A.

The battery cable is made of heavy duty 8 gauge wire, the tinned copper wires prevent corrosion and allow for more easily soldering, it's also very thick and durable.

Each cable has (1) 3/8" ring terminal (already crimped), allowing it to fit over battery disconnects/switches.

Item Package Dimension:20.573 cm L X7.62 cm W X3.81 cm H

Item Package Weight:0.5 Pounds

Product Type:Auto Part

Victron Energy SmartSolar MPPT 150-Volt 35 amp, 12/24/48V Auto Select (software tool needed to select 36V): A solar charger gathers energy from your solar panels, and stores it in your batteries, Using the latest, fastest technology, Victron Energy SmartSolar MPPT maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time

Victron Energy SmartSolar MPPT charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged

By constantly monitoring the voltage and current output of your solar (PV) panels, Victron Energy MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage

Tracer AN series MPPT Charge Controller: 12V/24V/36V/48V Auto identifying system volt. Auto control system to limit the charging power & current go over the rated value.

100 amp Charge Controller Max Input Solar Panel Power: 1250W/12V, 2500W/24V, 3750W/36V, 5000W/48V. Max input Voltage: 150V. Real-time energy recording and statistical.

100A Solar Controller MPPT support for 4 type Battery charging: Litium, Lead-acid (Sealed, AGM, Gel, Flooded) and User. Battery temperature compensation function to ensure the controller’s life.

Victron Energy BlueSolar MPPT 75-Volt 10 amp Solar Charge Controller maintains battery health, extending its life

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, Victron Energy BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time

Victron Energy MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage

Heavy Duty Battery Cables: These 4 AWG Battery Cables feature tinned copper ring terminals, made for use with DC up to 1000V; Also perfect for use with a Spartan Power 150A or 200A Fuse Kit

A Multitude of Uses: Great automotive cable replacements for any type of motorized vehicle, from trucks and cars to motorcycles and motorhomes, RVs, campers, boats, and golf carts; Ideal for DC applications that involve high-voltage batteries where pure copper is recommended

Cut to Length: Our cables are professionally finished with a premium-grade cut, crimping, and heat shrinking that deliver durability, endurance, and the highest performance; Our 100% copper cables are solid yet flexible enough to work in most applications

UPGRADED SOLAR PANEL CONTROLLER: Compatible with 12V 24V system.This solar charge controller helps you manage the working of solar panels and battery in solar systems automatically with the build-in industrial microcontroller. You don't need to reset it when the battery runs out cause it will memorize various parameters set by the user. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2.5A (max).

SAFE TO USE: Equipped with overcurrent protection, short-circuit protection, inverse connection protection, low voltage, and overcharge protection, and have fully 3-stage PWM charge management. This 30A solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery.

PLEASE NOTE: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries. The solar controller will turn off automatically to protect the lifespan of your battery if the voltage of the battery drop below 8V.

【Innovative MPPT Design】Die-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98%. It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day.

【12V/24V Automatically Detect】Automatically detects 12V or 24V DC system voltages (for Non-Lithium battery types), and the LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.

【Full System Protection】Meant to safeguard your system, the self-diagnostic capability can assess and protect against reverse polarity, battery overcharging, battery over-discharging, overload, short-circuiting, and reverse current.

WIDE COMPATIBILITY: The solar charger controller with 30A rated discharge current is compatible with 12V or 24V system automatically, suitable for lead-acid batteries: OPEN, AGM, GEL. Dual USB 5V/3A output ports support mobile phones, tablet PCs or other devices that require 5V voltage. Please read the manual carefully.

RELIABLE PROTECTION: EEEKit solar charge regulator provides over-current protection, short-circuit protection, inverse connection protection, low voltage and overcharge protection, a reliable protector for your devices.

INTELLIGENT DESIGN: Build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out. The solar controller will turn off automatically once the voltage is too low.

Max Input Current: 60 amp; Rate Input Solar Power: 780W(12V); 1560W(24V); 2340W(36V); 3120W(48V)(The maximum input power must not exceed 1.5 times the rated power ); Max input Voltage: 150V; Auto control system to limit the charging power & current go over the rated value.Common NEGATIVE Ground and TROUBLESHOOTING function( fault LED indicator).

60A Mppt Charge Controller support for 4 type Battery charging : Litium, Lead-acid (Sealed, AGM, Gel, Flooded) and User (user couldn’t set Lithium). Battery temperature compensation function to ensure the controller’s life.(The PV input voltage must be at least 2V greater than the battery voltage to charge )

RS-485 communication bus interface and Modbus communication protocol, available to meet various communication requirements in different situations.